| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a quirk for i8042 to better handle another TUXEDO model
- a quirk to atkbd to handle incorcet behavior of HONOR FMB-P internal
keyboard
- a definition for a new ABS_SND_PROFILE event
- fixes to alps and lkkbd drivers to reliably shut down pending work on
removal
- a fix to apple_z2 driver tightening input report parsing
- a fix for "off-by-one" error when validating config in ti_am335x_tsc
driver
- addition of CRKD Guitars device IDs to xpad driver.
* tag 'input-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ti_am335x_tsc - fix off-by-one error in wire_order validation
Input: xpad - add support for CRKD Guitars
Input: add ABS_SND_PROFILE
Input: apple_z2 - fix reading incorrect reports after exiting sleep
Input: alps - fix use-after-free bugs caused by dev3_register_work
Input: i8042 - add TUXEDO InfinityBook Max Gen10 AMD to i8042 quirk table
Input: atkbd - skip deactivate for HONOR FMB-P's internal keyboard
Input: lkkbd - disable pending work before freeing device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- bcm, pxa, rcar: fix void-pointer-to-enum-cast warning
- new hardware IDs / DT bindings for
- Intel Nova Lake-S
- Mobileye
- Qualcomm SM8750
* tag 'i2c-for-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: qcom-cci: Document SM8750 compatible
i2c: i801: Add support for Intel Nova Lake-S
dt-bindings: i2c: dw: Add Mobileye I2C controllers
i2c: rcar: Fix Wvoid-pointer-to-enum-cast warning
i2c: pxa: Fix Wvoid-pointer-to-enum-cast warning
i2c: bcm-iproc: Fix Wvoid-pointer-to-enum-cast warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix FPU core dumps on certain CPU models
- Fix htmldocs build warning
- Export TLB tracing event name via header
- Remove unused constant from <linux/mm_types.h>
- Fix comments
- Fix whitespace noise in documentation
- Fix variadic structure's definition to un-confuse UBSAN
- Fix posted MSI interrupts irq_retrigger() bug
- Fix asm build failure with older GCC builds
* tag 'x86-urgent-2025-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bug: Fix old GCC compile fails
x86/msi: Make irq_retrigger() functional for posted MSI
x86/platform/uv: Fix UBSAN array-index-out-of-bounds
mm: Remove tlb_flush_reason::NR_TLB_FLUSH_REASONS from <linux/mm_types.h>
x86/mm/tlb/trace: Export the TLB_REMOTE_WRONG_CPU enum in <trace/events/tlb.h>
x86/sgx: Remove unmatched quote in __sgx_encl_extend function comment
x86/boot/Documentation: Fix whitespace noise in boot.rst
x86/fpu: Fix FPU state core dump truncation on CPUs with no extended xfeatures
x86/boot/Documentation: Fix htmldocs build warning due to malformed table in boot.rst
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Damien Le Moal:
- Disable link power management (LPM) for a Seagate drive that is
misbehaving when LPM is enabled
* tag 'ata-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Disable LPM on ST2000DM008-2FR102
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes for various SPI drivers, plus a relaxation
of constraints in the DT for the DesignWare controller to reflect
hardware that's been seen.
There's several fixes for the Cadence QuadSPI driver since a fix
during the last release made some existing issues with error handling
during probe more readily visible"
* tag 'spi-fix-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: mt65xx: Use IRQF_ONESHOT with threaded IRQ
spi: dt-bindings: snps,dw-abp-ssi: Allow up to 16 chip-selects
spi: cadence-quadspi: Fix clock disable on probe failure path
spi: cadence-quadspi: Add error logging for DMA request failure
spi: fsl-cpm: Check length parity before switching to 16 bit mode
spi: mpfs: Fix an error handling path in mpfs_spi_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- ltc4282: Fix reset_history file permissions
- ds620: Update broken Datasheet URL in driver documentation
- tmp401: Fix overflow caused by default conversion rate value
- ibmpex: Fix use-after-free in high/low store
- dell-smm: Limit fan multiplier to avoid overflow
* tag 'hwmon-for-v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ltc4282): Fix reset_history file permissions
hwmon: (DS620) Update broken Datasheet URL in driver documentation
hwmon: (tmp401) fix overflow caused by default conversion rate value
hwmon: (ibmpex) fix use-after-free in high/low store
hwmon: (dell-smm) Limit fan multiplier to avoid overflow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- sdhci-esdhc-imx: Fix build problem dependency
- sdhci-of-arasan: Increase card-detect stable timeout to 2 seconds
- sdhci-of-aspeed: Fix DT doc for missing properties
* tag 'mmc-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-esdhc-imx: add alternate ARCH_S32 dependency to Kconfig
mmc: sdhci-of-arasan: Increase CD stable timeout to 2 seconds
dt-bindings: mmc: sdhci-of-aspeed: Switch ref to sdhci-common.yaml
|
|
Pull drm fixes from Dave Airlie:
"rc2 fixes for the week, mostly xe, with amdgpu as usual. Then a
smattering of small fixes across the core/tests/panel and amdxdna.
I expect things will be quiet for rc3/4 as teams take a break, and I'm
travelling but will keep an eye on things.
core:
- fix gem handle leak on DRM_IOCTL_GEM_CHANGE_HANDLE
tests:
- add EDEADLK handling
amdgpu:
- Fix no_console_suspend handling
- DCN 3.5.x seamless boot fixes
- DP audio fix
- Fix race in GPU recovery
- SMU 14 OD fix
amdkfd:
- Event fix
xe:
- Limit num_syncs to prevent oversized kernel allocations
- Disallow 0 OA property values
- Disallow 0 EU stall property values
- Fix kobject leak
- Workaround
- Loop variable reference fix
- Fix a CONFIG corner-case incorrect number of argument
- Skip reason prefix while emitting array
- VF migration fix
- Fix context in mei interrupt top half
- Don't include the CCS metadata in the dma-buf sg-table
- VF queueing recovery work fix
- Increase TDF timeout
- GT reset registers vs scheduler ordering fix
- Adjust long-running workload timeslices
- Always set OA_OAGLBCTXCTRL_COUNTER_RESUME
- Fix a return value
- Drop preempt-fences when destroying imported dma-bufs
- Use usleep_range for accurate long-running workload timeslicing
amdxdna:
- don't load virtualized
panel:
- fix visionox-rm69299 Kconfig dependency
- sony-td4353-jdi probing fix"
* tag 'drm-fixes-2025-12-20' of https://gitlab.freedesktop.org/drm/kernel: (34 commits)
drm/xe: Use usleep_range for accurate long-running workload timeslicing
drm/xe: Drop preempt-fences when destroying imported dma-bufs.
drm/xe/eustall: Disallow 0 EU stall property values
drm/xe/oa: Disallow 0 OA property values
drm/xe/xe_sriov_vfio: Fix return value in xe_sriov_vfio_migration_supported()
drm/xe/oa: Always set OAG_OAGLBCTXCTRL_COUNTER_RESUME
drm/xe: Adjust long-running workload timeslices to reasonable values
drm/xe/oa: Limit num_syncs to prevent oversized allocations
drm/xe: Limit num_syncs to prevent oversized allocations
drm/amdkfd: Fix improper NULL termination of queue restore SMI event string
drm/amd/pm: restore SCLK settings after S0ix resume
drm/amdgpu: fix a job->pasid access race in gpu recovery
drm/amd/display: Fix DP no audio issue
drm/amd/display: Fix scratch registers offsets for DCN351
drm/amd/display: Fix scratch registers offsets for DCN35
drm/amd: Resume the device in thaw() callback when console suspend is disabled
drm/panel: visionox-rm69299: Depend on BACKLIGHT_CLASS_DEVICE
accel/amdxdna: Block running under a hypervisor
drm/panel: sony-td4353-jdi: Enable prepare_prev_first
drm/xe: Restore engine registers before restarting schedulers after GT reset
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix warnings for Mediatek overlays not getting applied
- Fix regression in handling elfcorehdr region
- Fix creating cpufreq device on OPPv1 platforms
- Add GE7800 GPU in Renesas R-Car V3U
- Simplify dma-coherent property in TI display bindings
- Allow "reg" in sprd,sc9860-clk binding
- Update Linus Walleij's email
* tag 'devicetree-fixes-for-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
arm64: dts: mediatek: Apply mt8395-radxa DT overlay at build time
arm64: dts: mediatek: mt7988: add dtbs with applied overlays for bpi-r4 (pro)
arm64: dts: mediatek: mt7986: add dtbs with applied overlays for bpi-r3
dt-bindings: Updates Linus Walleij's mail address
dt-bindings: gpu: img,powervr-rogue: Document GE7800 GPU in Renesas R-Car V3U
cpufreq: dt-platdev: Fix creating device on OPPv1 platforms
dt-bindings: clock: sprd,sc9860-clk: Allow "reg" for gate clocks
dt-bindings: display/ti: Simplify dma-coherent property
arm64: kdump: Fix elfcorehdr overlap caused by reserved memory processing reorder
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Two left-over updates that could not go into -rc1 due to conflicts
with other series:
- Simplify checks in arch_kfence_init_pool() since
force_pte_mapping() already takes BBML2-noabort (break-before-make
Level 2 with no aborts generated) into account
- Remove unneeded SVE/SME fallback preserve/store handling in the
arm64 EFI. With the recent updates, the fallback path is only taken
for EFI runtime calls from hardirq or NMI contexts. In practice,
this only happens under panic/oops/emergency_restart() and no
restoring of the user state expected.
There's a corresponding lkdtm update to trigger a BUG() or panic()
from hardirq context together with a fixup not to confuse
clang/objtool about the control flow
GCS (guarded control stacks) fix: flush the GCS locking state on exec,
otherwise the new task will not be able to enable GCS (locked as
disabled)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
lkdtm/bugs: Do not confuse the clang/objtool with busy wait loop
arm64/gcs: Flush the GCS locking state on exec
arm64/efi: Remove unneeded SVE/SME fallback preserve/store handling
lkdtm/bugs: Add cases for BUG and PANIC occurring in hardirq context
arm64: mm: Simplify check in arch_kfence_init_pool()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- iommupt: Fix an oops found by syzcaller in the new generic
IO-page-table code.
- AMD-Vi: Fix IO_PAGE_FAULTs in kdump kernels triggered by re-using
domain-ids from previous kernel.
* tag 'iommu-fixes-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
amd/iommu: Make protection domain ID functions non-static
amd/iommu: Preserve domain ids inside the kdump kernel
iommupt: Return ERR_PTR from _table_alloc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- ublk selftests for missing coverage
- two fixes for the block integrity code
- fix for the newly added newly added PR read keys ioctl, limiting the
memory that can be allocated
- work around for a deadlock that can occur with ublk, where partition
scanning ends up recursing back into file closure, which needs the
same mutex grabbed. Not the prettiest thing in the world, but an
acceptable work-around until we can eliminate the reliance on
disk->open_mutex for this
- fix for a race between enabling writeback throttling and new IO
submissions
- move a bit of bio flag handling code. No changes, but needed for a
patchset for a future kernel
- fix for an init time id leak failure in rnbd
- loop/zloop state check fix
* tag 'block-6.19-20251218' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: validate interval_exp integrity limit
block: validate pi_offset integrity limit
block: rnbd-clt: Fix leaked ID in init_dev()
ublk: fix deadlock when reading partition table
block: add allocation size check in blkdev_pr_read_keys()
Documentation: admin-guide: blockdev: replace zone_capacity with zone_capacity_mb when creating devices
zloop: use READ_ONCE() to read lo->lo_state in queue_rq path
loop: use READ_ONCE() to read lo->lo_state without locking
block: fix race between wbt_enable_default and IO submission
selftests: ublk: add user copy test cases
selftests: ublk: add support for user copy to kublk
selftests: ublk: forbid multiple data copy modes
selftests: ublk: don't share backing files between ublk servers
selftests: ublk: use auto_zc for PER_IO_DAEMON tests in stress_04
selftests: ublk: fix fio arguments in run_io_and_recover()
selftests: ublk: remove unused ios map in seq_io.bt
selftests: ublk: correct last_rw map type in seq_io.bt
selftests: ublk: fix overflow in ublk_queue_auto_zc_fallback()
block: move around bio flagging helpers
|
|
The reset_history attributes are write only. Hence don't report them as
readable just to return -EOPNOTSUPP later on.
Fixes: cbc29538dbf7 ("hwmon: Add driver for LTC4282")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20251219-ltc4282-fix-reset-history-v1-1-8eab974c124b@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Since commit eb972eab0794 ("lkdtm/bugs: Add cases for BUG and PANIC
occurring in hardirq context"), building with clang for x86_64 results
in the following warnings:
vmlinux.o: warning: objtool: lkdtm_PANIC_IN_HARDIRQ(): unexpected end of section .text.lkdtm_PANIC_IN_HARDIRQ
vmlinux.o: warning: objtool: lkdtm_BUG_IN_HARDIRQ(): unexpected end of section .text.lkdtm_BUG_IN_HARDIRQ
caused by busy "while (wait_for_...);" loops. Add READ_ONCE() and
cpu_relax() to better indicate the intention and avoid any unwanted
compiler optimisations.
Fixes: eb972eab0794 ("lkdtm/bugs: Add cases for BUG and PANIC occurring in hardirq context")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512190111.jxFSqxUH-lkp@intel.com/
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
So that both iommu.c and init.c can utilize them. Also define a new
function 'pdom_id_destroy()' to destroy 'pdom_ids' instead of directly
calling ida functions.
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Currently AMD IOMMU driver does not reserve domain ids programmed in the
DTE while reusing the device table inside kdump kernel. This can cause
reallocation of these domain ids for newer domains that are created by
the kdump kernel, which can lead to potential IO_PAGE_FAULTs
Hence reserve these ids inside pdom_ids.
Fixes: 38e5f33ee359 ("iommu/amd: Reuse device table for kdump")
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The current validation 'wire_order[i] > ARRAY_SIZE(config_pins)' allows
wire_order[i] to equal ARRAY_SIZE(config_pins), which causes out-of-bounds
access when used as index in 'config_pins[wire_order[i]]'.
Since config_pins has 4 elements (indices 0-3), the valid range for
wire_order should be 0-3. Fix the off-by-one error by using >= instead
of > in the validation check.
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Link: https://patch.msgid.link/20251114062817.852698-1-junjie.cao@intel.com
Fixes: bb76dc09ddfc ("input: ti_am33x_tsc: Order of TSC wires, made configurable")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add support for various CRKD Guitar Controllers.
Signed-off-by: Sanjay Govind <sanjay.govind9@gmail.com>
Link: https://patch.msgid.link/20251129073720.2750-2-sanjay.govind9@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
ABS_SND_PROFILE used to describe the state of a multi-value sound profile
switch. This will be used for the alert-slider on OnePlus phones or other
phones.
Profile values added as SND_PROFLE_(SILENT|VIBRATE|RING) identifiers
to input-event-codes.h so they can be used from DTS.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Guido Günther <agx@sigxcpu.org> # oneplus,fajita & oneplus,enchilada
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Link: https://patch.msgid.link/20251113-op6-tri-state-v8-1-54073f3874bc@ixit.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- Limit num_syncs to prevent oversized kernel allocations (Shuicheng)
- Disallow 0 OA property values (Ashutosh)
- Disallow 0 EU stall property values (Ashutosh)
Driver Changes:
- Fix kobject leak (Shuicheng)
- Workaround (Vinay)
- Loop variable reference fix (Matt Brost)
- Fix a CONFIG corner-case incorrect number of arguments (Arnd Bergmann)
- Skip reason prefix while emitting array (Raag)
- VF migration fix (Tomasz)
- Fix context in mei interrupt top half (Junxiao)
- Don't include the CCS metadata in the dma-buf sg-table (Thomas)
- VF queueing recovery work fix (Satyanarayana)
- Increase TDF timeout (Jagmeet)
- GT reset registers vs scheduler ordering fix (Jan)
- Adjust long-running workload timeslices (Matt Brost)
- Always set OA_OAGLBCTXCTRL_COUNTER_RESUME (Ashutosh)
- Fix a return value (Dan Carpenter)
- Drop preempt-fences when destroying imported dma-bufs (Thomas)
- Use usleep_range for accurate long-running workload timeslicing (Matthew)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aUSMlQ4iruzm0NQR@fedora
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc2:
- Add -EDEADLK handling in drm unit tests.
- Plug DRM_IOCTL_GEM_CHANGE_HANDLE leak.
- Fix regression in sony-td4353-jdi.
- Kconfig fix for visionox-rm69299.
- Do not load amdxdna when running virtualized.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/21861d1b-54bf-4853-9c35-97abe3c5deba@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These add a missing PCC check for guaranteed_perf in the ACPI CPPC
library and fix a static local variable access race condition in
acpi_pcc_address_space_setup() (Pengjie Zhang)"
* tag 'acpi-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PCC: Fix race condition by removing static qualifier
ACPI: CPPC: Fix missing PCC check for guaranteed_perf
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three issues in the power capping code including one recent
regression and a runtime PM framework regression introduced during the
6.17 development cycle:
- Fix CPU hotplug locking deadlock reported by lockdep after a recent
update of the Intel RAPL power capping driver (Srinivas Pandruvada)
- Fix sscanf() error return value handling in the power capping core
and a race condition in register_control_type() (Sumeet Pawnikar)
- Fix a concurrent bit field update issue in the runtime PM core code
by only updating the bit field in question when runtime PM is
disabled (Rafael Wysocki)"
* tag 'pm-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl: Fix possible recursive lock warning
PM: runtime: Do not clear needs_force_resume with enabled runtime PM
powercap: fix sscanf() error return value handling
powercap: fix race condition in register_control_type()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These enable a new hardware feature in the int340x thermal driver and
fix up comments in the thermal core code:
- Set a feature flag in the int340x thermal driver to enable the
power slider interface for Wildcat Lake processors (Srinivas
Pandruvada)
- Fix typo and indentation in comments in the thermal core (Thorsten
Blum)"
* tag 'thermal-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Fix typo and indentation in comments
thermal: intel: int340x: Enable power slider interface for Wildcat Lake
|
|
Under certain conditions (more prevalent after a suspend/resume cycle),
the touchscreen controller can send the "boot complete" interrupt before
it actually finished booting. In those cases, attempting to read touch
data resuls in a stream of "not ready" messages being read and
interpreted as a touch report. Check that the response is in fact a
touch report and discard it otherwise.
Reported-by: pitust <piotr@stelmaszek.com>
Closes: https://oftc.catirclogs.org/asahi/2025-12-17#34878715;
Fixes: 471a92f8a21a ("Input: apple_z2 - add a driver for Apple Z2 touchscreens")
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://patch.msgid.link/20251218-z2-init-fix-v1-1-48e3aa239caf@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"A few minor fixes, other than the randconfig fix this is only relevant
to test code, not releases:
- Randconfig failure if CONFIG_DMA_SHARED_BUFFER is not set
- Remove gcc warning in kselftest
- Fix a refcount leak on an error path in the selftest support code
- Fix missing overflow checks in the selftest support code"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Check for overflow in IOMMU_TEST_OP_ADD_RESERVED
iommufd/selftest: Do not leak the hwpt if IOMMU_TEST_OP_MD_CHECK_MAP fails
iommufd/selftest: Make it clearer to gcc that the access is not out of bounds
iommufd: Fix building without dmabuf
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and CAN.
Current release - regressions:
- netfilter: nf_conncount: fix leaked ct in error paths
- sched: act_mirred: fix loop detection
- sctp: fix potential deadlock in sctp_clone_sock()
- can: fix build dependency
- eth: mlx5e: do not update BQL of old txqs during channel
reconfiguration
Previous releases - regressions:
- sched: ets: always remove class from active list before deleting it
- inet: frags: flush pending skbs in fqdir_pre_exit()
- netfilter: nf_nat: remove bogus direction check
- mptcp:
- schedule rtx timer only after pushing data
- avoid deadlock on fallback while reinjecting
- can: gs_usb: fix error handling
- eth:
- mlx5e:
- avoid unregistering PSP twice
- fix double unregister of HCA_PORTS component
- bnxt_en: fix XDP_TX path
- mlxsw: fix use-after-free when updating multicast route stats
Previous releases - always broken:
- ethtool: avoid overflowing userspace buffer on stats query
- openvswitch: fix middle attribute validation in push_nsh() action
- eth:
- mlx5: fw_tracer, validate format string parameters
- mlxsw: spectrum_router: fix neighbour use-after-free
- ipvlan: ignore PACKET_LOOPBACK in handle_mode_l2()
Misc:
- Jozsef Kadlecsik retires from maintaining netfilter
- tools: ynl: fix build on systems with old kernel headers"
* tag 'net-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: hns3: add VLAN id validation before using
net: hns3: using the num_tqps to check whether tqp_index is out of range when vf get ring info from mbx
net: hns3: using the num_tqps in the vf driver to apply for resources
net: enetc: do not transmit redirected XDP frames when the link is down
selftests/tc-testing: Test case exercising potential mirred redirect deadlock
net/sched: act_mirred: fix loop detection
sctp: Clear inet_opt in sctp_v6_copy_ip_options().
sctp: Fetch inet6_sk() after setting ->pinet6 in sctp_clone_sock().
net/handshake: duplicate handshake cancellations leak socket
net/mlx5e: Don't include PSP in the hard MTU calculations
net/mlx5e: Do not update BQL of old txqs during channel reconfiguration
net/mlx5e: Trigger neighbor resolution for unresolved destinations
net/mlx5e: Use ip6_dst_lookup instead of ipv6_dst_lookup_flow for MAC init
net/mlx5: Serialize firmware reset with devlink
net/mlx5: fw_tracer, Handle escaped percent properly
net/mlx5: fw_tracer, Validate format string parameters
net/mlx5: Drain firmware reset in shutdown callback
net/mlx5: fw reset, clear reset requested on drain_fw_reset
net: dsa: mxl-gsw1xx: manually clear RANEG bit
net: dsa: mxl-gsw1xx: fix .shutdown driver operation
...
|
|
Merge power capping fixes for 6.19-rc2:
- Fix CPU hotplug locking deadlock reported by lockdep after a recent
update of the Intel RAPL power capping driver (Srinivas Pandruvada)
- Fix sscanf() error return value handling in the power capping core
and a race condition in register_control_type() (Sumeet Pawnikar)
* pm-powercap:
powercap: intel_rapl: Fix possible recursive lock warning
powercap: fix sscanf() error return value handling
powercap: fix race condition in register_control_type()
|
|
msleep is not very accurate in terms of how long it actually sleeps,
whereas usleep_range is precise. Replace the timeslice sleep for
long-running workloads with the more accurate usleep_range to avoid
jitter if the sleep period is less than 20ms.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251212182847.1683222-3-matthew.brost@intel.com
(cherry picked from commit ca415c4d4c17ad676a2c8981e1fcc432221dce79)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
When imported dma-bufs are destroyed, TTM is not fully
individualizing the dma-resv, but it *is* copying the fences that
need to be waited for before declaring idle. So in the case where
the bo->resv != bo->_resv we can still drop the preempt-fences, but
make sure we do that on bo->_resv which contains the fence-pointer
copy.
In the case where the copying fails, bo->_resv will typically not
contain any fences pointers at all, so there will be nothing to
drop. In that case, TTM would have ensured all fences that would
have been copied are signaled, including any remaining preempt
fences.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Fixes: fa0af721bd1f ("drm/ttm: test private resv obj on release/destroy")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.16+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Tested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251217093441.5073-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 425fe550fb513b567bd6d01f397d274092a9c274)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
An EU stall property value of 0 is invalid and will cause a NPD.
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6453
Fixes: 1537ec85ebd7 ("drm/xe/uapi: Introduce API for EU stall sampling")
Cc: stable@vger.kernel.org
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patch.msgid.link/20251212061850.1565459-4-ashutosh.dixit@intel.com
(cherry picked from commit 5bf763e908bf795da4ad538d21c1ec41f8021f76)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
An OA property value of 0 is invalid and will cause a NPD.
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6452
Fixes: cc4e6994d5a2 ("drm/xe/oa: Move functions up so they can be reused for config ioctl")
Cc: stable@vger.kernel.org
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patch.msgid.link/20251212061850.1565459-3-ashutosh.dixit@intel.com
(cherry picked from commit 7a100e6ddcc47c1f6ba7a19402de86ce24790621)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The xe_sriov_vfio_migration_supported() function is type bool so
returning -EPERM means returning true. Return false instead.
Fixes: bd45d46ffc8f ("drm/xe/pf: Export helpers for VFIO")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/aTLEZ4g-FD-iMQ2V@stanley.mountain
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 0a2404c8f6a3a120f79c57ef8a3302c8e8bc34d9)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Reports can be written out to the OA buffer using ways other than periodic
sampling. These include mmio trigger and context switches. To support these
use cases, when periodic sampling is not enabled,
OAG_OAGLBCTXCTRL_COUNTER_RESUME must be set.
Fixes: 1db9a9dc90ae ("drm/xe/oa: OA stream initialization (OAG)")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20251205212613.826224-4-ashutosh.dixit@intel.com
(cherry picked from commit 88d98e74adf3e20f678bb89581a5c3149fdbdeaa)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
A 10ms timeslice for long-running workloads is far too long and causes
significant jitter in benchmarks when the system is shared. Adjust the
value to 5ms for preempt-fencing VMs, as the resume step there is quite
costly as memory is moved around, and set it to zero for pagefault VMs,
since switching back to pagefault mode after dma-fence mode is
relatively fast.
Also change min_run_period_ms to 'unsiged int' type rather than 's64' as
only positive values make sense.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251212182847.1683222-2-matthew.brost@intel.com
(cherry picked from commit 33a5abd9a68394aa67f9618b20eee65ee8702ff4)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The OA open parameters did not validate num_syncs, allowing
userspace to pass arbitrarily large values, potentially
leading to excessive allocations.
Add check to ensure that num_syncs does not exceed DRM_XE_MAX_SYNCS,
returning -EINVAL when the limit is violated.
v2: use XE_IOCTL_DBG() and drop duplicated check. (Ashutosh)
Fixes: c8507a25cebd ("drm/xe/oa/uapi: Define and parse OA sync properties")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251205234715.2476561-6-shuicheng.lin@intel.com
(cherry picked from commit e057b2d2b8d815df3858a87dffafa2af37e5945b)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The exec and vm_bind ioctl allow userspace to specify an arbitrary
num_syncs value. Without bounds checking, a very large num_syncs
can force an excessively large allocation, leading to kernel warnings
from the page allocator as below.
Introduce DRM_XE_MAX_SYNCS (set to 1024) and reject any request
exceeding this limit.
"
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1217 at mm/page_alloc.c:5124 __alloc_frozen_pages_noprof+0x2f8/0x2180 mm/page_alloc.c:5124
...
Call Trace:
<TASK>
alloc_pages_mpol+0xe4/0x330 mm/mempolicy.c:2416
___kmalloc_large_node+0xd8/0x110 mm/slub.c:4317
__kmalloc_large_node_noprof+0x18/0xe0 mm/slub.c:4348
__do_kmalloc_node mm/slub.c:4364 [inline]
__kmalloc_noprof+0x3d4/0x4b0 mm/slub.c:4388
kmalloc_noprof include/linux/slab.h:909 [inline]
kmalloc_array_noprof include/linux/slab.h:948 [inline]
xe_exec_ioctl+0xa47/0x1e70 drivers/gpu/drm/xe/xe_exec.c:158
drm_ioctl_kernel+0x1f1/0x3e0 drivers/gpu/drm/drm_ioctl.c:797
drm_ioctl+0x5e7/0xc50 drivers/gpu/drm/drm_ioctl.c:894
xe_drm_ioctl+0x10b/0x170 drivers/gpu/drm/xe/xe_device.c:224
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:598 [inline]
__se_sys_ioctl fs/ioctl.c:584 [inline]
__x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:584
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xbb/0x380 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
"
v2: Add "Reported-by" and Cc stable kernels.
v3: Change XE_MAX_SYNCS from 64 to 1024. (Matt & Ashutosh)
v4: s/XE_MAX_SYNCS/DRM_XE_MAX_SYNCS/ (Matt)
v5: Do the check at the top of the exec func. (Matt)
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reported-by: Koen Koning <koen.koning@intel.com>
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6450
Cc: <stable@vger.kernel.org> # v6.12+
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Ivan Briano <ivan.briano@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251205234715.2476561-5-shuicheng.lin@intel.com
(cherry picked from commit b07bac9bd708ec468cd1b8a5fe70ae2ac9b0a11c)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-12-18
this is a pull request of 3 patches for net/main.
Tetsuo Handa contributes 2 patches to fix race windows in the j1939
protocol to properly handle disappearing network devices.
The last patch is by me, it fixes a build dependency with the CAN
drivers, that got introduced while fixing a dependency between the CAN
protocol and CAN device code.
linux-can-fixes-for-6.19-20251218
* tag 'linux-can-fixes-for-6.19-20251218' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: fix build dependency
can: j1939: make j1939_sk_bind() fail if device is no longer registered
can: j1939: make j1939_session_activate() fail if device is no longer registered
====================
Link: https://patch.msgid.link/20251218123132.664533-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the VLAN id may be used without validation when
receive a VLAN configuration mailbox from VF. The length of
vlan_del_fail_bmap is BITS_TO_LONGS(VLAN_N_VID). It may cause
out-of-bounds memory access once the VLAN id is bigger than
or equal to VLAN_N_VID.
Therefore, VLAN id needs to be checked to ensure it is within
the range of VLAN_N_VID.
Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251211023737.2327018-4-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
when vf get ring info from mbx
Currently, rss_size = num_tqps / tc_num. If tc_num is 1, then num_tqps
equals rss_size. However, if the tc_num is greater than 1, then rss_size
will be less than num_tqps, causing the tqp_index check for subsequent TCs
using rss_size to always fail.
This patch uses the num_tqps to check whether tqp_index is out of range,
instead of rss_size.
Fixes: 326334aad024 ("net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx()")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251211023737.2327018-3-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, hdev->htqp is allocated using hdev->num_tqps, and kinfo->tqp
is allocated using kinfo->num_tqps. However, kinfo->num_tqps is set to
min(new_tqps, hdev->num_tqps); Therefore, kinfo->num_tqps may be smaller
than hdev->num_tqps, which causes some hdev->htqp[i] to remain
uninitialized in hclgevf_knic_setup().
Thus, this patch allocates hdev->htqp and kinfo->tqp using hdev->num_tqps,
ensuring that the lengths of hdev->htqp and kinfo->tqp are consistent
and that all elements are properly initialized.
Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251211023737.2327018-2-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In the current implementation, the enetc_xdp_xmit() always transmits
redirected XDP frames even if the link is down, but the frames cannot
be transmitted from TX BD rings when the link is down, so the frames
are still kept in the TX BD rings. If the XDP program is uninstalled,
users will see the following warning logs.
fsl_enetc 0000:00:00.0 eno0: timeout for tx ring #6 clear
More worse, the TX BD ring cannot work properly anymore, because the
HW PIR and CIR are not equal after the re-initialization of the TX
BD ring. At this point, the BDs between CIR and PIR are invalid,
which will cause a hardware malfunction.
Another reason is that there is internal context in the ring prefetch
logic that will retain the state from the first incarnation of the ring
and continue prefetching from the stale location when we re-initialize
the ring. The internal context is only reset by an FLR. That is to say,
for LS1028A ENETC, software cannot set the HW CIR and PIR when
initializing the TX BD ring.
It does not make sense to transmit redirected XDP frames when the link is
down. Add a link status check to prevent transmission in this condition.
This fixes part of the issue, but more complex cases remain. For example,
the TX BD ring may still contain unsent frames when the link goes down.
Those situations require additional patches, which will build on this
one.
Fixes: 9d2b68cc108d ("net: enetc: add support for XDP_REDIRECT")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251211020919.121113-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If kstrdup() fails in init_dev(), then the newly allocated ID is lost.
Fixes: 64e8a6ece1a5 ("block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit [1] added the 40 bytes required by the PSP header+trailer and the
UDP header to MLX5E_ETH_HARD_MTU, which limits the device-wide max
software MTU that could be set. This is not okay, because most packets
are not PSP packets and it doesn't make sense to always reserve space
for headers which won't get added in most cases.
As it turns out, for TCP connections, PSP overhead is already taken into
account in the TCP MSS calculations via inet_csk(sk)->icsk_ext_hdr_len.
This was added in commit [2]. This means that the extra space reserved
in the hard MTU for mlx5 ends up unused and wasted.
Remove the unnecessary 40 byte reservation from hard MTU.
[1] commit e5a1861a298e ("net/mlx5e: Implement PSP Tx data path")
[2] commit e97269257fe4 ("net: psp: update the TCP MSS to reflect PSP
packet overhead")
Fixes: e5a1861a298e ("net/mlx5e: Implement PSP Tx data path")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1765284977-1363052-10-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
During channel reconfiguration (e.g., ethtool private flags changes),
the driver can trigger a kernel BUG_ON in dql_completed() with the error
"kernel BUG at lib/dynamic_queue_limits.c:99".
The issue occurs in the following sequence:
During mlx5e_safe_switch_params(), old channels are deactivated via
mlx5e_deactivate_txqsq(). New channels are created and activated, taking
ownership of the netdev_queues and their BQL state.
When old channels are closed via mlx5e_close_txqsq(), there may be
pending TX descriptors (sq->cc != sq->pc) that were in-flight during the
deactivation.
mlx5e_free_txqsq_descs() frees these pending descriptors and attempts to
complete them via netdev_tx_completed_queue().
However, the BQL state (dql->num_queued and dql->num_completed) have
been reset in mlx5e_activate_txqsq and belong to the new queue owner,
leading to dql->num_queued - dql->num_completed < nbytes.
This triggers BUG_ON(count > num_queued - num_completed) in
dql_completed().
Fixes: 3b88a535a8e1 ("net/mlx5e: Defer channels closure to reduce interface down time")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: William Tu <witu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://patch.msgid.link/1765284977-1363052-9-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When initializing the MAC addresses for an outbound IPsec packet offload
rule in mlx5e_ipsec_init_macs, the call to dst_neigh_lookup is used to
find the next-hop neighbor (typically the gateway in tunnel mode).
This call might create a new neighbor entry if one doesn't already
exist. This newly created entry starts in the INCOMPLETE state, as the
kernel hasn't yet sent an ARP or NDISC probe to resolve the MAC
address. In this case, neigh_ha_snapshot will correctly return an
all-zero MAC address.
IPsec packet offload requires the actual next-hop MAC address to
program the rule correctly. If the neighbor state is INCOMPLETE when
the rule is created, the hardware rule is programmed with an all-zero
destination MAC address. Packets sent using this rule will be
subsequently dropped by the receiving network infrastructure or host.
This patch adds a check specifically for the outbound offload path. If
neigh_ha_snapshot returns an all-zero MAC address, it proactively
calls neigh_event_send(n, NULL). This ensures the kernel immediately
sends the initial ARP or NDISC probe if one isn't already pending,
accelerating the resolution process. This helps prevent the hardware
rule from being programmed with an invalid MAC address and avoids
packet drops due to unresolved neighbors.
Fixes: 71670f766b8f ("net/mlx5e: Support routed networks during IPsec MACs initialization")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1765284977-1363052-8-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Replace ipv6_stub->ipv6_dst_lookup_flow() with ip6_dst_lookup() in
mlx5e_ipsec_init_macs() since IPsec transformations are not needed
during Security Association setup - only basic routing information is
required for nexthop MAC address resolution.
This resolves an issue where XfrmOutNoStates error counter would be
incremented when xfrm policy is configured before xfrm state, as the
IPsec-aware routing function would attempt policy checks during SA
initialization.
Fixes: 71670f766b8f ("net/mlx5e: Support routed networks during IPsec MACs initialization")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1765284977-1363052-7-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The firmware reset mechanism can be triggered by asynchronous events,
which may race with other devlink operations like devlink reload or
devlink dev eswitch set, potentially leading to inconsistent states.
This patch addresses the race by using the devl_lock to serialize the
firmware reset against other devlink operations. When a reset is
requested, the driver attempts to acquire the lock. If successful, it
sets a flag to block devlink reload or eswitch changes, ACKs the reset
to firmware and then releases the lock. If the lock is already held by
another operation, the driver NACKs the firmware reset request,
indicating that the reset cannot proceed.
Firmware reset does not keep the devl_lock and instead uses an internal
firmware reset bit. This is because firmware resets can be triggered by
asynchronous events, and processed in different threads. It is illegal
and unsafe to acquire a lock in one thread and attempt to release it in
another, as lock ownership is intrinsically thread-specific.
This change ensures that firmware resets and other devlink operations
are mutually exclusive during the critical reset request phase,
preventing race conditions.
Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mateusz Berezecki <mberezecki@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1765284977-1363052-6-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The firmware tracer's format string validation and parameter counting
did not properly handle escaped percent signs (%%). This caused
fw_tracer to count more parameters when trace format strings contained
literal percent characters.
To fix it, allow %% to pass string validation and skip %% sequences when
counting parameters since they represent literal percent signs rather
than format specifiers.
Fixes: 70dd6fdb8987 ("net/mlx5: FW tracer, parse traces and kernel tracing support")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reported-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Closes: https://lore.kernel.org/netdev/hanz6rzrb2bqbplryjrakvkbmv4y5jlmtthnvi3thg5slqvelp@t3s3erottr6s/
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1765284977-1363052-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add validation for format string parameters in the firmware tracer to
prevent potential security vulnerabilities and crashes from malformed
format strings received from firmware.
The firmware tracer receives format strings from the device firmware and
uses them to format trace messages. Without proper validation, bad
firmware could provide format strings with invalid format specifiers
(e.g., %s, %p, %n) that could lead to crashes, or other undefined
behavior.
Add mlx5_tracer_validate_params() to validate that all format specifiers
in trace strings are limited to safe integer/hex formats (%x, %d, %i,
%u, %llx, %lx, etc.). Reject strings containing other format types that
could be used to access arbitrary memory or cause crashes.
Invalid format strings are added to the trace output for visibility with
"BAD_FORMAT: " prefix.
Fixes: 70dd6fdb8987 ("net/mlx5: FW tracer, parse traces and kernel tracing support")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reported-by: Breno Leitao <leitao@debian.org>
Closes: https://lore.kernel.org/netdev/hanz6rzrb2bqbplryjrakvkbmv4y5jlmtthnvi3thg5slqvelp@t3s3erottr6s/
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1765284977-1363052-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
