| Age | Commit message (Collapse) | Author |
|---|
|
Since uic_command::cmd_active is used as a boolean variable, change its
type from 'int' into 'bool'. No functionality has been changed.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251014200118.3390839-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Some systems, e.g. Rock 4D, have a pluggable UFS module. Link startup
fails systematically on these systems. If no UFS module has been plugged
in, more than fourty lines are logged after the "link startup failed"
message. Avoid this by reducing link startup failure logging.
An intended side effect of this patch is that scsi_host_busy() is not
called before scsi_add_host() is called.
Commit 995412e23bb2 ("blk-mq: Replace tags->lock with SRCU for tag
iterators") introduced a regression - the warning shown below is
triggered during every boot. This patch fixes that regression.
Call trace:
__srcu_read_lock+0x30/0x80 (P)
blk_mq_tagset_busy_iter+0x44/0x300
scsi_host_busy+0x38/0x70
ufshcd_print_host_state+0x34/0x1bc
ufshcd_link_startup.constprop.0+0xe4/0x2e0
ufshcd_init+0x944/0xf80
ufshcd_pltfrm_init+0x504/0x820
ufs_rockchip_probe+0x2c/0x88
platform_probe+0x5c/0xa4
really_probe+0xc0/0x38c
__driver_probe_device+0x7c/0x150
driver_probe_device+0x40/0x120
__driver_attach+0xc8/0x1e0
bus_for_each_dev+0x7c/0xdc
driver_attach+0x24/0x30
bus_add_driver+0x110/0x230
driver_register+0x68/0x130
__platform_driver_register+0x20/0x2c
ufs_rockchip_pltform_init+0x1c/0x28
do_one_initcall+0x60/0x1e0
kernel_init_freeable+0x248/0x2c4
kernel_init+0x20/0x140
ret_from_fork+0x10/0x20
Reported-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Closes: https://lore.kernel.org/linux-block/pnezafputodmqlpumwfbn644ohjybouveehcjhz2hmhtcf2rka@sdhoiivync4y/
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251014200118.3390839-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufs_sysfs_add_nodes() is called concurrently with ufs_get_device_desc().
This may cause the following code to be called before
ufs_sysfs_add_nodes():
sysfs_update_group(&hba->dev->kobj, &ufs_sysfs_hid_group);
If this happens, ufs_sysfs_add_nodes() triggers a kernel warning and
fails. Fix this by calling ufs_sysfs_add_nodes() before SCSI LUNs are
scanned since the sysfs_update_group() call happens from the context of
thread that executes ufshcd_async_scan(). This patch fixes the following
kernel warning:
sysfs: cannot create duplicate filename '/devices/platform/3c2d0000.ufs/hid'
Workqueue: async async_run_entry_fn
Call trace:
dump_backtrace+0xfc/0x17c
show_stack+0x18/0x28
dump_stack_lvl+0x40/0x104
dump_stack+0x18/0x3c
sysfs_warn_dup+0x6c/0xc8
internal_create_group+0x1c8/0x504
sysfs_create_groups+0x38/0x9c
ufs_sysfs_add_nodes+0x20/0x58
ufshcd_init+0x1114/0x134c
ufshcd_pltfrm_init+0x728/0x7d8
ufs_google_probe+0x30/0x84
platform_probe+0xa0/0xe0
really_probe+0x114/0x454
__driver_probe_device+0xa4/0x160
driver_probe_device+0x44/0x23c
__device_attach_driver+0x15c/0x1f4
bus_for_each_drv+0x10c/0x168
__device_attach_async_helper+0x80/0xf8
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
ufshcd 3c2d0000.ufs: ufs_sysfs_add_nodes: sysfs groups creation failed (err = -17)
Cc: Daniel Lee <chullee@google.com>
Fixes: bb7663dec67b ("scsi: ufs: sysfs: Make HID attributes visible")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251014200118.3390839-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
According to UFS specifications, the power-off sequence for a UFS device
includes:
- Sending an SSU command with Power_Condition=3 and await a response.
- Asserting RST_N low.
- Turning off REF_CLK.
- Turning off VCC.
- Turning off VCCQ/VCCQ2.
As part of ufs shutdown, after the SSU command completion, asserting
hardware reset (HWRST) triggers the device firmware to wake up and
execute its reset routine. This routine initializes hardware blocks and
takes a few milliseconds to complete. During this time, the ICCQ draws a
large current.
This large ICCQ current may cause issues for the regulator which is
supplying power to UFS, because the turn off request from UFS driver to
the regulator framework will be immediately followed by low power
mode(LPM) request by regulator framework. This is done by framework
because UFS which is the only client is requesting for disable. So if
the rail is still in the process of shutting down while ICCQ exceeds LPM
current thresholds, and LPM mode is activated in hardware during this
state, it may trigger an overcurrent protection (OCP) fault in the
regulator.
To prevent this, a 10ms delay is added after asserting HWRST. This
allows the reset operation to complete while power rails remain active
and in high-power mode.
Currently there is no way for Host to query whether the reset is
completed or not and hence this the delay is based on experiments with
Qualcomm UFS controllers across multiple UFS vendors.
Signed-off-by: Nitin Rawat <nitin.rawat@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251012173828.9880-1-nitin.rawat@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Peter Wang <peter.wang@mediatek.com says>:
Improves the UFS Mediatek driver by correcting clock scaling with PM
QoS, and adjusting power management flows. It addresses
shutdown/suspend race conditions, and removes redundant
functions. Support for new platforms is added with the MMIO_OTSD_CTRL
register, and MT6991 performance is optimized with MRTT and random
improvements. These changes collectively enhance driver performance,
stability, and compatibility.
Changes since v1:
1. Remove two patches that will be fixed in UFS core.
- ufs: host: mediatek: Fix runtime suspend error deadlock
- ufs: host: mediatek: Enable interrupts for MCQ mode
2. Use hba->shutting_down instead of ufshcd_is_user_access_allowed
v1:
https://patch.msgid.link/20250918104000.208856-1-peter.wang@mediatek.com
Link: https://patch.msgid.link/20250924094527.2992256-1-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support for the MT6991 platform by enabling MRTT settings and random
performance improvements. These enhancements aim to optimize performance
and efficiency on the MT6991 hardware.
Enable multi-Round Trip Time (MRTT) for improved data handling. Enable
random performance improvement features to boost overall system
responsiveness.
Signed-off-by: Naomi Chu <naomi.chu@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-9-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Introduce support for a new UFS Mediatek platform by adding the
REG_UFS_UFS_MMIO_OTSD_CTRL register. This update includes checks for
legacy platforms and uses the new register to replace debug selection
and handle specific operations. The changes ensure compatibility across
different hardware versions and prevent potential issues with debug
usage on newer platforms.
Additional updates include error logging improvements during link setup
for newer and legacy platforms, ensuring proper event logging and
debugging.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-8-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove the duplicate ufs_mtk_us_to_ahit() function in the UFS Mediatek
driver and export the existing ufshcd_us_to_ahit() function for shared
use. This change reduces redundancy and maintains consistency across the
codebase.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-7-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Address a race condition between shutdown and suspend operations in the
UFS Mediatek driver. Before entering suspend, check if a shutdown is in
progress to prevent conflicts and ensure system stability.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-6-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Set the sync length for FASTAUTO G1 mode in the UFS Mediatek
driver. This ensures the sync length meets minimum values for high-speed
gears, improving stability during power mode changes.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-5-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add clock scaling down for power management flow in the UFS Mediatek
driver. If clock scaling is disabled and fixed in high gear, ensure the
clock scales down during suspend and scales up again after resume to
support high gear. This adjustment maintains proper power management.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-4-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Adjust clock scaling during suspend and resume in the UFS Mediatek
driver. Ensure that the clock scales down during suspend if it was
scaled up, and scales up again after resume. This adjustment maintains
proper power management.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-3-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Correct clock scaling with PM QoS during suspend and resume. Ensure PM
QoS is released during suspend if scaling up and re-applied after
resume. This prevents performance issues and maintains proper power
management.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-2-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Bao D. Nguyen <quic_nguyenb@quicinc.com> says:
Multiple ufs device manufacturers request support for the
UFS_DEVICE_QUIRK_DELAY_AFTER_LPM quirk in the Qualcomm's platform
driver. After checking further with the major UFS manufacturers
engineering teams such as Samsung, Kioxia, SK Hynix and Micron, all
the manufacturers require this quirk. Since the quirk is needed by all
the ufs device manufacturers, remove the quirk in the ufs core driver
and implement a universal delay for all the ufs devices.
In addition to verifying with the public device's datasheets, the ufs
device manufacturer's engineering teams confirmed the required vcc
power-off time for the devices is a minimum of 1ms before vcc can be
powered on again. The existing 5ms delay implemented in the ufs core
driver seems too conservative, so replace the hard coded 5ms delay
with a variable default to 2ms setting to improve the system resume
latency. The platform drivers can override this setting as needed.
Link: https://patch.msgid.link/cover.1760383740.git.quic_nguyenb@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After the UFS device VCC is powered off, all the UFS device
manufacturers require a minimum of 1ms of power-off time before VCC can
be powered on again. This requirement has been verified with all the UFS
device manufacturer's datasheets.
Replace the hard coded 5ms delay with a variable with a default setting
of 2ms to improve the system resume latency. The platform drivers can
override this setting as needed.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/72fa649406a0bf02271575b7d58f22c968aa5d7e.1760383740.git.quic_nguyenb@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After the UFS device VCC is turned off, all the UFS device manufacturers
require a period of power-off time before the VCC can be turned on
again. This requirement has been confirmed with all the UFS device
manufacturer's datasheets.
Remove the UFS_DEVICE_QUIRK_DELAY_AFTER_LPM quirk in the UFS core driver
and implement a universal delay that is required by all the UFS device
manufacturers. In addition, remove the support for this quirk in the
platform drivers.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/25f134d5a42e8b8365be64d512d1bb5fc2bce6ff.1760383740.git.quic_nguyenb@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Enhance the ufshcd_print_tr() function to support dumping completion
queue (CQ) entries in MCQ mode when an error occurs. This addition
provides more detailed debugging information by including the CQ entry
data in the error logs, aiding in the diagnosis of issues in MCQ mode.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251016023507.1000664-3-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update the completion queue (CQ) entry format according to the UFS 4.1
specification. UFS 4.1 introduces new members in reserved record
DW5. Also refine DW4 with detailed members defined in UFS 4.0. Modify
the code to incorporate these changes by updating the overall_status in
the CQ entry structure.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251016023507.1000664-2-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A value of an attribute will be initialized at ufshcd_dme_get_attr().
There is no need to initialize a tx_lanes.
Signed-off-by: Wonkon Kim <wkon.kim@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251020061539.28661-3-wkon.kim@samsung.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If ufshcd_send_cmd() fails, *mib_val may have a garbage value. It can
get an unintended value of an attribute.
Make ufshcd_dme_get_attr() always initialize *mib_val.
Fixes: 12b4fdb4f6bc ("[SCSI] ufs: add dme configuration primitives")
Signed-off-by: Wonkon Kim <wkon.kim@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251020061539.28661-2-wkon.kim@samsung.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix the issue where host_sem is not released due to a new return path in
commit f966e02ae521 ("scsi: ufs: core: Fix runtime suspend error
deadlock").
Check pm_op_in_progress before acquiring hba->host_sem to prevent
deadlocks and ensure proper resource management during error
handling. Add comment for use ufshcd_rpm_get_noresume() to safely
perform link recovery without interfering with ongoing PM operations.
Fixes: f966e02ae521 ("scsi: ufs: core: Fix runtime suspend error deadlock")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251008065651.1589614-2-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI fixes from James Bottomley:
"Fixes only in drivers (ufs, mvsas, qla2xxx, target) that came in just
before or during the merge window.
The most important one is the qla2xxx which reverts a conversion to
fix flexible array member warnings, that went up in this merge window
but which turned out on further testing to be causing data corruption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Include UTP error in INT_FATAL_ERRORS
scsi: ufs: sysfs: Make HID attributes visible
scsi: mvsas: Fix use-after-free bugs in mvs_work_queue
scsi: ufs: core: Fix PM QoS mutex initialization
scsi: ufs: core: Fix runtime suspend error deadlock
Revert "scsi: qla2xxx: Fix memcpy() field-spanning write issue"
scsi: target: target_core_configfs: Add length check to avoid buffer overflow
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, mpi3mr, lpfc, pm80xx, mpt3sas) plus
assorted cleanups and fixes.
The only core update is to sd.c and is mostly cosmetic"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (105 commits)
scsi: MAINTAINERS: Update FC element owners
scsi: mpt3sas: Update driver version to 54.100.00.00
scsi: mpt3sas: Add support for 22.5 Gbps SAS link rate
scsi: mpt3sas: Suppress unnecessary IOCLogInfo on CONFIG_INVALID_PAGE
scsi: mpt3sas: Fix crash in transport port remove by using ioc_info()
scsi: ufs: ufs-qcom: Add support for limiting HS gear and rate
scsi: ufs: pltfrm: Add DT support to limit HS gear and gear rate
scsi: ufs: ufs-qcom: Remove redundant re-assignment to hs_rate
scsi: ufs: dt-bindings: Document gear and rate limit properties
scsi: ufs: core: Fix data race in CPU latency PM QoS request handling
scsi: libfc: Fix potential buffer overflow in fc_ct_ms_fill()
scsi: storvsc: Remove redundant ternary operators
scsi: ufs: core: Change MCQ interrupt enable flow
scsi: smartpqi: Replace kmalloc() + copy_from_user() with memdup_user()
scsi: hpsa: Replace kmalloc() + copy_from_user() with memdup_user()
scsi: hpsa: Fix potential memory leak in hpsa_big_passthru_ioctl()
scsi: lpfc: Copyright updates for 14.4.0.11 patches
scsi: lpfc: Update lpfc version to 14.4.0.11
scsi: lpfc: Convert debugfs directory counts from atomic to unsigned int
scsi: lpfc: Clean up extraneous phba dentries
...
|
|
Call sysfs_update_group() after reading the device descriptor to ensure
the HID sysfs attributes are visible when the feature is supported.
Fixes: ae7795a8c258 ("scsi: ufs: core: Add HID support")
Signed-off-by: Daniel Lee <chullee@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
hba->pm_qos_mutex is used very early as a part of ufshcd_init(), so it
need to be initialized before that call. This fixes the following
warning:
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: kernel/locking/mutex.c:577 at __mutex_lock+0x268/0x894, CPU#4: kworker/u32:4/72
Modules linked in:
CPU: 4 UID: 0 PID: 72 Comm: kworker/u32:4 Not tainted 6.17.0-rc7-next-20250926+ #11223 PREEMPT
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __mutex_lock+0x268/0x894
lr : __mutex_lock+0x268/0x894
...
Call trace:
__mutex_lock+0x268/0x894 (P)
mutex_lock_nested+0x24/0x30
ufshcd_pm_qos_update+0x30/0x78
ufshcd_setup_clocks+0x2d4/0x3c4
ufshcd_init+0x234/0x126c
ufshcd_pltfrm_init+0x62c/0x82c
ufs_qcom_probe+0x20/0x58
platform_probe+0x5c/0xac
really_probe+0xbc/0x298
__driver_probe_device+0x78/0x12c
driver_probe_device+0x40/0x164
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x80/0xdc
__device_attach+0xa8/0x1b0
device_initial_probe+0x14/0x20
bus_probe_device+0xb0/0xb4
deferred_probe_work_func+0x8c/0xc8
process_one_work+0x208/0x60c
worker_thread+0x244/0x388
kthread+0x150/0x228
ret_from_fork+0x10/0x20
irq event stamp: 57267
hardirqs last enabled at (57267): [<ffffd761485e868c>] _raw_spin_unlock_irqrestore+0x74/0x78
hardirqs last disabled at (57266): [<ffffd76147b13c44>] clk_enable_lock+0x7c/0xf0
softirqs last enabled at (56270): [<ffffd7614734446c>] handle_softirqs+0x4c4/0x4dc
softirqs last disabled at (56265): [<ffffd76147290690>] __do_softirq+0x14/0x20
---[ end trace 0000000000000000 ]---
Fixes: 79dde5f7dc7c ("scsi: ufs: core: Fix data race in CPU latency PM QoS request handling")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Message-Id: <20250929112730.3782765-1-m.szyprowski@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Resolve the deadlock issue during runtime suspend when an error triggers
the error handler. Prevent the deadlock by checking pm_op_in_progress
and performing a quick recovery. This approach ensures that the error
handler does not wait indefinitely for runtime PM to resume, allowing
runtime suspend to proceed smoothly.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Message-Id: <20250926012940.3933367-1-peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Ram Kumar Dwivedi <quic_rdwivedi@quicinc.com> says:
This patch series adds support for limiting the maximum high-speed
gear and rate used by the UFS controller via device tree properties.
Some platforms may have signal integrity, clock configuration, or
layout issues that prevent reliable operation at higher gears or
rates. This is especially critical in automotive and other platforms
where stability is prioritized over peak performance.
The series follows this logical progression:
1. Document the new DT properties in the common UFS binding
2. Clean up existing redundant code in the qcom driver
3. Add platform-level parsing support for the new properties
4. Integrate the platform support in the qcom driver
This approach makes the functionality available to other UFS host
drivers and provides a cleaner, more maintainable implementation.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support to limit Tx/Rx gear and rate during UFS initialization based
on DT property.
Also update the phy_gear to ensure PHY calibrations align with the
required gear and rate.
Signed-off-by: Ram Kumar Dwivedi <quic_rdwivedi@quicinc.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Introduce parsing of 'limit-hs-gear' and 'limit-gear-rate' device tree
properties to restrict high-speed gear and rate during initialization.
This is useful in cases where the customer board may have signal
integrity, clock configuration or layout issues that prevent reliable
operation at higher gears. Such limitations are especially critical in
those platforms, where stability is prioritized over peak performance.
Co-developed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Ram Kumar Dwivedi <quic_rdwivedi@quicinc.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove the redundant else block that assigns PA_HS_MODE_B to hs_rate, as
it is already assigned in ufshcd_init_host_params(). This avoids
unnecessary reassignment and prevents overwriting hs_rate when it is
explicitly set to a different value.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Ram Kumar Dwivedi <quic_rdwivedi@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The cpu_latency_qos_add/remove/update_request interfaces lack internal
synchronization by design, requiring the caller to ensure thread safety.
The current implementation relies on the 'pm_qos_enabled' flag, which is
insufficient to prevent concurrent access and cannot serve as a proper
synchronization mechanism. This has led to data races and list
corruption issues.
A typical race condition call trace is:
[Thread A]
ufshcd_pm_qos_exit()
--> cpu_latency_qos_remove_request()
--> cpu_latency_qos_apply();
--> pm_qos_update_target()
--> plist_del <--(1) delete plist node
--> memset(req, 0, sizeof(*req));
--> hba->pm_qos_enabled = false;
[Thread B]
ufshcd_devfreq_target
--> ufshcd_devfreq_scale
--> ufshcd_scale_clks
--> ufshcd_pm_qos_update <--(2) pm_qos_enabled is true
--> cpu_latency_qos_update_request
--> pm_qos_update_target
--> plist_del <--(3) plist node use-after-free
Introduces a dedicated mutex to serialize PM QoS operations, preventing
data races and ensuring safe access to PM QoS resources, including sysfs
interface reads.
Fixes: 2777e73fc154 ("scsi: ufs: core: Add CPU latency QoS support for UFS driver")
Signed-off-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Huan Tang <tanghuan@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the MCQ interrupt enable process to
ufshcd_mcq_make_queues_operational() to ensure that interrupts are set
correctly when making queues operational, similar to
ufshcd_make_hba_operational(). This change addresses the issue where
ufshcd_mcq_make_queues_operational() was not fully operational due to
missing interrupt enablement.
This change only affects host drivers that call
ufshcd_mcq_make_queues_operational(), i.e. ufs-mediatek.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Some Kioxia UFS 4 devices do not support the qTimestamp attribute. Set
the UFS_DEVICE_QUIRK_NO_TIMESTAMP_SUPPORT for these devices such that no
error messages appear in the kernel log about failures to set the
qTimestamp attribute.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Tested-by: Nitin Rawat <quic_nitirawa@quicinc.com> # on SM8650-QRD
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Message-ID: <20250909190614.3531435-1-bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the UFS lane clocks remain enabled even after the link enters
the Hibern8 state and are only disabled during runtime/system
suspend.This patch modifies the behavior to disable the lane clocks
during ufs_qcom_setup_clocks(), which is invoked shortly after the link
enters Hibern8 via gate work.
While hibern8_notify() offers immediate control, toggling clocks on
every transition isn't ideal due to varied contexts like clock scaling.
Since setup_clocks() manages PHY/controller resources and is invoked
soon after Hibern8 entry, it serves as a central and stable point for
clock gating.
Signed-off-by: Palash Kambar <quic_pkambar@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Message-ID: <20250909055149.2068737-1-quic_pkambar@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix the comment for SYNC_LEN_G2 in exynos_ufs_config_sync_pattern_mask().
The actual value is 40us, not 44us, matching the configured mask timing.
This change improves code clarity and avoids potential confusion for
readers and maintainers.
No functional changes.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Message-ID: <20250907202752.3613183-1-alok.a.tiwari@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Nitin Rawat <nitin.rawat@oss.qualcomm.com> says:
The patch series simplifies the UFS MCQ (Multi Circular Queue)
resource mapping in the Qualcomm UFS host controller driver by
replacing the complex multi-resource approach with a streamlined
single-resource implementation.
The current MCQ implementation uses multiple separate resource
mappings (RES_UFS, RES_MCQ, RES_MCQ_SQD, RES_MCQ_VS) with dynamic
resource allocation, which increases code complexity and potential for
resource mapping errors. This approach also doesn't align with the
device tree binding specification that defines a single 'mcq' memory
region.
Replace the multi-resource mapping with a single "mcq" resource that
encompasses the entire MCQ configuration space. The doorbell registers
(SQD, CQD, SQIS, CQIS) are accessed using predefined offsets relative
to the MCQ base address, providing clearer memory layout organization.
Tested on Qualcomm platforms SM8650 and SM8750 with UFS MCQ enabled.
Changes from v3:
1. Addressed Krzysztof comment to separate device tree and driver
patch independently in different patch series. This series caters
driver changes.
2. Addressed Manivannan's change to update commit text and remove
redundant null check in mcq code.
3. Addressed Manivannan's to Update few offsets as fixed definition
instead of enum.
Changes from v2:
1. Removed dt-bindings patch as existing binding supports required
reg-names format.
2. Added patch to refactor MCQ register dump logic for new resource
mapping.
3. Added patch to remove unused ufshcd_res_info structure from UFS core.
4. Changed reg-names from "ufs_mem" to "std" in device tree patches.
5. Reordered patches with driver changes first, then device tree changes.
6. Updated SM8750 MCQ region size from 0x2000 to 0x15000
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Refactor MCQ register dump to align with the new resource mapping. As
part of refactor, below changes are done:
- Update ufs_qcom_dump_regs() function signature to accept direct
base address instead of resource ID enum
- Modify ufs_qcom_dump_mcq_hci_regs() to use hba->mcq_base and
calculated addresses from MCQ operation info
- Replace enum ufshcd_res with direct memory-mapped I/O addresses
Additionally remove the ufshcd_res_info structure and associated enum
ufshcd_res definitions from the UFS host controller header. These were
previously used for MCQ resource mapping but are no longer needed
following recent refactoring to use direct base addresses instead of
multiple separate resource regions.
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The current MCQ resource configuration involves multiple resource
mappings and dynamic resource allocation.
Simplify the resource mapping by directly mapping the single "mcq"
resource from device tree to hba->mcq_base instead of mapping multiple
separate resources (RES_UFS, RES_MCQ, RES_MCQ_SQD, RES_MCQ_VS).
It also uses predefined offsets for MCQ doorbell registers (SQD, CQD,
SQIS, CQIS) relative to the MCQ base,providing clearer memory layout
clarity.
Additionally update vendor-specific register offset UFS_MEM_CQIS_VS
offset from 0x8 to 0x4008 to align with the hardware programming guide.
The new approach assumes the device tree provides a single "mcq"
resource that encompasses the entire MCQ configuration space, making the
driver more maintainable and less prone to resource mapping errors.
The change aligns the driver implementation with the device tree binding
specification, which defines a single 'mcq' memory region rather than
multiple separate regions.
Co-developed-by: Ram Kumar Dwivedi <quic_rdwivedi@quicinc.com>
Signed-off-by: Ram Kumar Dwivedi <quic_rdwivedi@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
enhancements"
Peter Wang <peter.wang@mediatek.com> says:
These patches collectively enhance the UFS host driver's reliability,
power management efficiency, and error recovery mechanisms on MediaTek
platforms. They address critical issues and introduce optimizations
that improve system stability and performance.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Adjust the timing of device power control to ensure low power mode (LPM)
is entered only after VCC is turned off. Prevent VCCQ/VCCQ2 from
entering LPM prematurely, ensuring proper power management and device
stability.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Resolve the issue of unbalanced IRQ enablement by setting the
'is_mcq_intr_enabled' flag after the first successful IRQ enablement.
Ensure proper tracking of the IRQ state and prevent potential mismatches
in IRQ handling.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Address the issue where the host does not send adapt to the device after
PA_Init success. Ensure the adapt process is correctly initiated for
devices with IP version MT6899 and above, resolving communication issues
between the host and device.
Signed-off-by: Alice Chao <alice.chao@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Optimize the recovery flow by returning an error code immediately if a
wait idle timeout occurs, rather than waiting for the link to reach the
up state. Shorten the recovery process and improve error handling
efficiency when idle state transitions fail.
Signed-off-by: Sanjeev Y <sanjeev.y@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Disable auto-hibern8 during power mode transitions to prevent unintended
entry into auto-hibern8. Restore the original auto-hibern8 timer value
after completing the power mode change to maintain system stability and
prevent potential issues during power state transitions.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support for UFS PHY runtime power management by probing the PHY
device and enabling its runtime PM. Ensure the correct sequence of
operations during suspend and resume: PHY suspend -> UFS suspend -> UFS
resume -> PHY resume. Improve power management efficiency and system
stability with this enhancement.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Correct the system resume flow by turning MTCMOS on before setting LPM
to false. During system suspend, set LPM to true and turn MTCMOS
off. Ensure proper power management and system stability with the
updated resume sequence.
Signed-off-by: Alice Chao <alice.chao@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Refine the system power management (PM) flow by skipping low power mode
(LPM) and MTCMOS settings if runtime PM is already applied. Prevent
redundant operations to ensure a more efficient PM process.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Improve the recovery process for failed resume operations. Log the
device's power status and return 0 if both resume and recovery fail to
prevent I/O hang.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Improve the recovery process for hibernation exit failures. Trigger the
error handler and break the suspend operation to ensure effective
recovery from hibernation errors. Activate the error handling mechanism
by ufshcd_force_error_recovery and scheduling the error handler work.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Previous checks incorrectly tested the DMA addresses (dma_handle) for
NULL. Since dma_alloc_coherent() returns the CPU (virtual) address, the
NULL check should be performed on the *_base_addr pointer to correctly
detect allocation failures.
Update the checks to validate sqe_base_addr and cqe_base_addr instead of
sqe_dma_addr and cqe_dma_addr.
Fixes: 4682abfae2eb ("scsi: ufs: core: mcq: Allocate memory for MCQ mode")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
