Update to latest gnulib with new copyright year.
Run "make update-copyright" and then...
* gnulib: Update included in this commit as copyright years
are the only change from the previous gnulib commit.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Update to latest gnulib with new copyright year.
Run "make update-copyright" and then...
* gnulib: Update included in this commit as copyright years
are the only change from the previous gnulib commit.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Manually update copyright year,
until we fully sync with gnulib at a later stage.
* tests/sample-test: Adjust to use the single most recent year.
Update to latest gnulib with new copyright year.
Run "make update-copyright" and then...
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Manually update copyright year,
until we fully sync with gnulib at a later stage.
* tests/sample-test: Adjust to use the single most recent year.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
With these adjustments, all tests pass on macOS Catalina.
* tests/dd/sparse.sh: Adjust so that systems like apfs that
don't create holes < 16 MiB do not fail erroneously.
* tests/touch/trailing-slash.sh: Darwin was seen to dereference
symlinks to files when given a trailing slash, so avoid
that particular case.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
programs may not be built due to missing system dependencies,
or any program can be excluded at configure time with
--enable-no-install-program. So ensure we're not testing the
system versions in these cases.
* init.cfg (print_ver_): Call require_built_ first.
* tests/misc/tty-eof.pl: Skip programs not built.
* tests/Coreutils.pm (run_tests): Likewise.
* tests/misc/ls-misc.pl: Use 'env test' rather than abs path.
* tests/misc/test-diag.pl: Likewise.
* tests/local.mk: Adjust include order for dependencies.
* tests/misc/arch.sh: Remove redundant calls to require_built_.
* tests/misc/chroot-fail.sh: Likewise.
* tests/misc/groups-dash.sh: Likewise.
* tests/misc/groups-version.sh: Likewise.
* tests/misc/stdbuf.sh: Likewise.
* tests/cp/acl.sh: Remove problematic call to print_ver_ [gs]etfacl.
* tests/mv/acl.sh: Likewise.
* cfg.mk (sc_env_test_dependencies): A new syntax check to enforce
specifying dependencies with print_ver_ for programs
specified through the env command.
* du/bigtime.sh: Add new print_ver_ dependencies.
* du/max-depth.sh: Likewise.
* dd/ascii.sh: Likewise.
* tests/ls/capability.sh: Likewise.
* tests/ls/root-rel-symlink-color.sh: Likewise.
* tests/misc/chroot-fail.sh: Likewise.
* tests/misc/readlink-fp-loop.sh: Likewise.
* tests/misc/sort-debug-keys.sh: Likewise.
* tests/readlink/can-e.sh: Likewise.
* tests/readlink/can-f.sh: Likewise.
* tests/readlink/can-m.sh: Likewise.
* tests/tail-2/inotify-race.sh: Likewise.
* tests/tail-2/inotify-race2.sh: Likewise.
* tests/touch/no-create-missing.sh: Likewise.
* tests/touch/no-dereference.sh: Likewise.
* tests/misc/printenv.sh: Tweak to avoid syntax check trigger.
* tests/misc/help-version.sh: Likewise.
* tests/misc/yes.sh: Likewise.
* tests/misc/printf-quote.sh: Use previously unused $prog.
* configure.ac (EXTRA_MANS): Add $gl_no_install_prog to the list
so that check-x-vs-1 syntax check is satisfied.
When some program produces unexpected output, that use of
compare-vs-/dev/null will ensure that the surprising output is
printed in the test's output. With "test -s err" only, one
would have to instrument and rerun in order to see the offending
output.
* cfg.mk (sc_prohibit_and_fail_1): Exempt 'compare' from this check.
* tests/dd/misc.sh: Change "tests -s ... || fail=1" to
"compare /dev/null ... && fail=1".
* tests/misc/nice.sh: Likewise.
* tests/rm/read-only.sh: Likewise.
* tests/tail-2/inotify-race.sh: Likewise.
* tests/touch/no-dereference.sh: Likewise.
Suggested by Jim Meyering in
http://lists.gnu.org/archive/html/coreutils/2015-01/msg00042.html
Many tests use `program ... && fail=1` to ensure expected
error situations are indicated. However that would mask
an unexpected exit (like a crash). Therefore explicitly
check the expected exit code.
Note where error messages are also verified, the extra
protection is not added.
* tests/init.sh (returns_): A new helper function to
check the return code of a command, and used
throughout the tests.
* cfg.mk (sc_prohibit_and_fail_1): Add a syntax check
to avoid new instances of this issue.
Run "make update-copyright" and then...
* tests/sample-test: Adjust to use the single most recent year.
* tests/du/bind-mount-dir-cycle-v2.sh: Fix case in copyright message,
so that year is updated automatically in future.
Since commit v8.22-94-g99960ee, chroot(1) skips the chroot(2) syscall
for "/" arguments (and synonyms). The problem is that it also skips
the following chdir("/") call in that case. The latter breaks existing
scripts which expect "/" to be the working directory inside the chroot.
While the first part of the change - i.e., skipping chroot("/") - is
okay for consistency with systems where it might succeed for a non-root
user, the second part might be malicious, e.g.
cd /home/user && chroot '/' bin/foo
In the "best" case, chroot(1) could not execute 'bin/foo' with ENOENT,
but in the worst case, chroot(1) would execute '/home/user/bin/foo' in
the case that exists - instead of '/bin/foo'.
Revert that second part of the patch, i.e., perform the chdir("/)
in the common case again - unless the new --skip-chdir option is
specified. Restrict this new option to the case of "/" arguments.
* src/chroot.c (SKIP_CHDIR): Add enum.
(long_opts): Add entry for the new --skip-chdir option.
(usage): Add --skip-chdir option, and while at it, move the other
to options into alphabetical order.
(main): Accept the above new option, allowing it only in the case
when NEWROOT is the old "/".
Move down the chdir() call after the if-clause to ensure it is
run in any case - unless --skip-chdir is specified.
Add a 'newroot' variable for the new root directory as it is used
in a couple of places now.
* tests/misc/chroot-fail.sh: Invert the last tests which check the
working directory of the execvp()ed program when a "/"-like
argument was passed: now expect it to be "/" - unless --skip-chdir
is given.
* doc/coreutils.texi (chroot invocation): Document the new option.
Document that chroot(1) usually calls chdir("/") unless the new
--skip-chdir option is specified. Sort options.
* NEWS (Changes in behavior): Mention the fix.
(New features): Mention the new option.
* init.cfg (nonroot_has_perm_): Add chroot's new --skip-chdir option.
* tests/cp/preserve-gid.sh (t1): Likewise.
* tests/cp/special-bits.sh: Likewise.
* tests/id/setgid.sh: Likewise.
* tests/misc/truncate-owned-by-other.sh: Likewise.
* tests/mv/sticky-to-xpart.sh: Likewise.
* tests/rm/fail-2eperm.sh: Likewise.
* tests/rm/no-give-up.sh: Likewise.
* tests/touch/now-owned-by-other.sh: Likewise.
Reported by Andreas Schwab in http://bugs.gnu.org/18062
This works for any program that might also be a shell built-in.
It is more concise. In addition, it makes output more reproducible:
some diagnostics include argv[0], which will now be just the program
name, rather than the full absolute name of the executable.
* tests/misc/sort-compress.sh: Use env kill, rather than absolute name.
* tests/install/trap.sh: Likewise.
* tests/misc/timeout.sh: Likewise.
* tests/touch/no-dereference.sh: Do the same for two uses of "test".
* tests/touch/no-create-missing.sh: Likewise.
* HACKING: GID is more useful in tests than group name, so rename
input param from NON_ROOT_GROUP to NON_ROOT_GID to make it obvious
that only a group ID is now acceptable, thus allowing GID lookups
to be avoided throughout the tests.
* init.cfg (require_root_): Likewise.
* tests/misc/truncate-owned-by-other.sh: Avoid looking up the GID.
* tests/touch/now-owned-by-other.sh: Likewise.
* tests/misc/chroot-credentials.sh: Likewise. Also fix an instance
of comparison against NON_ROOT_GROUP which would have given a false
failure if a non numeric value was passed in.
* tests/id/setgid.sh: Use previously looked up gid as a more
accurate base for the subsequent adjustment, and move
the uid lookup within chroot, rather than having the overhead
of a separate `id` invocation.
On most shells `:>file || framework_failure_` will not evaluate
the framework_failure_ even if there was an error writing the file.
shells which do evaluate the failure are ksh 93u+ and bash 4.2,
while shells wich don't include bash 4.3, solaris, freebsd, dash.
Furthermore this construct is problematic on Solaris 10 sh,
which will try to optimize away a `:' command in a loop
after the first iteration, even if it is redirected.
* tests/cp/link-deref.sh: Remove the leading colon on redirections.
* tests/cp/reflink-perm.sh: Likewise.
* tests/id/zero.sh: Likewise.
* tests/install/install-C.sh: Likewise.
* tests/misc/env.sh: Likewise.
* tests/misc/md5sum-bsd.sh: Likewise.
* tests/misc/runcon-no-reorder.sh: Likewise.
* tests/mv/partition-perm.sh: Likewise.
* tests/rm/r-root.sh: Likewise.
* tests/split/l-chunk.sh: Likewise.
* tests/split/line-bytes.sh: Likewise.
* tests/tail-2/inotify-rotate.sh: Likewise.
* tests/tail-2/retry.sh: Likewise.
* tests/tail-2/symlink.sh: Likewise.
* tests/tail-2/wait.sh: Likewise.
* tests/touch/read-only.sh: Likewise.
+ cfg.mk (sc_prohibit_colon_redirection): A new syntax check
to avoid further instances of this creeping in.
Run "make update-copyright", but then also run this,
perl -pi -e 's/2\d\d\d-//' tests/sample-test
to make that one script use the single most recent year number.
Run "make update-copyright", but then also run this,
perl -pi -e 's/2\d\d\d-//' tests/sample-test
to make that one script use the single most recent year number.
* Makefile.am (SUBDIRS): Remove 'tests'.
(include): The '$(top_srcdir)/tests/local.mk' file.
(check-root): Remove this convenience target, it's no longer needed
now that the "real" check-root target once in 'tests/Makefile' will
land in the top-level makefile.
* configure.ac (AC_CONFIG_FILES): Remove 'tests/Makefile'.
* tests/Makefile.am: Rename ...
* tests/local.mk: ... like this, with a lot of adjustments.
* tests/init.cfg: Move ...
* init.cfg: ... here. This is necessary, for a limitation of the
gnulib-provided 'tests/init.sh', which unconditionally look for
'init.cfg' in the $(srcdir) directory.
* tests/*/*.sh: Adjust: expect init.sh to be in '$srcdir/tests',
not in '$srcdir', and extend $PATH with './src', not with '../src'.
* tests/Coreutils.pm: Adjust similarly.
* tests/pr/pr-tests.pl ($pfx): Likewise.
Not only this shrinks the size of the generated Makefile (from > 6300
lines to ~3000), but will allow further simplifications in future
changes.
* tests/Makefile.am (TEST_EXTENSIONS): Add '.sh' and '.pl'.
(PL_LOG_COMPILER, SH_LOG_COMPILER): New, still defined simply to
$(LOG_COMPILER) for the time being.
(TESTS, root_tests): Adjust as described.
* All tests: Rename as described.
Exempt init.sh because it runs before we're assured to have a
shell that groks $(...). Exempt *.mk because "$" would have to
be doubled, and besides, any `...` expression in a .mk file is
almost certainly evaluated before init.sh is run. Finally, also
exempt the perl-based tests, because perl's `...` cannot be
converted to $(...). Do that by running this command:
git grep -l '`.*`' tests \
| grep -Ev 'init\.sh|\.mk$' | xargs grep -Lw perl \
| xargs perl -pi -e 's/`(.*?)`/\$($1)/g'
One minor fix-up change was required after that, due to how
quoting differs:
diff --git a/tests/chmod/equals b/tests/chmod/equals
- expected_perms=$(eval 'echo \$expected_'$dest)
+ expected_perms=$(eval 'echo $expected_'$dest)
Another was to make these required quoting adjustments:
diff --git a/tests/misc/stty b/tests/misc/stty
...
- rev=$(eval echo "\\\$REV_$opt")
+ rev=$(eval echo "\$REV_$opt")
...
- rev1=$(eval echo "\\\$REV_$opt1")
- rev2=$(eval echo "\\\$REV_$opt2")
+ rev1=$(eval echo "\$REV_$opt1")
+ rev2=$(eval echo "\$REV_$opt2")
Also, transform two files that were needlessly excluded above:
(both use perl, but are mostly bourne shell)
perl -pi -e 's/`(.*?)`/\$($1)/g' \
tests/du/long-from-unreadable tests/init.cfg
Exempt lines with '$' or '=', since those are prone to improper
conversion. Run this:
git grep -l "\`[^']*'" tests \
|xargs perl -pi -e '/[=\$]/ and next;s/\`([^'\''"]*?'\'')/'\''$1/g'
These changes were mostly mechanical, made by running the
following command:
git grep -lw framework_failure | grep -v ChangeLog \
| xargs perl -pi -e 's/\b(framework_failure)\b/${1}_/'
and then editing init.cfg and `tests/cp/cp-a-selinux' by hand.
* tests/init.cfg (framework_failure): Remove, `framework_failure_'
from init.sh should be used instead in the tests.
Remove now-obsolete "FIXME" comment.
(is_local_dir_, require_strace_, require_membership_in_two_groups_,
require_sparse_support_, skip_if_mcstransd_is_running_,
mkfifo_or_skip_) Use `framework_failure_', not `framework_failure'.
* Many test scripts: Likewise.
* tests/init.cfg (skip_test_): Remove function.
Use skip_ in place of skip_test_ everywhere else.
* cfg.mk (sc_prohibit_skip_): Remove rule.
* tests/**: Use skip_, not skip_test_, everywhere.
Those were useful when tests might have been run in the same
directory and in parallel. Now, each test is run in a newly-
created empty directory.
* tests/cp/backup-1: Remove obsolete uses of "$$".
* tests/cp/same-file: Likewise.
* tests/dd/misc: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/mv/to-symlink: Likewise.
* tests/touch/fail-diag: Likewise.
Initially, I did this,
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e '~180-byte script'
but that line would have been much longer than the maximum permitted
by coreutils' commit hook, and wasn't readable besides, so here's a
more readable version:
lhs=$(printf '%s\\n' \
'if test "$VERBOSE" = yes; then' \
' set -x' \
' touch --version' \
'fi' \
'' \
'. $srcdir/test-lib.sh' \
| sed 's/\$/\\\$/g;s/touch/(\\w+)/')
rhs=$(printf '%s\\n' \
'. "${srcdir=.}/init.sh"; path_prepend_ ../src' \
'test "$VERBOSE" = yes && FIXME --version' \
| sed 's/\$/\\\$/g;s/FIXME/\$1/')
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e "s,$lhs,$rhs,"
* NEWS: Document this.
* doc/coreutils.texi (stat invocation): Likewise.
* gl/lib/fstimeprec.c, gl/lib/fstimeprec.h, gl/modules/fstimeprec:
* gl/modules/fstimeprec-tests, gl/tests/test-fstimeprec.c:
New files.
* bootstrap.conf (gnulib_modules): Add fstimeprec.
* src/stat.c: Include fstimeprec.h. Don't include xstrtol.h.
(decimal_point, decimal_point_len): New static vars.
(main): Initialize them.
(epoch_sec, out_ns): Remove.
(out_int, out_uint): Now returns whatever printf returned.
(out_minus_zero, out_epoch_secs): New functions.
(print_stat): Use out_epoch_sec instead of out_ns and epoch_sec.
(print_stat, print_it, usage): Remove the %:X-style formats.
* tests/misc/stat-nanoseconds: Set TZ=UTC0 to avoid problems
with weird time zones. Use a time stamp near the Epoch so that we
don't have to worry about leap seconds. Redo test cases to match
new behavior.
* tests/touch/60-seconds: Change %Y.%:Y to %.9Y, to adjust to
new behavior.
This reverts part of the recent commit 9069af45,
"stat: print timestamps to full resolution", which made %X, %Y, %Z
print floating point numbers. We prefer to retain portability of
%X, %Y and %Z uses, while still providing access to full-resolution
time stamps via modified format strings. Also make the new
%W consistent.
* src/stat.c: Include "xstrtol.h".
(print_it): Accept a new %...:[XYZ] format directive,
e.g., %:X, to print the nanoseconds portion of the corresponding time.
For example, %3.3:Y prints the zero-padded, truncated, milliseconds
part of the time of last modification.
(print_it): Update print_func signature to match.
(neg_to_zero): New helper function.
(epoch_time): Remove function; replace with...
(epoch_sec): New function; use timetostr.
(out_ns): New function. Use "09" only when no other modifier
is specified.
(print_statfs): Change type of "m" to unsigned int,
now that it must accommodate values larger than 255.
(print_stat): Likewise.
Map :X to a code of 'X' + 256. Likewise for Y, Z and W.
(usage): Update.
* tests/touch/60-seconds: Use %Y.%:Y in place of %Y.
* tests/misc/stat-nanoseconds: New file.
* tests/Makefile.am (TESTS): Add it.
* NEWS (Changes in behavior): Mention this.
With improvements by Pádraig Brady.
Thanks to Andreas Schwab for raising the issue.
* src/stat.c (epoch_time): New function.
(print_stat): Use it for %[WXYZ].
* NEWS: Document this.
* tests/touch/60-seconds: Adjust test to match.
* tests/misc/stat-birthtime: Likewise.
* tests/cp/acl: Support USE_ACL not being defined.
* tests/mv/acl: Likewise. Also fix typo in skip message.
* tests/cp/preserve-slink-time: Support HAVE_UTIMENSAT being 0.
* tests/touch/no-dereference: Likewise.
* tests/ls/capability: Normalize so 1 is not required to be last char.
