* init.cfg (sanitizer_build_): Add a helper to detect if a program
is built against a sanitizer.
* tests/df/no-mtab-status-masked-proc.sh: Skip if a sanitizer build.
* tests/df/no-mtab-status-masked-proc.sh: A new test similar
to no-mtab-status.sh but should work with static builds.
* tests/local.mk: Reference the new test.
https://github.com/coreutils/coreutils/pull/156
It was seen that gnulib's read_file_system_list may use fopen instead
of open. Adjust the df(1) tests to replace both library functions.
* tests/df/no-mtab-status.sh: Change the shared library code invoked
via LD_PRELOAD to override both fopen and open. While at it, perform
varargs processing only when path is not "/proc/self/mountinfo".
* tests/df/skip-duplicates.sh: Likewise.
Two df(1) tests were skipped (since commit ee367bd38dac), because
the build of the shared library in those tests failed.
+ gcc -Wall -shared --std=gnu99 -fPIC -O2 k.c -o k.so -ldl
k.c: In function 'open':
k.c:37:7: error: implicit declaration of function 'streq'; did you \
mean 'strsep'? [-Wimplicit-function-declaration]
37 | if (streq (path, "/proc/self/mountinfo"))
| ^~~~~
| strsep
Gnulib streq is not available in the tests.
* tests/df/no-mtab-status.sh: Replace "streq" by "0==strcmp" in the
shared library source.
* tests/df/skip-duplicates.sh: Likewise.
Use new Gnulib streq function instead of rolling our own macro.
* bootstrap.conf (gnulib_modules): Add stringeq.
* src/rm.c (main): Don’t assume streq is a macro that expands to (...),
as it is now a function.
* src/system.h:
* tests/df/no-mtab-status.sh, tests/df/skip-duplicates.sh:
(STREQ): Remove. All uses replaced by streq.
* tests/df/skip-duplicates.sh: Just skip this test if we fail
to build the shared lib. This fails on Solaris 11 at least
due to no HAVE_MNTENT_H. Note HAVE_SYS_MNTENT_H does not
suffice for this wrapper code.
* tests/df/no-mtab-status.sh: Likewise.
Update to latest gnulib with new copyright year.
Run "make update-copyright" and then...
* gnulib: Update included in this commit as copyright years
are the only change from the previous gnulib commit.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Where rpl_fopen() is used rather than fopen(),
wrapping fopen() is ineffective.
Note rpl_fopen() is used as of glibc-2.39 at least
(due to fflush and fclose being replaced).
* tests/df/no-mtab-status.sh: Wrap open() rather than fopen().
* tests/df/skip-duplicates.sh: Likewise.
The test writes to the disk and means the space used changes. If this
crosses a number boundary, the heading spacing can change:
-Filesystem 1024-blocks Used Available Capacity Mounted on
+Filesystem 1024-blocks Used Available Capacity Mounted on
* tests/df/df-P.sh: Squash spaces with tr to avoid alignment variations.
* tests/df/problematic-chars.sh: Rely on gnulib setting
this to "none" where not usable.
* tests/misc/sleep.sh: Likewise.
* tests/printf/printf-mb.sh: Likewise.
* tests/printf/printf-quote.sh: Likewise.
* tests/sort/sort-debug-keys.sh: Likewise.
Update to latest gnulib with new copyright year.
Run "make update-copyright" and then...
* gnulib: Update included in this commit as copyright years
are the only change from the previous gnulib commit.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Manually update copyright year,
until we fully sync with gnulib at a later stage.
* tests/sample-test: Adjust to use the single most recent year.
Most of this just affects commentary and documentations. The only
significant behavior change is translating author names via
proper_name_lite rather than proper_name_utf8, or not translating
them at all. proper_name_lite is good enough for coreutils and
avoids the bloat that had coreutils not using Gnulib proper_name.
* bootstrap.conf (gnulib_modules): Use propername-lite instead
of propername.
(XGETTEXT_OPTIONS): Look for proper_name_lite instead of for
proper_name_utf8.
* cfg.mk (local-checks-to-skip): Remove
sc_proper_name_utf8_requires_ICONV, since we no longer use
proper_name_utf8.
(old_NEWS_hash): Update.
(sc_check-I18N-AUTHORS): Remove; no longer needed.
Update to latest gnulib with new copyright year.
Run "make update-copyright" and then...
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Manually update copyright year,
until we fully sync with gnulib at a later stage.
* tests/sample-test: Adjust to use the single most recent year.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
In documentation and comments, don’t assume that secondary storage
devices are disk devices. Similarly, don’t assume that main memory
uses magnetic cores, which became obsolete in the 1970s.
* src/du.c (usage):
* src/ls.c (usage):
* src/shred.c (usage): Reword to avoid “disk” in usage messages.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
* src/df.c (replace_problematic_chars): A new wrapper to be
more conservative in our replacement when not connected to a tty.
* tests/df/problematic-chars.sh: Add a test case.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
* src/df.c (main): stat() before open(), and avoid
the optional open when given a fifo argument.
* tests/df/unreadable.sh: Add a test case.
* NEWS: Mention the fix.
Fixes https://bugs.gnu.org/29038
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
* init.cfg (dump_mount_list_): A new function to output the
system mount list.
* tests/df/df-symlink.sh: Call dump_mount_list_ upon failure.
* tests/df/over-mount-device.sh: Likewise.
* tests/df/problematic-chars.sh: Likewise.
* tests/df/skip-rootfs.sh: Likewise.
* tests/df/total-verify.sh: Likewise.
* tests/df/unreadable.sh: Likewise.
* tests/df/df-symlink.sh: Only check the symmetry of
the source <-> target lookup, when the source is only mounted once,
which isn't the case if '.' is a BTRFS subvolume for example.
Reported by Assaf Gordon on a default OpenSUSE 42.1 install.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Quote file names using the "shell-escape" or "shell-escape-always"
methods, which quote as appropriate for most shells,
and better support copy and paste of presented names.
The "always" variant is used when the file name is
embedded in an error message with surrounding spaces.
* cfg.mk (sc_error_shell_quotes): A new syntax check rule
to suggest quotef() where appropriate.
(sc_error_shell_always_quotes): Likewise for quoteaf().
* src/system.h (quotef): A new define to apply shell quoting
when needed. I.E. when shell character or ':' is present.
(quoteaf): Likewise, but always quote.
* src/*.c: Use quotef() and quoteaf() rather than quote()
where appropriate.
* tests/: Adjust accordingly.
The LD_PRELOAD checks by -fsanitize=address are overly strict:
https://groups.google.com/forum/#!topic/address-sanitizer/jEvOJgkDqQk
A workaround is to first export LD_PRELOAD=libasan.so.2
The tests below are adjusted so that workaround is not discarded.
* tests/cp/no-ctx.sh: Append to $LD_PRELOAD.
* tests/df/no-mtab-status.sh: Likewise.
* tests/df/skip-duplicates.sh: Likewise.
* tests/ls/getxattr-speedup.sh: Likewise.
* tests/rm/r-root.sh: Likewise.
* tests/cp/nfs-removal-race.sh: Likewise. Also check that
LD_PRELOAD is effective to aid future maintainability
and avoid false failure if libasan.so.2 is not preloaded.
* tests/cp/no-ctx.sh: Scope of `var=val func` is inconsistent
across shells, so avoid that construct with functions.
* tests/df/no-mtab-status.sh: Likewise.
* tests/tail-2/inotify-race.sh: `read` needs an argument.
* tests/tail-2/inotify-race2.sh: Likewise.
* tests/df/no-mtab-status.sh: getmntent is no longer called
when /proc/self/mountinfo is present, thus causing the test
to be skipped. Therefore wrap fopen() to ignore mountinfo,
and use the test genmntent table instead.
* tests/df/skip-duplicates.sh: Likewise.
* tests/fs/skip-duplicates.sh: On this platform .mnt_opts is significant
so define to empty to avoid a NULL deref in read_file_system_list().
Fixes http://bugs.gnu.org/20210
Many tests use `program ... && fail=1` to ensure expected
error situations are indicated. However that would mask
an unexpected exit (like a crash). Therefore explicitly
check the expected exit code.
Note where error messages are also verified, the extra
protection is not added.
* tests/init.sh (returns_): A new helper function to
check the return code of a command, and used
throughout the tests.
* cfg.mk (sc_prohibit_and_fail_1): Add a syntax check
to avoid new instances of this issue.
* tests/df/no-mtab-status.sh: Provide libmount placeholders,
to avoid skipping the test when libmount is in use.
* tests/df/skip-duplicates.sh: Likewise.
* tests/df/skip-rootfs.sh: Comment that the test is moot
when libmount (/proc/self/mountinfo) is being used.
Run "make update-copyright" and then...
* tests/sample-test: Adjust to use the single most recent year.
* tests/du/bind-mount-dir-cycle-v2.sh: Fix case in copyright message,
so that year is updated automatically in future.
Included in this are gnulib changes 3ea43e02 2768ceb7
which make the device IDs from /proc/self/mountinfo
available to df. This can be leveraged by a subsequent
change to df to present a more accurate list of file systems.
* bootstrap: Merge from gnulib.
* src/ls.c (dev_ino_pop): s/obstack_blank/obstack_blank_fast/
as this API/ABI has changed, giving memory exhausted errors
if negative (large positive) numbers are passed to obstack_blank().
* tests/df/skip-duplicates.sh: Adjust as the new gnulib code
requires a non NULL mnt_opts even when mnt_type is not "none".
* src/df.c (filter_mount_list): Separate remote locations are
generally explicitly mounted, so list each even if they share
the same remote device and thus storage. However with --total
keep the suppression to give a more accurate value for the
total storage available.
(usage): Expand on the new implications of --total and move
it in the options list according to alphabetic order.
doc/coreutils.texi (df invocation): Mention that --total impacts
on deduplication of remote file systems and also move location
according to alphabetic order.
* tests/df/skip-duplicates.sh: Add remote test cases.
* NEWS: Mention the change in behavior.
Reported in http://bugs.debian.org/737399
Reported in http://bugzilla.redhat.com/920806
Reported in http://bugzilla.opensuse.org/866010
Reported in http://bugzilla.opensuse.org/901905
* src/df.c (last_device_for_mount): A new function to identify
the last device mounted for a mount point.
(get_disk): Use the above to discard mount entries for a device,
where a later mount entry uses a different device name than
that of the user specified device.
* tests/df/over-mount-device.sh: A new root test.
* tests/local.mk: Reference the new test.
* NEWS: Reword for all these related recent fixes.
Discussed at: http://bugs.gnu.org/16539#69
A system provided mount entry may be unavailable due to TOCTOU race,
or if another device has been over-mounted at that position, or due to
access permissions. In all these cases output "-" placeholder values
rather than either producing an error, or in the over-mount case
outputting values for the wrong device.
* src/df.c (device_list): A new global list now updated by
filter_mount_list().
(filter_mount_list): Adjust to take a parameter as to whether
update the global mount list, or only the mount <-> device ID mapping.
(get_dev): Use the device ID mapping to ensure we're not outputting
stats for the wrong device. Also output placeholder values when we
can't access a system specified mount point.
(get_all_entries): Set the DEVICE_ONLY param for filter_mount_list().
(devname_for_dev): A new function to search the mount <-> dev mapping.
* test/df/skip-duplicates.sh: Adjust accordingly.
* NEWS: Mention the bug fixes.
Discussed at: http://bugs.gnu.org/16539
