| Age | Commit message (Collapse) | Author |
|---|
|
Replace the RISCV_ISA_V dependency of the RISC-V crypto code with
RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS, which implies RISCV_ISA_V as
well as vector unaligned accesses being efficient.
This is necessary because this code assumes that vector unaligned
accesses are supported and are efficient. (It does so to avoid having
to use lots of extra vsetvli instructions to switch the element width
back and forth between 8 and either 32 or 64.)
This was omitted from the code originally just because the RISC-V kernel
support for detecting this feature didn't exist yet. Support has now
been added, but it's fragmented into per-CPU runtime detection, a
command-line parameter, and a kconfig option. The kconfig option is the
only reasonable way to do it, though, so let's just rely on that.
Fixes: eb24af5d7a05 ("crypto: riscv - add vector crypto accelerated AES-{ECB,CBC,CTR,XTS}")
Fixes: bb54668837a0 ("crypto: riscv - add vector crypto accelerated ChaCha20")
Fixes: 600a3853dfa0 ("crypto: riscv - add vector crypto accelerated GHASH")
Fixes: 8c8e40470ffe ("crypto: riscv - add vector crypto accelerated SHA-{256,224}")
Fixes: b3415925a08b ("crypto: riscv - add vector crypto accelerated SHA-{512,384}")
Fixes: 563a5255afa2 ("crypto: riscv - add vector crypto accelerated SM3")
Fixes: b8d06352bbf3 ("crypto: riscv - add vector crypto accelerated SM4")
Cc: stable@vger.kernel.org
Reported-by: Vivian Wang <wangruikang@iscas.ac.cn>
Closes: https://lore.kernel.org/r/b3cfcdac-0337-4db0-a611-258f2868855f@iscas.ac.cn/
Reviewed-by: Jerry Shih <jerry.shih@sifive.com>
Link: https://lore.kernel.org/r/20251206213750.81474-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Just cleanups and fixes"
* tag 'mips_6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Fix whitespace damage in r4k_wait from VS timer fix
mips: kvm: simplify kvm_mips_deliver_interrupts()
MIPS: alchemy: mtx1: switch to static device properties
mips: Remove __GFP_HIGHMEM masking
MIPS: ftrace: Fix memory corruption when kernel is located beyond 32 bits
MIPS: dts: Always descend vendor subdirectories
mips: configs: loongson1: Update defconfig
MIPS: Fix HOTPLUG_PARALLEL dependency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-auto
Pull __auto_type to auto conversion from Peter Anvin:
"Convert '__auto_type' to 'auto', defining a macro for 'auto' unless
C23+ is in use"
* tag 'auto-type-conversion-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-auto:
tools/virtio: replace "__auto_type" with "auto"
selftests/bpf: replace "__auto_type" with "auto"
arch/x86: replace "__auto_type" with "auto"
arch/nios2: replace "__auto_type" and adjacent equivalent with "auto"
fs/proc: replace "__auto_type" with "const auto"
include/linux: change "__auto_type" to "auto"
compiler_types.h: add "auto" as a macro for "__auto_type"
|
|
Let's properly adjust BALLOON_MIGRATE like the other drivers.
Note that the INFLATE/DEFLATE events are triggered from the core when
enqueueing/dequeueing pages.
This was found by code inspection.
Link: https://lkml.kernel.org/r/20251021100606.148294-3-david@redhat.com
Fixes: fe030c9b85e6 ("powerpc/pseries/cmm: Implement balloon compaction")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
CONFIG_BALLOON_COMPACTION
Patch series "powerpc/pseries/cmm: two smaller fixes".
Two smaller fixes identified while doing a bigger rework.
This patch (of 2):
We always have to initialize the balloon_dev_info, even when compaction is
not configured in: otherwise the containing list and the lock are left
uninitialized.
Likely not many such configs exist in practice, but let's CC stable to
be sure.
This was found by code inspection.
Link: https://lkml.kernel.org/r/20251021100606.148294-1-david@redhat.com
Link: https://lkml.kernel.org/r/20251021100606.148294-2-david@redhat.com
Fixes: fe030c9b85e6 ("powerpc/pseries/cmm: Implement balloon compaction")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If amd_uncore_event_init() fails, return an error irrespective of the
pmu_version. Setting hwc->config should be safe even if there is an
error so use this opportunity to simplify the code.
Closes: https://lore.kernel.org/all/aTaI0ci3vZ44lmBn@stanley.mountain/
Fixes: d6389d3ccc13 ("perf/x86/amd/uncore: Refactor uncore management")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/076935e23a70335d33bd6e23308b75ae0ad35ba2.1765268667.git.sandipan.das@amd.com
|
|
Group is_permission_fault() with is_translation_fault(), which is
needed to use is_permission_fault() in __do_kernel_fault(). As
this is static inline, there is no need for this to be under
CONFIG_MMU.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
In the inline assembly inside load_unaligned_zeropad(), the "addr" is
constrained as input-only operand. The compiler assumes that on exit
from the asm statement these operands contain the same values as they
had before executing the statement, but when kernel page fault happened, the assembly fixup code "bic %2 %2, #0x3" modify the value of "addr", which may lead to an unexpected behavior.
Use a temporary variable "tmp" to handle it, instead of modifying the
input-only operand, just like what arm64's load_unaligned_zeropad()
does.
Fixes: b9a50f74905a ("ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs")
Co-developed-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Signed-off-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Signed-off-by: Liyuan Pang <pangliyuan1@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Replace instances of "__auto_type" with "auto" in:
arch/x86/include/asm/bug.h
arch/x86/include/asm/string_64.h
arch/x86/include/asm/uaccess_64.h
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
|
|
Replace uses of "__auto_type" in arch/nios2/include/asm/uaccess.h with
"auto", and equivalently convert an adjacent cast to the analogous
form.
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
|
|
Similar in nature to ab107276607af90b13a5994997e19b7b9731e251. glibc-2.42
drops the legacy termio struct, but the ioctls.h header still defines some
TC* constants in terms of termio (via sizeof). Hardcode the values instead.
This fixes building Python for example, which falls over like:
./Modules/termios.c:1119:16: error: invalid application of 'sizeof' to incomplete type 'struct termio'
Link: https://bugs.gentoo.org/961769
Link: https://bugs.gentoo.org/962600
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/6ebd3451908785cad53b50ca6bc46cfe9d6bc03c.1764922497.git.sam@gentoo.org
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
|
|
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with uapi headers that
rather should use __ASSEMBLER__ instead. So let's standardize now
on the __ASSEMBLER__ macro that is provided by the compilers.
This is a completely mechanical patch (done with a simple "sed -i"
statement).
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20251121100044.282684-2-thuth@redhat.com
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Enhancements to Linux as the root partition for Microsoft Hypervisor:
- Support a new mode called L1VH, which allows Linux to drive the
hypervisor running the Azure Host directly
- Support for MSHV crash dump collection
- Allow Linux's memory management subsystem to better manage guest
memory regions
- Fix issues that prevented a clean shutdown of the whole system on
bare metal and nested configurations
- ARM64 support for the MSHV driver
- Various other bug fixes and cleanups
- Add support for Confidential VMBus for Linux guest on Hyper-V
- Secure AVIC support for Linux guests on Hyper-V
- Add the mshv_vtl driver to allow Linux to run as the secure kernel in
a higher virtual trust level for Hyper-V
* tag 'hyperv-next-signed-20251207' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (58 commits)
mshv: Cleanly shutdown root partition with MSHV
mshv: Use reboot notifier to configure sleep state
mshv: Add definitions for MSHV sleep state configuration
mshv: Add support for movable memory regions
mshv: Add refcount and locking to mem regions
mshv: Fix huge page handling in memory region traversal
mshv: Move region management to mshv_regions.c
mshv: Centralize guest memory region destruction
mshv: Refactor and rename memory region handling functions
mshv: adjust interrupt control structure for ARM64
Drivers: hv: use kmalloc_array() instead of kmalloc()
mshv: Add ioctl for self targeted passthrough hvcalls
Drivers: hv: Introduce mshv_vtl driver
Drivers: hv: Export some symbols for mshv_vtl
static_call: allow using STATIC_CALL_TRAMP_STR() from assembly
mshv: Extend create partition ioctl to support cpu features
mshv: Allow mappings that overlap in uaddr
mshv: Fix create memory region overlap check
mshv: add WQ_PERCPU to alloc_workqueue users
Drivers: hv: Use kmalloc_array() instead of kmalloc()
...
|
|
If an APICv status updated was pended while L2 was active, immediately
refresh vmcs01's controls instead of pending KVM_REQ_APICV_UPDATE as
kvm_vcpu_update_apicv() only calls into vendor code if a change is
necessary.
E.g. if APICv is inhibited, and then activated while L2 is running:
kvm_vcpu_update_apicv()
|
-> __kvm_vcpu_update_apicv()
|
-> apic->apicv_active = true
|
-> vmx_refresh_apicv_exec_ctrl()
|
-> vmx->nested.update_vmcs01_apicv_status = true
|
-> return
Then L2 exits to L1:
__nested_vmx_vmexit()
|
-> kvm_make_request(KVM_REQ_APICV_UPDATE)
vcpu_enter_guest(): KVM_REQ_APICV_UPDATE
-> kvm_vcpu_update_apicv()
|
-> __kvm_vcpu_update_apicv()
|
-> return // because if (apic->apicv_active == activate)
Reported-by: Chao Gao <chao.gao@intel.com>
Closes: https://lore.kernel.org/all/aQ2jmnN8wUYVEawF@intel.com
Fixes: 7c69661e225c ("KVM: nVMX: Defer APICv updates while L2 is active until L1 is active")
Cc: stable@vger.kernel.org
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
[sean: write changelog]
Link: https://patch.msgid.link/20251205231913.441872-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The APICv (apic->apicv_active) can be activated or deactivated at runtime,
for instance, because of APICv inhibit reasons. Intel VMX employs different
mechanisms to virtualize LAPIC based on whether APICv is active.
When APICv is activated at runtime, GUEST_INTR_STATUS is used to configure
and report the current pending IRR and ISR states. Unless a specific vector
is explicitly included in EOI_EXIT_BITMAP, its EOI will not be trapped to
KVM. Intel VMX automatically clears the corresponding ISR bit based on the
GUEST_INTR_STATUS.SVI field.
When APICv is deactivated at runtime, the VM_ENTRY_INTR_INFO_FIELD is used
to specify the next interrupt vector to invoke upon VM-entry. The
VMX IDT_VECTORING_INFO_FIELD is used to report un-invoked vectors on
VM-exit. EOIs are always trapped to KVM, so the software can manually clear
pending ISR bits.
There are scenarios where, with APICv activated at runtime, a guest-issued
EOI may not be able to clear the pending ISR bit.
Taking vector 236 as an example, here is one scenario.
1. Suppose APICv is inactive. Vector 236 is pending in the IRR.
2. To handle KVM_REQ_EVENT, KVM moves vector 236 from the IRR to the ISR,
and configures the VM_ENTRY_INTR_INFO_FIELD via vmx_inject_irq().
3. After VM-entry, vector 236 is invoked through the guest IDT. At this
point, the data in VM_ENTRY_INTR_INFO_FIELD is no longer valid. The guest
interrupt handler for vector 236 is invoked.
4. Suppose a VM exit occurs very early in the guest interrupt handler,
before the EOI is issued.
5. Nothing is reported through the IDT_VECTORING_INFO_FIELD because
vector 236 has already been invoked in the guest.
6. Now, suppose APICv is activated. Before the next VM-entry, KVM calls
kvm_vcpu_update_apicv() to activate APICv.
7. Unfortunately, GUEST_INTR_STATUS.SVI is not configured, although
vector 236 is still pending in the ISR.
8. After VM-entry, the guest finally issues the EOI for vector 236.
However, because SVI is not configured, vector 236 is not cleared.
9. ISR is stalled forever on vector 236.
Here is another scenario.
1. Suppose APICv is inactive. Vector 236 is pending in the IRR.
2. To handle KVM_REQ_EVENT, KVM moves vector 236 from the IRR to the ISR,
and configures the VM_ENTRY_INTR_INFO_FIELD via vmx_inject_irq().
3. VM-exit occurs immediately after the next VM-entry. The vector 236 is
not invoked through the guest IDT. Instead, it is saved to the
IDT_VECTORING_INFO_FIELD during the VM-exit.
4. KVM calls kvm_queue_interrupt() to re-queue the un-invoked vector 236
into vcpu->arch.interrupt. A KVM_REQ_EVENT is requested.
5. Now, suppose APICv is activated. Before the next VM-entry, KVM calls
kvm_vcpu_update_apicv() to activate APICv.
6. Although APICv is now active, KVM still uses the legacy
VM_ENTRY_INTR_INFO_FIELD to re-inject vector 236. GUEST_INTR_STATUS.SVI is
not configured.
7. After the next VM-entry, vector 236 is invoked through the guest IDT.
Finally, an EOI occurs. However, due to the lack of GUEST_INTR_STATUS.SVI
configuration, vector 236 is not cleared from the ISR.
8. ISR is stalled forever on vector 236.
Using QEMU as an example, vector 236 is stuck in ISR forever.
(qemu) info lapic 1
dumping local APIC state for CPU 1
LVT0 0x00010700 active-hi edge masked ExtINT (vec 0)
LVT1 0x00010400 active-hi edge masked NMI
LVTPC 0x00000400 active-hi edge NMI
LVTERR 0x000000fe active-hi edge Fixed (vec 254)
LVTTHMR 0x00010000 active-hi edge masked Fixed (vec 0)
LVTT 0x000400ec active-hi edge tsc-deadline Fixed (vec 236)
Timer DCR=0x0 (divide by 2) initial_count = 0 current_count = 0
SPIV 0x000001ff APIC enabled, focus=off, spurious vec 255
ICR 0x000000fd physical edge de-assert no-shorthand
ICR2 0x00000000 cpu 0 (X2APIC ID)
ESR 0x00000000
ISR 236
IRR 37(level) 236
The issue isn't applicable to AMD SVM as KVM simply writes vmcb01 directly
irrespective of whether L1 (vmcs01) or L2 (vmcb02) is active (unlike VMX,
there is no need/cost to switch between VMCBs). In addition,
APICV_INHIBIT_REASON_IRQWIN ensures AMD SVM AVIC is not activated until
the last interrupt is EOI'd.
Fix the bug by configuring Intel VMX GUEST_INTR_STATUS.SVI if APICv is
activated at runtime.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://patch.msgid.link/20251110063212.34902-1-dongli.zhang@oracle.com
[sean: call out that SVM writes vmcb01 directly, tweak comment]
Link: https://patch.msgid.link/20251205231913.441872-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
All objects are supposed to have a minimal alignment of two, since a
couple of instructions only work with even addresses. Add the missing
align statement for the file string.
Fixes: 6584ff203aec ("bugs/s390: Use 'cond_str' in __EMIT_BUG()")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Fallback to generic BUG implementation in case CONFIG_BUG is disabled.
This restores the old behaviour before 'cond_str' support was added.
It probably doesn't matter, since nobody should disable CONFIG_BUG, but at
least this is consistent to before.
Fixes: 6584ff203aec ("bugs/s390: Use 'cond_str' in __EMIT_BUG()")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
A few checks were missing in gmap_helper_zap_one_page(), which can lead
to memory corruption in the guest under specific circumstances.
Add the missing checks.
Fixes: 5deafa27d9ae ("KVM: s390: Fix to clear PTE when discarding a swapped page")
Cc: stable@vger.kernel.org
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add loongson32_defconfig (for 32BIT) and rename loongson3_defconfig to
loongson64_defconfig (for 64BIT).
Also adjust graphics drivers, such as FB_EFI is replaced with EFIDRM.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Adjust VDSO/VSYSCALL because read_cpu_id() for 32BIT/64BIT are
different, and LoongArch32 doesn't support GENERIC_GETTIMEOFDAY now
(will be supported in future).
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Adjust misc routines for both 32BIT and 64BIT, including: bitops, bswap,
checksum, string, jump label, unaligned access emulator, suspend/wakeup
routines, etc.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Adjust user accessors for both 32BIT and 64BIT, including: get_user(),
put_user(), copy_user(), clear_user(), etc.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Adjust system call for both 32BIT and 64BIT, including: add the uapi
unistd_{32,64}.h and syscall_table_{32,64}.h inclusion, add sys_mmap2()
definition, change the system call entry routines, etc.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Adjust module loader for both 32BIT and 64BIT, including: change the s64
type to long, change the u64 type to unsigned long, change the plt entry
definition and handling, etc.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Adjust time routines for both 32BIT and 64BIT, including: rdtime_h() /
rdtime_l() definitions for 32BIT and rdtime_d() definition for 64BIT,
get_cycles() and get_cycles64() definitions for 32BIT/64BIT, show time
frequency info ("CPU MHz" and "BogoMIPS") in /proc/cpuinfo, etc.
Use do_div() for division which works on both 32BIT and 64BIT platforms.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Adjust process management for both 32BIT and 64BIT, including: CPU
context switching, FPU loading/restoring, process dumping and process
tracing routines.
Q: Why modify switch.S?
A: LoongArch32 has no ldptr.d/stptr.d instructions, and asm offsets of
thead_struct members are too large to be filled in the 12b immediate
field of ld.w/st.w.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Adjust memory management for both 32BIT and 64BIT, including: address
space definition, DMW CSR definition, page table bits definition, boot
time detection of VA/PA bits, page table init, tlb exception handling,
copy_page/clear_page/dump_tlb libraries, etc.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Yawei Li <liyawei@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Adjust boot & setup for both 32BIT and 64BIT, including: efi header
definition, MAX_IO_PICS definition, kernel entry and environment setup
routines, etc.
Add a fallback path in fdt_cpu_clk_init() to avoid 0MHz in /proc/cpuinfo
if there is no valid clock freq from firmware.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
s390 is one of the last architectures using the legacy API for setup and
teardown of PCI MSI IRQs. Migrate the s390 IRQ allocation and teardown
to the MSI parent domain API. For details, see:
https://lore.kernel.org/lkml/20221111120501.026511281@linutronix.de
In detail, create an MSI parent domain for each PCI domain. When a PCI
device sets up MSI or MSI-X IRQs, the library creates a per-device IRQ
domain for this device, which is used by the device for allocating and
freeing IRQs.
The per-device domain delegates this allocation and freeing to the
parent-domain. In the end, the corresponding callbacks of the parent
domain are responsible for allocating and freeing the IRQs.
The allocation is split into two parts:
- zpci_msi_prepare() is called once for each device and allocates the
required resources. On s390, each PCI function has its own airq
vector and a summary bit, which must be configured once per function.
This is done in prepare().
- zpci_msi_alloc() can be called multiple times for allocating one or
more MSI/MSI-X IRQs. This creates a mapping between the virtual IRQ
number in the kernel and the hardware IRQ number.
Freeing is split into two counterparts:
- zpci_msi_free() reverts the effects of zpci_msi_alloc() and
- zpci_msi_teardown() reverts the effects of zpci_msi_prepare(). This is
called once when all IRQs are freed before a device is removed.
Since the parent domain in the end allocates the IRQs, the hwirq
encoding must be unambiguous for all IRQs of all devices. This is
achieved by encoding the hwirq using the devfn and the MSI index.
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Tobias Schumacher <ts@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
After support for VIRT_XFER_TO_GUEST_WORK is available for s390 it is
possible to also select HAVE_POSIX_CPU_TIMERS_TASK_WORK. See [1] for the
reasons why it makes sense, also for architectures which do not support
PREEMPT_RT.
[1] https://lore.kernel.org/all/20200716201923.228696399@linutronix.de
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Teach the memory hotplug path to tear down KASAN shadow that
was mapped during early boot when a memory block is offlined.
Track for each sclp_mem whether its range was covered by the early
KASAN shadow via an early_shadow_mapped flag. When such a block is
deconfigured and removed via sclp_config_mem_store(), compute the
corresponding shadow range and call vmemmap_free() to unmap the
boot mapped shadow, then clear the flag.
Using vmemmap_free() for the early shadow is safe despite the use
of large mappings in the boot-time KASAN setup. The initial shadow
is mapped with 1M and 2G pages, where possible. The minimum hotplug
memory block size is 128M and always aligned (the identity mapping
is at least 2G aligned), which corresponds to a 16M chunk of at
least 1M aligned shadow. PMD-mapped 1M shadow pages therefore
never need splitting, and PUD-mapped 2G shadow pages can now be
split following the preceding changes.
Relax the modify_pagetable() sanity check in vmem so that, with
KASAN enabled, it may also operate on the KASAN shadow region in
addition to the 1:1 mapping and vmemmap area. This allows the KASAN
shadow unmapping to reuse the common vmem helpers.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Export split_pud_page() so it can be used from the vmem code and teach
modify_pud_table() to split PUD-sized mappings when only a subrange
needs to be removed.
If the range to be removed covers a full PUD-sized mapping, keep the
existing behavior: clear the PUD entry and free the backing large page
(for non-direct mappings). Otherwise, split the PUD-mapped page into
PMD mappings and let the walker handle the smaller ranges.
This is needed for KASAN early shadow removal support: memory hotplug
freeing the KASAN early shadow is the only expected caller that will
try to free 2G PUD-mapped regions of non-direct mappings.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Make boot_pte_alloc() always allocate a full PAGE_SIZE page for
PTE tables, instead of carving two 2K PTE tables out of a single
4K page, similar to commit daa8af80d283 ("s390/mm: Allocate page
table with PAGE_SIZE granularity").
This mirrors the change in the vmem code and ensures that boot page
tables backing the early KASAN shadow can later be fully freed by
the vmem page-table teardown helpers (e.g. when unmapping early
KASAN shadow on memory hotplug).
The leftover-based allocation was originally added to reduce physmem
allocator fragmentation when EDAT was disabled. On current hardware
EDAT1 is available on all production systems, so the complexity is no
longer justified and gets in the way of freeing the shadow mappings.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
ALSA 0.9.0-rc3 is from 2002, 23 years old.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Acked-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251203-old-alsa-v1-1-ac80704f52c3@ixit.cz
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.19-rc1. Nothing
major at all, just small constant churn to make the tty layer
"cleaner" as well as serial driver updates and even a new test added!
Included in here are:
- More tty/serial cleanups from Jiri
- tty tiocsti test added to hopefully ensure we don't regress in this
area again
- sc16is7xx driver updates
- imx serial driver updates
- 8250 driver updates
- new hardware device ids added
- other minor serial/tty driver cleanups and tweaks
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (60 commits)
serial: sh-sci: Fix deadlock during RSCI FIFO overrun error
dt-bindings: serial: rsci: Drop "uart-has-rtscts: false"
LoongArch: dts: Add uart new compatible string
serial: 8250: Add Loongson uart driver support
dt-bindings: serial: 8250: Add Loongson uart compatible
serial: 8250: add driver for KEBA UART
serial: Keep rs485 settings for devices without firmware node
serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms
serial: qcom-geni: Enable PM runtime for serial driver
serial: sprd: Return -EPROBE_DEFER when uart clock is not ready
tty: serial: samsung: Declare earlycon for Exynos850
serial: icom: Convert PCIBIOS_* return codes to errnos
serial: 8250-of: Fix style issues in 8250_of.c
serial: add support of CPCI cards
serial: mux: Fix kernel doc for mux_poll()
tty: replace use of system_unbound_wq with system_dfl_wq
serial: 8250_platform: simplify IRQF_SHARED handling
serial: 8250: make share_irqs local to 8250_platform
serial: 8250: move skip_txen_test to core
serial: drop SERIAL_8250_DEPRECATED_OPTIONS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
"A fix which allows booting on the very old 710 workstations, and two
fixes in the syscall entry/exit path which allow to execute 64-bit
userspace binaries.
Note that although we currently have a 64-bit (static) kernel to allow
more than 4 GB physical RAM, there is no support for 64-bit userspace
for parisc-linux yet, but Dave and Sven are making slowly progress to
port and fix glibc and gcc.
Summary:
- Fix boot on 710 workstation by not reprogramming ASP chip
- Fix 64bit userspace syscalls (64-bit userspace is still being
developed)
- minor code cleanups in asm/bug.h and perf_regs.c"
* tag 'parisc-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Do not reprogram affinitiy on ASP chip
parisc: Drop linux/kernel.h include from asm/bug.h header
parisc: remove unneeded semicolon in perf_regs.c
parisc: entry.S: fix space adjustment on interruption for 64-bit userspace
parisc: entry: set W bit for !compat tasks in syscall_restore_rfi()
parisc: Drop padding fields and layers entries from inventory log
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "panic: sys_info: Refactor and fix a potential issue" (Andy Shevchenko)
fixes a build issue and does some cleanup in ib/sys_info.c
- "Implement mul_u64_u64_div_u64_roundup()" (David Laight)
enhances the 64-bit math code on behalf of a PWM driver and beefs up
the test module for these library functions
- "scripts/gdb/symbols: make BPF debug info available to GDB" (Ilya Leoshkevich)
makes BPF symbol names, sizes, and line numbers available to the GDB
debugger
- "Enable hung_task and lockup cases to dump system info on demand" (Feng Tang)
adds a sysctl which can be used to cause additional info dumping when
the hung-task and lockup detectors fire
- "lib/base64: add generic encoder/decoder, migrate users" (Kuan-Wei Chiu)
adds a general base64 encoder/decoder to lib/ and migrates several
users away from their private implementations
- "rbree: inline rb_first() and rb_last()" (Eric Dumazet)
makes TCP a little faster
- "liveupdate: Rework KHO for in-kernel users" (Pasha Tatashin)
reworks the KEXEC Handover interfaces in preparation for Live Update
Orchestrator (LUO), and possibly for other future clients
- "kho: simplify state machine and enable dynamic updates" (Pasha Tatashin)
increases the flexibility of KEXEC Handover. Also preparation for LUO
- "Live Update Orchestrator" (Pasha Tatashin)
is a major new feature targeted at cloud environments. Quoting the
cover letter:
This series introduces the Live Update Orchestrator, a kernel
subsystem designed to facilitate live kernel updates using a
kexec-based reboot. This capability is critical for cloud
environments, allowing hypervisors to be updated with minimal
downtime for running virtual machines. LUO achieves this by
preserving the state of selected resources, such as memory,
devices and their dependencies, across the kernel transition.
As a key feature, this series includes support for preserving
memfd file descriptors, which allows critical in-memory data, such
as guest RAM or any other large memory region, to be maintained in
RAM across the kexec reboot.
Mike Rappaport merits a mention here, for his extensive review and
testing work.
- "kexec: reorganize kexec and kdump sysfs" (Sourabh Jain)
moves the kexec and kdump sysfs entries from /sys/kernel/ to
/sys/kernel/kexec/ and adds back-compatibility symlinks which can
hopefully be removed one day
- "kho: fixes for vmalloc restoration" (Mike Rapoport)
fixes a BUG which was being hit during KHO restoration of vmalloc()
regions
* tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (139 commits)
calibrate: update header inclusion
Reinstate "resource: avoid unnecessary lookups in find_next_iomem_res()"
vmcoreinfo: track and log recoverable hardware errors
kho: fix restoring of contiguous ranges of order-0 pages
kho: kho_restore_vmalloc: fix initialization of pages array
MAINTAINERS: TPM DEVICE DRIVER: update the W-tag
init: replace simple_strtoul with kstrtoul to improve lpj_setup
KHO: fix boot failure due to kmemleak access to non-PRESENT pages
Documentation/ABI: new kexec and kdump sysfs interface
Documentation/ABI: mark old kexec sysfs deprecated
kexec: move sysfs entries to /sys/kernel/kexec
test_kho: always print restore status
kho: free chunks using free_page() instead of kfree()
selftests/liveupdate: add kexec test for multiple and empty sessions
selftests/liveupdate: add simple kexec-based selftest for LUO
selftests/liveupdate: add userspace API selftests
docs: add documentation for memfd preservation via LUO
mm: memfd_luo: allow preserving memfd
liveupdate: luo_file: add private argument to store runtime state
mm: shmem: export some functions to internal.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Miscellaneous documentation fixes"
* tag 'x86-urgent-2025-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/Documentation: Prefix hexadecimal literals with 0x
x86/boot/Documentation: Spell 'ID' consistently
x86/platform: Fix and extend kernel-doc comments in <asm/x86_init.h>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"Address various objtool scalability bugs/inefficiencies exposed by
allmodconfig builds, plus improve the quality of alternatives
instructions generated code and disassembly"
* tag 'objtool-urgent-2025-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Simplify .annotate_insn code generation output some more
objtool: Add more robust signal error handling, detect and warn about stack overflows
objtool: Remove newlines and tabs from annotation macros
objtool: Consolidate annotation macros
x86/asm: Remove ANNOTATE_DATA_SPECIAL usage
x86/alternative: Remove ANNOTATE_DATA_SPECIAL usage
objtool: Fix stack overflow in validate_branch()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- More DMA mapping API refactoring to physical addresses as the primary
interface instead of page+offset parameters.
This time dma_map_ops callbacks are converted to physical addresses,
what in turn results also in some simplification of architecture
specific code (Leon Romanovsky and Jason Gunthorpe)
- Clarify that dma_map_benchmark is not a kernel self-test, but
standalone tool (Qinxin Xia)
* tag 'dma-mapping-6.19-2025-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: remove unused map_page callback
xen: swiotlb: Convert mapping routine to rely on physical address
x86: Use physical address for DMA mapping
sparc: Use physical address DMA mapping
powerpc: Convert to physical address DMA mapping
parisc: Convert DMA map_page to map_phys interface
MIPS/jazzdma: Provide physical address directly
alpha: Convert mapping routine to rely on physical address
dma-mapping: remove unused mapping resource callbacks
xen: swiotlb: Switch to physical address mapping callbacks
ARM: dma-mapping: Switch to physical address mapping callbacks
ARM: dma-mapping: Reduce struct page exposure in arch_sync_dma*()
dma-mapping: convert dummy ops to physical address mapping
dma-mapping: prepare dma_map_ops to conversion to physical address
tools/dma: move dma_map_benchmark from selftests to tools/dma
|
|
Pull bitmap updates from Yury Norov:
- Runtime field_{get,prep}() (Geert)
- Rust ID pool updates (Alice)
- min_t() simplification (David)
- __sw_hweightN kernel-doc fixes (Andy)
- cpumask.h headers cleanup (Andy)
* tag 'bitmap-for-6.19' of github.com:/norov/linux: (32 commits)
rust_binder: use bitmap for allocation of handles
rust: id_pool: do not immediately acquire new ids
rust: id_pool: do not supply starting capacity
rust: id_pool: rename IdPool::new() to with_capacity()
rust: bitmap: add BitmapVec::new_inline()
rust: bitmap: add MAX_LEN and MAX_INLINE_LEN constants
cpumask: Don't use "proxy" headers
soc: renesas: Use bitfield helpers
clk: renesas: Use bitfield helpers
ALSA: usb-audio: Convert to common field_{get,prep}() helpers
soc: renesas: rz-sysc: Convert to common field_get() helper
pinctrl: ma35: Convert to common field_{get,prep}() helpers
iio: mlx90614: Convert to common field_{get,prep}() helpers
iio: dac: Convert to common field_prep() helper
gpio: aspeed: Convert to common field_{get,prep}() helpers
EDAC/ie31200: Convert to common field_get() helper
crypto: qat - convert to common field_get() helper
clk: at91: Convert to common field_{get,prep}() helpers
bitfield: Add non-constant field_{prep,get}() helpers
bitfield: Add less-checking __FIELD_{GET,PREP}()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Arch Topology:
- Move parse_acpi_topology() from arm64 to common code for reuse in
RISC-V
CPU:
- Expose housekeeping CPUs through /sys/devices/system/cpu/housekeeping
- Print a newline (or 0x0A) instead of '(null)' reading
/sys/devices/system/cpu/nohz_full when nohz_full= is not set
debugfs
- Remove (broken) 'no-mount' mode
- Remove redundant access mode checks in debugfs_get_tree() and
debugfs_create_*() functions
Devres:
- Remove unused devm_free_percpu() helper
- Move devm_alloc_percpu() from device.h to devres.h
Firmware Loader:
- Replace simple_strtol() with kstrtoint()
- Do not call cancel_store() when no upload is in progress
kernfs:
- Increase struct super_block::maxbytes to MAX_LFS_FILESIZE
- Fix a missing unwind path in __kernfs_new_node()
Misc:
- Increase the name size in struct auxiliary_device_id to 40
characters
- Replace system_unbound_wq with system_dfl_wq and add WQ_PERCPU to
alloc_workqueue()
Platform:
- Replace ERR_PTR() with IOMEM_ERR_PTR() in platform ioremap
functions
Rust:
- Auxiliary:
- Unregister auxiliary device on parent device unbind
- Move parent() to impl Device; implement device context aware
parent() for Device<Bound>
- Illustrate how to safely obtain a driver's device private data
when calling from an auxiliary driver into the parant device
driver
- DebugFs:
- Implement support for binary large objects
- Device:
- Let probe() return the driver's device private data as pinned
initializer, i.e. impl PinInit<Self, Error>
- Implement safe accessor for a driver's device private data for
Device<Bound> (returned reference can't out-live driver binding
and guarantees the correct private data type)
- Implement AsBusDevice trait, to be used by class device
abstractions to derive the bus device type of the parent device
- DMA:
- Store raw pointer of allocation as NonNull
- Use start_ptr() and start_ptr_mut() to inherit correct
mutability of self
- FS:
- Add file::Offset type alias
- I2C:
- Add abstractions for I2C device / driver infrastructure
- Implement abstractions for manual I2C device registrations
- I/O:
- Use "kernel vertical" style for imports
- Define ResourceSize as resource_size_t
- Move ResourceSize to top-level I/O module
- Add type alias for phys_addr_t
- Implement Rust version of read_poll_timeout_atomic()
- PCI:
- Use "kernel vertical" style for imports
- Move I/O and IRQ infrastructure to separate files
- Add support for PCI interrupt vectors
- Implement TryInto<IrqRequest<'a>> for IrqVector<'a> to convert
an IrqVector bound to specific pci::Device into an IrqRequest
bound to the same pci::Device's parent Device
- Leverage pin_init_scope() to get rid of redundant Result in IRQ
methods
- PinInit:
- Add {pin_}init_scope() to execute code before creating an
initializer
- Platform:
- Leverage pin_init_scope() to get rid of redundant Result in IRQ
methods
- Timekeeping:
- Implement abstraction of udelay()
- Uaccess:
- Implement read_slice_partial() and read_slice_file() for
UserSliceReader
- Implement write_slice_partial() and write_slice_file() for
UserSliceWriter
sysfs:
- Prepare the constification of struct attribute"
* tag 'driver-core-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (75 commits)
rust: pci: fix build failure when CONFIG_PCI_MSI is disabled
debugfs: Fix default access mode config check
debugfs: Remove broken no-mount mode
debugfs: Remove redundant access mode checks
driver core: Check drivers_autoprobe for all added devices
driver core: WQ_PERCPU added to alloc_workqueue users
driver core: replace use of system_unbound_wq with system_dfl_wq
tick/nohz: Expose housekeeping CPUs in sysfs
tick/nohz: avoid showing '(null)' if nohz_full= not set
sysfs/cpu: Use DEVICE_ATTR_RO for nohz_full attribute
kernfs: fix memory leak of kernfs_iattrs in __kernfs_new_node
fs/kernfs: raise sb->maxbytes to MAX_LFS_FILESIZE
mod_devicetable: Bump auxiliary_device_id name size
sysfs: simplify attribute definition macros
samples/kobject: constify 'struct foo_attribute'
samples/kobject: add is_visible() callback to attribute group
sysfs: attribute_group: enable const variants of is_visible()
sysfs: introduce __SYSFS_FUNCTION_ALTERNATIVE()
sysfs: transparently handle const pointers in ATTRIBUTE_GROUPS()
sysfs: attribute_group: allow registration of const attribute
...
|
|
Most common macros are defined in asm.h, asmmacro.h and stackframe.h.
Adjust these macros for both 32BIT and 64BIT.
Add SETUP_TWINS (Setup Trampoline Windows) and SETUP_MODES (Setup CRMD/
PRMD/EUEN) which will be used later.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
32BIT platforms only have 32bit CSR/IOCSR registers, 64BIT platforms
have both 32bit/64bit CSR/IOCSR registers. Now there are both 32bit and
64bit CSR accessors:
csr_read32()/csr_write32()/csr_xchg32();
csr_read64()/csr_write64()/csr_xchg64();
Some CSR registers (address and timer registers) are 32bit length on
32BIT platform and 64bit length on 64BIT platform. To avoid #ifdefs here
and there, they need adaptive accessors, so we define and use:
csr_read()/csr_write()/csr_xchg();
IOCSR doesn't have a "natural length", which means a 64bit register can
be treated as two 32bit registers, so we just use two 32bit accessors to
emulate a 64bit accessors.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch64 has both AMO and LL/SC instructions, while LoongArch32 only
has LL/SC intstructions. So we add a Kconfig option CPU_HAS_AMO here and
implement atomic operations (also including local operations and percpu
operations) for both 32BIT and 64BIT platforms.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Loongson-2K3000 has a new PCI ID (0x7a46) for its display controller,
Add it for pci_fixup_vgadev() since we prefer a discrete graphics card
as default boot device if present.
Cc: stable@vger.kernel.org
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add and use some macros for AVEC interrupt controller, instead of using
magic numbers.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
For thread_count, the current calculation method has a maximum of 255,
which may not be sufficient in the future. Therefore, we are correcting
it now.
Reference: SMBIOS Specification, 7.5 Processor Information (Type 4)[1]
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.9.0.pdf
Cc: stable@vger.kernel.org
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
It is better to use unsigned long rather than long for _end and _text to
calculate the kernel length.
Cc: stable@vger.kernel.org # v6.3+
Fixes: e5f02b51fa0c ("LoongArch: Add support for kernel address space layout randomization (KASLR)")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
