mirror/limine
1
0
Fork 0
mirror of https://codeberg.org/Limine/Limine synced 2026-01-26 13:14:28 +00:00
Code Issues Packages Projects Releases Wiki Activity
limine/ChangeLog

1562 lines
52 KiB
Plaintext
Raw Blame History

2025-11-30 Mintsuki <mintsuki@protonmail.com>
*** Release 10.4.0 ***
Noteworthy changes compared to the previous release, 10.3.2:
New features:
- Add new configuration file option "global_dtb" to allow overriding
the device tree used by Limine itself as well as for all boot entries
(unless overridden by entry-local "dtb_path" option).
Bug fixes:
- Flush entire I-Cache if it is not PIPT on aarch64.
- Fix use-after-free bug in riscv64 initialisation code related to
device tree handling.
Miscellaneous:
- Framebuffer-related caching improvements for riscv64 and aarch64.
This should fix a long standing issue where, on a lot of riscv64
boards, the Limine interface would look mangled due to missing cache
flushing.
- Prioritise using ACPI for riscv64 initialisation code if available
and if a DTB is not manually specified.
2025-11-23 Mintsuki <mintsuki@protonmail.com>
*** Release 10.3.2 ***
Noteworthy changes compared to the previous release, 10.3.1:
CI-related changes, otherwise, same as 10.3.1.
2025-11-23 Mintsuki <mintsuki@protonmail.com>
*** Release 10.3.1 ***
Noteworthy changes compared to the previous release, 10.3.0:
Bug fixes:
- Fix wrong virtual address related constants, for the loongarch64
port, that made Limine-protocol kernels fail to boot.
- Fix issue that caused the MBR ID in the Limine boot protocol
limine_file structure to always be 0.
2025-11-07 Mintsuki <mintsuki@protonmail.com>
*** Release 10.3.0 ***
Noteworthy changes compared to the previous release, 10.2.1:
**Special notes:**
Despite there being breaking changes in this release, no major version
bump is done; this is because the changes are minor enough, there are
no big new features, and version 10.x was not released long enough ago.
This is technically in violation of Semantic Versioning, but considered
to be an acceptable exception.
Breaking changes:
- Change default paths and default path ordering for configuration file
search. Mainly, search first for a configuration file in the same
directory as the EFI application file of Limine, on EFI ports.
- Change default path ordering for stage 3 file search on BIOS ports.
- No longer install the limine.h header file on the host.
- No longer install PROTOCOL.md (Limine Boot Protocol specification) on
the host.
Bug fixes:
- Fix an issue where code assumed that the RSDT address in the RSDP was
always non-NULL, which could cause crashes or hangs when using base
revision 4 of the Limine Boot Protocol.
2025-10-29 Mintsuki <mintsuki@protonmail.com>
*** Release 10.2.1 ***
Noteworthy changes compared to the previous release, 10.2.0:
Bug fixes:
- Add workaround for skipping SPI flash devices exposed as EFI volumes.
This fixes the hanging issues on many ARM laptops, without breaking
U-Boot unlike the previous workaround.
2025-10-26 Mintsuki <mintsuki@protonmail.com>
*** Release 10.2.0 ***
Noteworthy changes compared to the previous release, 10.1.1:
New features:
- Implement base revision 4 of the Limine boot protocol as per
documentation (read documentation for specific details).
Bug fixes:
- "Fix" multiboot1 framebuffer structure to match GRUB instead of the
multiboot1 specification.
2025-10-13 Mintsuki <mintsuki@protonmail.com>
*** Release 10.1.1 ***
Noteworthy changes compared to the previous release, 10.1.0:
Bug fixes:
- DTBs: Always reallocate DTBs to bootloader-reclaimable memory. This
is to prevent pointers to EFI/reserved memory from being leaked to
Limine protocol executables, which is against said protocol, which
mandates that DTBs have to be in bootloader-reclaimable memory.
2025-10-05 Mintsuki <mintsuki@protonmail.com>
*** Release 10.1.0 ***
Noteworthy changes compared to the previous release, 10.0.1:
New features:
- Expand safety checks of the `limine bios-install` command and replace
the `--force-mbr` flag with just `--force`.
- Add autodetection of the BIOS boot partition if no explicit partition
index is passed to `limine bios-install`.
Bug fixes:
- Only use ASCII characters for terminal output when graphical output
fails to initialise and the EFI standard output console is used
instead.
Miscellaneous:
- Remove left-over logic that was meant to supplement the removed GPT
embedding feature.
- Remove workaround to allow building the RISC-V port with LLVM <=16.
- Update a bunch of output messages from the `limine` host tool.
2025-09-21 Mintsuki <mintsuki@protonmail.com>
*** Release 10.0.1 ***
Noteworthy changes compared to the previous release, 10.0.0:
Bug fixes:
- Fix a potential use-after-free issue when flushing interrupts on x86
UEFI systems.
- Prefer using the 32-bit Linux protocol unless it is strictly
necessary to use the 64-bit protocol due to allocation constraints.
This is due to reports of the 32-bit protocol being more reliable
on certain rare systems where the 64-bit protocol crashes or hangs.
2025-09-15 Mintsuki <mintsuki@protonmail.com>
*** Release 10.0.0 ***
Noteworthy changes compared to the previous release, 9.6.7:
Breaking changes:
- GPT embedding is no longer supported as a deployment method for
GPT-with-BIOS configurations. The rationale for this being that it is
far too fragile, especially with regards to growing or shrinking disk
images, and it may cause certain machines to refuse to boot such
setups as they are technically in violation of the GPT specification.
- The default baud rate for serial I/O on BIOS systems is now 115200,
instead of 9600.
- BIOS (chainloading) boot menu entries are now hidden when booting in
UEFI mode, and EFI (chainloading) entries are hidden when booting in
BIOS mode.
- For the Limine boot protocol, for relocatable executables, KASLR now
defaults to being disabled. The rationale for this being that KASLR
is a somewhat niche and fairly bypassable security technique, which
can cause headaches for kernels not wanting to support it, and make
troubleshooting harder.
- For the Limine boot protocol, for PE format kernels, do not discard
discardable sections, as code put to a discardable section like INIT
might be intended to only be discarded after early kernel init, not
before the kernel is even loaded.
2025-09-13 Mintsuki <mintsuki@protonmail.com>
*** Release 9.6.7 ***
Noteworthy changes compared to the previous release, 9.6.6:
Bug fixes:
- Relax EFI handle validation before running fallback volume detection.
This further addresses issues caused by 9.5.4.
2025-09-06 Mintsuki <mintsuki@protonmail.com>
*** Release 9.6.6 ***
Noteworthy changes compared to the previous release, 9.6.5:
Bug fixes:
- Fix regression introduced by 9.5.4 that caused Limine to fail to boot
with U-Boot.
2025-08-30 Mintsuki <mintsuki@protonmail.com>
*** Release 9.6.3 through 9.6.5 ***
Noteworthy changes compared to the previous release, 9.6.2:
These are special hotfix releases attempting to address issues with the
Forgejo release workflow after the migration to Codeberg.
Other than that, they have no differences compared to 9.6.2.
2025-08-30 Mintsuki <mintsuki@protonmail.com>
*** Release 9.6.2 ***
Noteworthy changes compared to the previous release, 9.6.1:
Miscellaneous:
- The Limine project has moved its home to Codeberg.
- Nyu-EFI was rebranded to PicoEFI.
- Minor build system improvements and subproject bumps.
2025-08-16 Mintsuki <mintsuki@protonmail.com>
*** Release 9.6.1 ***
Noteworthy changes compared to the previous release, 9.6.0:
Bug fixes:
- EFI chainloading: Make EFI device path of loaded image relative to
the loaded image device handle. This now complies with the EFI
specification, and, amongst others, it fixes chainloading Shim.
Miscellaneous:
- Miscellaneous build system changes and improvements.
- Do not disable linker relaxations for LoongArch64.
- `limine` host tool: Add check to ensure that a provided GPT BIOS
partition is at least 32KiB in size.
2025-08-07 Mintsuki <mintsuki@protonmail.com>
*** Release 9.6.0 ***
Noteworthy changes compared to the previous release, 9.5.4:
Miscellaneous:
- Get rid of the fragile and messy "freestanding-toolchain" build
helper tool. This allows for a simpler and more predictable way of
selecting the target toolchain components via ./configure.
2025-08-06 Mintsuki <mintsuki@protonmail.com>
*** Release 9.5.4 ***
Noteworthy changes compared to the previous release, 9.5.3:
Bug fixes:
- Exclude non-PCI devices from the volume discovery process on UEFI.
This is because on (especially, but not limited to) Snapdragon X
systems, firmware/flash devices, which are non-PCI, are exposed as
block I/O volumes too. This skips them, which makes the bootloader
more reliable and avoids long hangs at boot.
- Miscellaneous changes and fixes to the fallback volume discovery
path, to increase reliability and reduce the chance of accidental
damage or data loss. See GitHub issue #525.
- Minor assembly improvement that fixed Limine not building with old
NASM.
2025-08-04 Mintsuki <mintsuki@protonmail.com>
*** Release 9.5.3 ***
Noteworthy changes compared to the previous release, 9.5.2:
Bug fixes:
- Miscellaneous build system fixes, mainly to sort out possible issues
introduced by 9.5.2.
2025-08-01 Mintsuki <mintsuki@protonmail.com>
*** Release 9.5.2 ***
Noteworthy changes compared to the previous release, 9.5.1:
Bug fixes:
- Revert change that moved to `nm` from `objdump` for generating the
symbol table, as that broke section-specific symbol dumps and caused
BIOS stage 2 to be bloated with the full symbol table.
Miscellaneous:
- Miscellaneous build system updates and improvements.
2025-07-29 Mintsuki <mintsuki@protonmail.com>
*** Release 9.5.1 ***
Noteworthy changes compared to the previous release, 9.5.0:
Bug fixes:
- Unbreak build using ld.gold as linker.
Miscellaneous:
- Miscellaneous build system updates and improvements.
2025-07-14 Mintsuki <mintsuki@protonmail.com>
*** Release 9.5.0 ***
Noteworthy changes compared to the previous release, 9.4.0:
New features:
- protocols/efi: Hybridise loading mechanism with old memory-device
based approach. This may work around the redundant requirement that
EFI applications be signed, and it may fix certain issues created
when the chainload mechanism was changed in 9.0.1.
Bug fixes:
- `limine` host tool: Fix some mismatched printf format specifiers.
Miscellaneous:
- Miscellaneous build system updates and improvements.
- Many dependencies had their commits bumped, some new dependencies
were added (limine-protocol), some were changed (libfdt moved to a
different repository that only includes BSD-2-Clause licensable
code).
2025-07-10 Mintsuki <mintsuki@protonmail.com>
*** Release 9.4.0 ***
Noteworthy changes compared to the previous release, 9.3.4:
New features:
- BLI: Implement `LoaderTimeInitUSec` and `LoaderTimeExecUSec`.
These are variables used by `systemd-analyze` and are useful for boot
performance metrics.
- Limine boot protocol: Add bootloader performance feature.
This feature provides the same information as the new Boot Loader
Interface variables, but encoded in a nicer way for Limine protocol
executables.
Miscellaneous:
- Use `nm` instead of `objdump` for generating the symbol table, which
results in a better, more consistent output, especially for non-x86
architectures.
- Miscellaneous build system updates and improvements.
2025-06-21 Mintsuki <mintsuki@protonmail.com>
*** Release 9.3.4 ***
Noteworthy changes compared to the previous release, 9.3.3:
Bug fixes:
- ELF: Make an optimisation related to skipping scanning of .bss
regions for finding of structures in the loaded image (for Limine
protocol structures or otherwise) less overeager as that could break
in certain cases.
- SMP: On x86, ensure that the value of IA32_APIC_BASE is the same on
the APs as it is on the BSP.
- PMM: Mark EfiLoader{Code,Data} regions as bootloader reclaimable
rather than reserved memory, as for certain protocols, like the
Limine boot protocol, reserved memory is unmapped at runtime, while
these regions may contain hot data that is still needed, like Limine
bootloader memory stacks.
2025-05-27 Mintsuki <mintsuki@protonmail.com>
*** Release 9.3.3 ***
Noteworthy changes compared to the previous release, 9.3.2:
Bug fixes:
- Reinstate the limit for scanned drives to 0xf0. This is due to a
report of int 13h hangs when used on drives >=0xf0.
2025-05-19 Mintsuki <mintsuki@protonmail.com>
*** Release 9.3.2 ***
Noteworthy changes compared to the previous release, 9.3.1:
Bug fixes:
- PMM: Mark EfiBootServices{Code,Data} memory regions as bootloader
reclaimable instead of usable free memory as apparently the ACPI
and UEFI specifications make no guarantees about useful structures
being left in these areas after leaving boot services (namely BGRT
and ESRT).
2025-05-15 Mintsuki <mintsuki@protonmail.com>
*** Release 9.3.1 ***
Noteworthy changes compared to the previous release, 9.3.0:
Bug fixes:
- Remove .git directory mistakenly left over inside release tarballs.
- Fix bug that would lead to panics when booting Linux protocol kernels
without modules on x86.
2025-05-07 Mintsuki <mintsuki@protonmail.com>
*** Release 9.3.0 ***
Noteworthy changes compared to the previous release, 9.2.3:
New features:
- Add optional support for the 64-bit x86-64 boot protocol for Linux.
This is supported on the UEFI/x86-64 port of Limine, and it is
preferred over the 32-bit boot protocol if supported by the given
kernel. This helps with loading larger modules on certain systems
with low amounts of low memory which would otherwise panic.
Bug fixes:
- Fix away some ungraceful handling of out-of-memory situations when
loading files using the Linux boot protocol. Make into panics instead
of crashes or hangs.
Miscellaneous:
- Improve performance and memory usage of loading modules for the Linux
boot protocol.
2025-04-12 Mintsuki <mintsuki@protonmail.com>
*** Release 9.2.3 ***
Noteworthy changes compared to the previous release, 9.2.2:
Bug fixes:
- Fix issues introduced by the stb_image fix introduced in 9.2.1 which
could cause hangs or crashes when certain wallpaper images are used.
Miscellaneous:
- Update cc-runtime to new, integer-only, packed version.
2025-03-31 Mintsuki <mintsuki@protonmail.com>
*** Release 9.2.2 ***
Noteworthy changes compared to the previous release, 9.2.1:
Bug fixes:
- Two quick bug fixes and workarounds in order to make multiboot2 more
resilient when booting specific kernels such as Xen.
- Avoid mistakenly allocating more memory than necessary when creating
the volume index.
2025-03-25 Mintsuki <mintsuki@protonmail.com>
*** Release 9.2.1 ***
Noteworthy changes compared to the previous release, 9.2.0:
Bug fixes:
- Fix potential buffer overflow bug with our stb_image support code.
Miscellaneous:
- Dynamically allocate volume index instead of relying on a hard coded
limit and a fixed allocation. This fixes potential panics or failure
to access volumes on systems with a lot of drives/partitions.
- Limine boot protocol/ELF: Print the name of unresolved symbols on
panic.
2025-03-16 Mintsuki <mintsuki@protonmail.com>
*** Release 9.2.0 ***
Noteworthy changes compared to the previous release, 9.1.3:
New features:
- Introduce initial support for the Boot Loader Interface
specification.
- Add /EFI/limine/limine.conf to the paths tried for config file when
using EFI.
Miscellaneous:
- Do not try config path /EFI/BOOT/limine.conf unless booted using EFI.
2025-03-13 Mintsuki <mintsuki@protonmail.com>
*** Release 9.1.3 ***
Noteworthy changes compared to the previous release, 9.1.2:
Bug fixes:
- Loongarch64: Fix alignment of TLB-refill handler.
Miscellaneous:
- Many fixes and improvements to documentation, installed or otherwise,
including further licensing clarifications.
2025-03-11 Mintsuki <mintsuki@protonmail.com>
*** Release 9.1.2 ***
Noteworthy changes compared to the previous release, 9.1.1:
This release does not change anything code-wise, but rather it focuses on
sorting out the licensing mess of Nyu-EFI, by updating it to the latest
revision which tackles this problem, and furthermore it improves the
COPYING file to be more explicit about submodules and their licensing.
2025-03-10 Mintsuki <mintsuki@protonmail.com>
*** Release 9.1.1 ***
Noteworthy changes compared to the previous release, 9.1.0:
Bug fixes:
- Do not use ConOut for serial output exclusively unless serial is
verified to be present to the best of our abilities. This fixes an
issue where if `serial=yes` is used on some machines (including
several Apple Mac models) a black screen will be shown instead of the
Limine menu.
Miscellaneous:
- Begin signing tarballs and (most) commits.
2025-03-07 Mintsuki <mintsuki@protonmail.com>
*** Release 9.1.0 ***
Noteworthy changes compared to the previous release, 9.0.1:
New features:
- `limine` host tool: When using the `bios-install` command on an
ISOHYBRID with a GPT, automatically convert it to MBR, if possible
and unless explicitly disabled, in order to enhance compatibility of
said ISOHYBRIDs with many systems (of note, Lenovo Thinkpads).
2025-02-25 Mintsuki <mintsuki@protonmail.com>
*** Release 9.0.1 ***
Noteworthy changes compared to the previous release, 9.0.0:
Miscellaneous:
- EFI chainload: Replace old chainload method with one that is more
friendly to other EFI bootloaders such as rEFInd.
- Limine boot protocol/PE: Map previously unmapped PE image headers.
2025-02-17 Mintsuki <mintsuki@protonmail.com>
*** Release 9.0.0 ***
Noteworthy changes compared to the previous release, 8.7.0:
Breaking changes:
- Support for the ext2/3/4 filesystems has been once again dropped due
to lack of maintenance and to avoid extra potential attack surface
during Secure Boot Limine usage.
- Drop support for the legacy config format (limine.cfg) and only keep
around the new one (limine.conf) introduced with Limine 8.x.
- Drop support for the (barely worked and seldom used) `chainload_next`
protocol.
New features:
- Limine boot protocol: Introduce API revision 3, for the `limine.h`
file with several renamed identifiers for better clarity.
- Limine boot protocol: Specify and implement a new, convenience,
"Executable Command Line feature".
- Limine boot protocol: Use monitor/mwait CPU instructions, when
available, to reduce CPU usage and increase performance during
multiprocessor initialisation.
- Add preferred aliases for BIOS and EFI chainload (namely `bios` and
`efi`) protocol names for the `protocol` config option.
Bug fixes:
- EFI (chainload) boot protocol: Fix `path` option alias not working.
Miscellaneous:
- Update Flanterm submodule to latest.
2025-01-10 Mintsuki <mintsuki@protonmail.com>
*** Release 8.7.0 ***
Noteworthy changes compared to the previous release, 8.6.1:
New features:
- Limine boot protocol: Add support for PE executables.
- Linux boot protocol: Enable support for Loongarch64.
- Add support for selecting a random wallpaper every boot if multiple
are provided.
- Add `path` aliases for `kernel_path` and `image_path` for the Linux
and EFI Chainloading protocols respectively.
Miscellaneous:
- Submodule version/commit bumps.
2024-12-26 Mintsuki <mintsuki@protonmail.com>
*** Release 8.6.1 ***
Noteworthy changes compared to the previous release, 8.6.0:
Bug fixes:
- Propagate EFI PXE device handle properly when chainloading.
- Ensure that, when specifying a `dtb_path`, extra space is properly
allocated just as is done for EFI-provided DTBs.
Miscellaneous:
- Linux on RISCs: General code clean up; pass EFI memory map and initrd
information as EFI configuration tables alongside already passed DTB
parameters for the same, in preparation for loongarch64 support.
2024-12-05 Mintsuki <mintsuki@protonmail.com>
*** Release 8.6.0 ***
Noteworthy changes compared to the previous release, 8.5.0:
New features:
- Limine boot protocol: Specify and implement new "RISC-V BSP Hart ID"
feature.
- Limine boot protocol: Add a new "SBI" firmware type to the firmware
type feature
- Limine boot protocol: Add a new API revision 2 to the limine.h header
file. This replaces many mentions of 'kernel' with a more neutral
'executable' instead.
- Config: add 'path' alias for 'kernel_path' for the Limine and
multiboot1 and 2 protocols.
2024-11-30 Mintsuki <mintsuki@protonmail.com>
*** Release 8.5.0 ***
Noteworthy changes compared to the previous release, 8.4.1:
New features:
- Limine boot protocol: Introduce limine.h API revisions to avoid API
breaks.
Bug fixes:
- Limine boot protocol: Amend base revision 3 to keep EFI memmap
pointer as virtual. Making it physical made no sense and is
henceforth considered a bug.
Miscellaneous:
- Limine boot protocol: Rename SMP feature to MP feature for limine.h
API revision 1+.
- Limine boot protocol: Make some types that were void pointers into
uint64_t's to better represent their physical nature; limine.h API
revision 1+.
2024-11-25 Mintsuki <mintsuki@protonmail.com>
*** Release 8.4.1 ***
Noteworthy changes compared to the previous release, 8.4.0:
Miscellaneous:
- Limine boot protocol: Ensure machines with pre-enabled x2APIC are
properly supported.
- Reuse a viable framebuffer for UEFI fallback terminal output (like on
panics) if boot services have been exited instead of bailing out.
- Miscellaneous build system updates.
2024-11-08 Mintsuki <mintsuki@protonmail.com>
*** Release 8.4.0 ***
Noteworthy changes compared to the previous release, 8.3.2:
New features:
- Support passing Limine its configuration via SMBIOS tables.
Miscellaneous:
- Update cc-runtime to latest; use non-packed version.
2024-10-31 Mintsuki <mintsuki@protonmail.com>
*** Release 8.3.2 ***
Noteworthy changes compared to the previous release, 8.3.1:
Miscellaneous:
- Limine boot protocol: Amend base revision 3 to mandate reporting base
revision used to kernels.
2024-10-28 Mintsuki <mintsuki@protonmail.com>
*** Release 8.3.1 ***
Noteworthy changes compared to the previous release, 8.3.0:
Bug fixes:
- Limine boot protocol: Revert broken optimisation.
2024-10-28 Mintsuki <mintsuki@protonmail.com>
*** Release 8.3.0 ***
Noteworthy changes compared to the previous release, 8.2.0:
New features:
- Limine boot protocol: Specify and implement base revision 3. See the
specification for further info.
- Add a new `FW_TYPE` built-in config macro.
Miscellaneous:
- Bump Flanterm revision to a6f6edd6631c01caab932a59dce97bbd5f0c72c8.
- Limine boot protocol: Misc optimisations to page tables usage.
2024-10-23 Mintsuki <mintsuki@protonmail.com>
*** Release 8.2.0 ***
Noteworthy changes compared to the previous release, 8.1.2:
New features:
- Add device tree blob override configuration options for the Limine
and Linux boot protocols.
- Limine boot protocol: Filter `memory@...` nodes out of device trees.
Miscellaneous:
- Documentation: USAGE.md: Update `xorriso` command to produce
ISOHYBRIDs with Joliet info and an HFS+ filesystem for broader
compatibility.
- Increase the size of the `limine-cd-uefi.bin` image to 5760 sectors;
this allows more and/or larger EFI executables to fit (like for
example those generated when compiling with -O0).
- Bump cc-runtime revision to d5425655388977fa12ff9b903e554a20b20c426e.
2024-10-15 Mintsuki <mintsuki@protonmail.com>
*** Release 8.1.2 ***
Noteworthy changes compared to the previous release, 8.1.1:
Bug fixes:
- Add missing register saves and restores around call from assembly to
C code for the x86-64 UEFI port. This bug could have caused crashes
with certain compiler optimisation levels (like -O0).
- Adjust size of reserved area of VBE mode info struct to be the right
size. This bug could have caused crashes with certain compiler
optimisation levels (like -O0).
- Ignore UEFI memory map entries of length 0. This fixes crashes that
could have happened on quirky UEFI firmwares passing such entries.
2024-10-12 Mintsuki <mintsuki@protonmail.com>
*** Release 8.1.1 ***
Noteworthy changes compared to the previous release, 8.1.0:
Bug fixes:
- Limine boot protocol: Do not hard depend on the CPU supporting the
Page Attribute Table (PAT) *for SMP processors as well*.
2024-10-12 Mintsuki <mintsuki@protonmail.com>
*** Release 8.1.0 ***
Noteworthy changes compared to the previous release, 8.0.14:
Bug fixes:
- Limine boot protocol: Do not hard depend on the CPU supporting the
Page Attribute Table (PAT).
New features:
- Limine boot protocol: Add a `randomise_hhdm_base` config file option.
Miscellaneous:
- Update libfdt (from dtc) to 1.7.1.
2024-09-29 Mintsuki <mintsuki@protonmail.com>
*** Release 8.0.14 ***
Noteworthy changes compared to the previous release, 8.0.13:
Miscellaneous:
- Limine boot protocol: Increase maximum memory map entry count from
256 to 1024 as it would otherwise cause issues on certain systems.
2024-09-18 Mintsuki <mintsuki@protonmail.com>
*** Release 8.0.13 ***
Noteworthy changes compared to the previous release, 8.0.12:
Bug fixes:
- multiboot2: Fix handling of relocatable kernels.
2024-09-15 Mintsuki <mintsuki@protonmail.com>
*** Release 8.0.12 ***
Noteworthy changes compared to the previous release, 8.0.11:
Bug fixes:
- Fix a build system problem that could cause configure failures if
STRIP variable set to an absolute path.
Miscellaneous:
- Updates for "freestanding-headers" being rebranded to
"freestnd-c-hdrs-0bsd".
- Updates for "limine-efi" being rebranded to "nyu-efi".
2024-09-10 Mintsuki <mintsuki@protonmail.com>
*** Release 8.0.11 ***
Noteworthy changes compared to the previous release, 8.0.10:
Miscellaneous:
- Replace "freestnd-c-hdrs" back with "freestanding-headers" due to
GPLv3 with Runtime Exceptions licensing concerns and size.
2024-09-09 Mintsuki <mintsuki@protonmail.com>
*** Release 8.0.10 ***
Noteworthy changes compared to the previous release, 8.0.9:
Bug fixes:
- Fix bug where contents of loaded EFI image size variable could be off
significantly compared to actual size when compiled with GCC, causing
many issues.
- Fix memory manager bug introduced in 2021 during optimisation work.
Miscellaneous:
- Replace "freestanding-headers" with GCC-provided "freestnd-c-hdrs".
2024-09-04 Mintsuki <mintsuki@protonmail.com>
*** Release 8.0.9 ***
Noteworthy changes compared to the previous release, 8.0.8:
Bug fixes:
- Fix an issue that could cause Limine to not boot on UEFI systems with
too many memory map entries.
2024-09-03 Mintsuki <mintsuki@protonmail.com>
*** Release 8.0.8 ***
Noteworthy changes compared to the previous release, 8.0.7:
Bug fixes:
- Work around makefile issues that caused GNU make versions 4.0 and 4.1
as well as version 3.80 to fail to build Limine.
2024-09-02 Mintsuki <mintsuki@protonmail.com>
*** Release 8.0.7 ***
Noteworthy changes compared to the previous release, 8.0.6:
Miscellaneous:
- Remove GNU make version check as we now support building on older
make versions.
- Miscellaneous build system improvements.
2024-08-25 Mintsuki <mintsuki@protonmail.com>
*** Release 8.0.6 ***
Noteworthy changes compared to the previous release, 8.0.5:
Bug fixes:
- Fix issue with makefiles that would cause, among others, issues with
job control on older GNU make versions.
Miscellaneous:
- Update limine-efi dependency to latest.
- Minor build system improvements.
2024-08-12 Mintsuki <mintsuki@protonmail.com>
*** Release 8.0.5 ***
Noteworthy changes compared to the previous release, 8.0.4:
Bug fixes:
- Limine boot protocol: Obtain LAPIC ID from LAPIC instead of CPUID.
This fixes crashes on some odd machines whose firmware remaps the
BSP's LAPIC ID from the default one.
2024-08-10 Mintsuki <mintsuki@protonmail.com>
*** Release 8.0.4 ***
Noteworthy changes compared to the previous release, 8.0.3:
Bug fixes:
- Limine boot protocol: Fix off-by-1 error in HHDM MAXPHYADDR bounds
check.
Miscellaneous:
- Updated cc-runtime dependency to latest, packed version.
2024-08-09 Mintsuki <mintsuki@protonmail.com>
*** Release 8.0.3 ***
Noteworthy changes compared to the previous release, 8.0.2:
Bug fixes:
- AArch64, riscv64: SMP: Fix BSP potentially timing out while waiting
for APs due to missing delay.
2024-08-08 Mintsuki <mintsuki@protonmail.com>
*** Release 8.0.2 ***
Noteworthy changes compared to the previous release, 8.0.1:
Bug fixes:
- Menu: Miscellaneous cosmetic fixes.
- Editor: Fix input and displaying of tab characters.
Miscellaneous:
- Config: Accept tab characters as whitespace after option colon.
2024-08-05 Mintsuki <mintsuki@protonmail.com>
*** Release 8.0.1 ***
Noteworthy changes compared to the previous release, 8.0.0:
Bug fixes:
- Assortment of menu fixes to issues that could cause things not to
render as they should.
Miscellaneous:
- Documentation fixes for 8.x.
2024-08-02 Mintsuki <mintsuki@protonmail.com>
*** Release 8.0.0 ***
Noteworthy changes compared to the previous release, 7.13.3:
New features:
- Add loongarch64 support.
Bug fixes:
- Limine boot protocol: Ensure higher half direct map size does not
exceed MAXPHYADDR on x86.
Miscellaneous:
- Extensive changes to the config syntax. (See CONFIG.md).
- Rename term_wallpaper, term_wallpaper_style, and term_backdrop config
options to remove the term_ prefix.
- Removed support for GZ-compressed files (and internal Limine
protocol modules).
2024-08-02 Mintsuki <mintsuki@protonmail.com>
*** Release 7.13.3 ***
Noteworthy changes compared to the previous release, 7.13.2:
Bug fixes:
- Limine boot protocol: Fix broken comparison that could cause an HHDM
too large to not be properly detected.
- Limine boot protocol: aarch64: Fix incorrect macro value that would
cause the size of the higher half to be incorrectly detected as half.
Miscellaneous:
- Remove Nix flake stuff from repository/tarball.
2024-07-30 Mintsuki <mintsuki@protonmail.com>
*** Release 7.13.2 ***
Noteworthy changes compared to the previous release, 7.13.1:
Bug fixes:
- Limine boot protocol: Fix a bug introduced in 7.13.0 that made
compressed modules not work on IA-32 ports.
2024-07-29 Mintsuki <mintsuki@protonmail.com>
*** Release 7.13.1 ***
Noteworthy changes compared to the previous release, 7.13.0:
Bug fixes:
- Limine boot protocol: Fix a bug introduced in 7.13.0 that made the
protocol unusable with the BIOS port when loading any modules, when
Limine was linked using ld.bfd.
2024-07-29 Mintsuki <mintsuki@protonmail.com>
*** Release 7.13.0 ***
Noteworthy changes compared to the previous release, 7.12.1:
New features:
- Limine boot protocol: Allow above-4GiB load of modules on IA-32
ports.
Miscellaneous:
- Build system improvements.
2024-07-27 Mintsuki <mintsuki@protonmail.com>
*** Release 7.12.1 ***
Noteworthy changes compared to the previous release, 7.12.0:
Miscellaneous:
- Limine boot protocol: limit the HHDM size to half of the higher half
in all conditions; limit HHDM KASLR wiggle room to a quarter rather
than half of the higher half.
- Build system improvements.
2024-07-21 Mintsuki <mintsuki@protonmail.com>
*** Release 7.12.0 ***
Noteworthy changes compared to the previous release, 7.11.0:
New features:
- Reinstate support for ext2/3/4, albeit in an unsupported and
unmaintained state, at least for the time being.
- Menu: Add vertical bars around entry title in entry editor.
- Menu: Add clearer indications of what is wrong when config invalid or
missing.
Bug fixes:
- Terminal: Fix long standing wallpaper drawing related bug that under
certain circumstances could cause memory corruption.
- Miscellaneous VBE related bug fixes.
- Miscellaneous A20 line related improvements/fixes.
Miscellaneous:
- Limine boot protocol: perform appropriate checks to ensure that the
higher half direct map fits in the higher half; enforce paging modes
as needed.
- Limine boot protocol: aarch64: Specify that the granule size for both
TTBR0_EL1 and TTBR1_EL1 is 4KiB.
- Limine boot protocol: aarch64: Specify the values of TCR_EL1.T0SZ and
TCR_EL1.T1SZ depending on the paging mode used.
- Limine boot protocol: aarch64: Specify the condition of TTBR0_EL1 and
TTBR1_EL1 at entry.
2024-07-18 Mintsuki <mintsuki@protonmail.com>
*** Release 7.11.0 ***
Noteworthy changes compared to the previous release, 7.10.3:
New features:
- Limine boot protocol: Specify and implement "firmware type" feature.
- Limine boot protocol: Specify and implement revision 1 "paging mode"
request extension.
2024-07-16 Mintsuki <mintsuki@protonmail.com>
*** Release 7.10.3 ***
Noteworthy changes compared to the previous release, 7.10.2:
Bug fixes:
- Menu: Fix high menu entry count support that was previously broken in
a regression.
- Linux boot protocol: Install "memory reservation" EFI configuration
table on aarch64/riscv64.
Miscellaneous:
- Miscellaneous improvements and optimisations of code introduced in
version 7.10.2.
2024-07-14 Mintsuki <mintsuki@protonmail.com>
*** Release 7.10.2 ***
Noteworthy changes compared to the previous release, 7.10.1:
Bug fixes:
- Fix a long standing issue with volume detection on UEFI.
- Fix issue returning to editor after a panic when coming from a blank
entry without a valid config.
- Add missing "loading" prints when booting Linux on non-x86.
2024-07-12 Mintsuki <mintsuki@protonmail.com>
*** Release 7.10.1 ***
Noteworthy changes compared to the previous release, 7.10.0:
Bug fixes:
- DTB: Never pass UEFI DTB buffer directly; fix misuse of libfdt API.
2024-07-12 Mintsuki <mintsuki@protonmail.com>
*** Release 7.10.0 ***
Noteworthy changes compared to the previous release, 7.9.2:
New features:
- SMP: Support SMP on AArch64 without ACPI.
Bug fixes:
- SMP: Do not allocate a useless stack for the BSP.
- `limine`: Protect against overwriting MBR partitions beginning at
exceedingly low sector values (outside de facto specification).
Miscellaneous:
- Limine boot protocol: Do not pass responses if RSDP or SMBIOS not
available instead of returning responses with NULL pointers.
- Limine boot protocol: Do not pass a framebuffer response if no
framebuffers are available.
2024-07-06 Mintsuki <mintsuki@protonmail.com>
*** Release 7.9.2 ***
Noteworthy changes compared to the previous release, 7.9.1:
Bug fixes:
- Limine boot protocol: Return NULL response instead of a response with
erroneous CPU count of 0 for SMP on x86-64, if x2APIC support not
enabled and missing xAPIC fallback.
- Limine boot protocol: Do not ignore MAX_PAGING_MODE config setting if
paging mode request missing from loaded kernel.
Miscellaneous:
- Limine boot protocol/ELF: Apply a slide of 0xffffffff80000000 minus
the ELF-reported base load address for relocatable kernels that have
lower half load addresses, instead of always applying a slide of
0xffffffff80000000.
2024-06-29 Mintsuki <mintsuki@protonmail.com>
*** Release 7.9.1 ***
Noteworthy changes compared to the previous release, 7.9.0:
Bug fixes:
- `limine`: Revert change that marked protective MBR wrapper partition
as active on GPT.
2024-06-28 Mintsuki <mintsuki@protonmail.com>
*** Release 7.9.0 ***
Noteworthy changes compared to the previous release, 7.8.0:
New features:
- Linux boot protocol: Add support on aarch64 and riscv64.
Bug fixes:
- multiboot1/2: Relax ELF file type requirements (mainly for multiboot2
relocatable kernels).
- UEFI: Fix bug that caused delete key to behave as if it was backspace
even when the SERIAL config option was not "yes".
Miscellaneous:
- Limine boot protocol/ELF: Do not consider ELFs relocatable unless the
ELF file type is ET_DYN.
- Some dead code removal.
2024-06-24 Mintsuki <mintsuki@protonmail.com>
*** Release 7.8.0 ***
Noteworthy changes compared to the previous release, 7.7.2:
New features:
- Return to booted edited entry on panic.
Bug fixes:
- `limine`: Mark protective MBR wrapper partition as active on GPT.
Miscellaneous:
- UEFI: Allocate most memory as EfiLoaderCode instead of EfiLoaderData.
- Smaller fixes and improvements.
2024-06-09 Mintsuki <mintsuki@protonmail.com>
*** Release 7.7.2 ***
Noteworthy changes compared to the previous release, 7.7.1:
Bug fixes:
- Limine boot protocol/ELF: Ignore PT_LOAD segments with 0 memory size.
- Limine boot protocol/ELF: Panic on non-weak unresolved symbols.
- Limine boot protocol/ELF: Do not sanity check DT_RELAENT size for non
DT_RELA relocations. This is because DT_RELAENT may not be present.
- multiboot 1 and 2 protocols: Reject relocatable ELFs.
2024-06-06 Mintsuki <mintsuki@protonmail.com>
*** Release 7.7.1 ***
Noteworthy changes compared to the previous release, 7.7.0:
Bug fixes:
- Limine boot protocol/ELF: Stop parsing PT_DYNAMIC segment once
DT_NULL is reached.
2024-06-04 Mintsuki <mintsuki@protonmail.com>
*** Release 7.7.0 ***
Noteworthy changes compared to the previous release, 7.6.0:
New features:
- Limine boot protocol/ELF: Add support for GLOB_DAT, JUMP_SLOT, 64,
and NONE relocation types.
- Limine boot protocol/ELF: Add RELR (packed relative relocations)
support.
Bug fixes:
- Limine boot protocol/ELF: Reject ELFs that depend on external
dynamically linked libraries.
Miscellaneous:
- Bring back .xz compressed release tarball.
2024-06-01 Mintsuki <mintsuki@protonmail.com>
*** Release 7.6.0 ***
Noteworthy changes compared to the previous release, 7.5.3:
New features:
- RISC-V: Add support for RISC-V systems without ACPI (using DTBs).
2024-05-24 Mintsuki <mintsuki@protonmail.com>
*** Release 7.5.3 ***
Noteworthy changes compared to the previous release, 7.5.2:
Bug fixes:
- Multiboot 2 protocol: Fix an issue where the 32-bit EFI Image Handle
tag would be generated under 64-bit EFI and vice versa.
- Do not set VirtualStart to PhysicalStart when generating the EFI
memory map; set it to 0 instead.
- Do not perform additional checks when loading relocatable ELF files
after verifying that they are of type ET_DYN and have a PT_DYNAMIC
segment. This ensures that certain relocatable ELF files that were
previously misidentified as non-relocatable are recognised as such.
2024-05-22 Mintsuki <mintsuki@protonmail.com>
*** Release 7.5.2 ***
Noteworthy changes compared to the previous release, 7.5.1:
Bug fixes:
- Fix missing checks in the FAT filesystem driver that could cause
divide-by-0 exceptions when parsing malformed/corrupted filesystems.
- Limine boot protocol: Do not reject relocatable kernels with ELF PHDR
load addresses at or around 0, instead slide them all the way to the
topmost 2GiB (0xffffffff80000000). This allows setting a base load
address of 0 in LD BFD/LLD linker scripts which makes LD BFD (the
default GNU LD) actually emit an ELF with ET_DYN type.
2024-05-08 Mintsuki <mintsuki@protonmail.com>
*** Release 7.5.1 ***
Noteworthy changes compared to the previous release, 7.5.0:
Bug fixes:
- Workarounds for issues related to drive iteration on BIOS. Discovered
on an HP Pavilion dv6-3152er.
2024-05-03 Mintsuki <mintsuki@protonmail.com>
*** Release 7.5.0 ***
Noteworthy changes compared to the previous release, 7.4.1:
New features:
- Limine boot protocol: Add support for requests start marker, to
complement the previously called delimiter, now renamed to "end
marker".
- Limine boot protocol: Add base revision 2. The sole difference
compared to base revision 1 being that it mandates bootloaders to
support request delimiters.
Bug fixes:
- Fix an issue regarding commit date parsing in the bootstrap script.
Miscellaneous:
- General documentation updates and improvements; split USAGE.md from
README.md and install the former only.
2024-04-29 Mintsuki <mintsuki@protonmail.com>
*** Release 7.4.1 ***
Noteworthy changes compared to the previous release, 7.4.0:
Miscellaneous:
- Bump max volume limit for UEFI from 64 to 256.
- Improve how ISA name and firmware type is reported as part of the
default branding.
2024-04-20 Mintsuki <mintsuki@protonmail.com>
*** Release 7.4.0 ***
Noteworthy changes compared to the previous release, 7.3.1:
New features:
- ISA name and firmware type is now printed as part of the default
bootloader branding.
- Add 'B' key shortcut to menu to open up a blank entry.
Bug fixes:
- Fix missing NULL pointer check in configuration related function.
Miscellaneous:
- Console has been removed.
2024-04-11 Mintsuki <mintsuki@protonmail.com>
*** Release 7.3.1 ***
Noteworthy changes compared to the previous release, 7.3.0:
Bug fixes:
- Fix a minor issue with scrolling when using the EFI console fallback.
Miscellaneous:
- Bump the Flanterm revision to current latest.
- Some dead code removal.
2024-03-31 Mintsuki <mintsuki@protonmail.com>
*** Release 7.3.0 ***
Noteworthy changes compared to the previous release, 7.2.1:
New features:
- Limine boot protocol: Add a `MAX_PAGING_MODE` configuration option
to override kernel/bootloader selected paging mode.
Bug fixes:
- Fix a couple of minor bugs with the 4GiB workaround introduced in
version 7.2.1.
Miscellaneous:
- No longer produce xz compressed release tarballs. Add bzip2, lzip,
and zstd as alternatives in its place.
2024-03-28 Mintsuki <mintsuki@protonmail.com>
*** Release 7.2.1 ***
Noteworthy changes compared to the previous release, 7.2.0:
Bug fixes:
- Implement workaround to allow Limine loaded above 4GiB by UEFI on
x86-64 to work in some configurations, instead of panicking.
2024-03-24 Mintsuki <mintsuki@protonmail.com>
*** Release 7.2.0 ***
Noteworthy changes compared to the previous release, 7.1.0:
New features:
- Add support for remembering the last booted entry on UEFI by means
of the `REMEMBER_LAST_ENTRY` config option.
2024-03-19 Mintsuki <mintsuki@protonmail.com>
*** Release 7.1.0 ***
Noteworthy changes compared to the previous release, 7.0.5:
New features:
- Limine boot protocol: Add support for requests delimiter.
Bug fixes:
- Fixed a potential security vulnerability in the ISO9660 driver.
2024-02-15 Mintsuki <mintsuki@protonmail.com>
*** Release 7.0.5 ***
Noteworthy changes compared to the previous release, 7.0.4:
Bug fixes:
- Build system related fixes and improvements. This fixes an issue that
caused Limine 7.0.4 to fail building on Busybox systems.
2024-02-14 Mintsuki <mintsuki@protonmail.com>
*** Release 7.0.4 ***
Noteworthy changes compared to the previous release, 7.0.3:
Bug fixes:
- Minor build system related fixes and improvements.
Miscellaneous:
- Significantly improve reproducibility of builds.
2024-02-08 Mintsuki <mintsuki@protonmail.com>
*** Release 7.0.3 ***
Noteworthy changes compared to the previous release, 7.0.2:
Bug fixes:
- multiboot2 protocol: Do not panic if there is a ENTRY_ADDRESS_EFI64
tag, but there is a valid alternative entry point. This further aligns
our behaviour with GRUB2.
Miscellaneous:
- Terminal: Significantly improve serial and fallback UEFI console's
rendition (especially colour palettes).
- Serial: Add a baud rate config setting for Limine's BIOS version.
2024-01-26 Mintsuki <mintsuki@protonmail.com>
*** Release 7.0.2 ***
Noteworthy changes compared to the previous release, 7.0.1:
Bug fixes:
- Fix a cosmetic bug in the menu where, when the editor was disabled,
the controls showed "ENTER Expand" even for boot entries instead of
only for menu directories.
Miscellaneous:
- Exclusively use git for obtaining dependencies in "bootstrap" script.
2024-01-22 Mintsuki <mintsuki@protonmail.com>
*** Release 7.0.1 ***
Noteworthy changes compared to the previous release, 7.0.0:
Bug fixes:
- Fix ARM64/aarch64 spinup code to properly support Apple Silicon
chips.
- Prevent users from building Limine with a GNU Make version older than
4.2, as that is not supported, by gracefully erroring out with a
useful error message.
- Avoid usage of reserved C identifiers in certain cases.
Miscellaneous:
- Drop usage of "libgcc-binaries" for "cc-runtime". This finally makes
us able to ship Limine tarballs without included binary blobs, and
should improve compatibility with more obscure toolchain set ups.
2024-01-14 Mintsuki <mintsuki@protonmail.com>
*** Release 7.0.0 ***
Noteworthy changes compared to the previous release, 6.20240107.0:
Bug fixes:
- Minor fix of newline handling when reading user input lines.
Miscellaneous:
- Bump major version to 7. Note: There is no breaking change in 7.x
compared to 6.x; the major version bump is done due to a change in
the versioning scheme used by Limine (move to proper Semantic
Versioning).
- Fix versions of external dependencies in "bootstrap" script.
2024-01-07 Mintsuki <mintsuki@protonmail.com>
*** Release 6.20240107.0 ***
Noteworthy changes compared to the previous release, 6.20231227.0:
New features:
- Limine boot protocol: Add support for compressed internal modules.
Miscellaneous:
- Improve error reporting from host "limine" executable.
- Track "master" branch of stb_image upstream.
2023-12-27 Mintsuki <mintsuki@protonmail.com>
*** Release 6.20231227.0 ***
Noteworthy changes compared to the previous release, 6.20231226.0:
Bug fixes:
- Actually regenerate build system with GNU Autoconf 2.72 instead of
GNU Autoconf 2.71.
2023-12-26 Mintsuki <mintsuki@protonmail.com>
*** Release 6.20231226.0 ***
Noteworthy changes compared to the previous release, 6.20231216.0:
New features:
- Ignore trailing whitespace in Limine config file.
Miscellaneous:
- Regenerate build system with GNU Autoconf 2.72.
- Minor build system adjustments.
2023-12-16 Mintsuki <mintsuki@protonmail.com>
*** Release 6.20231216.0 ***
Noteworthy changes compared to the previous release, 6.20231210.0:
New features:
- Added a `--print-datadir` switch to the `limine` program in order
to print the directory where Limine files are stored when installed
on a host distro.
Miscellaneous:
- General improvements to the `--help` texts for the `limine` program.
2023-12-10 Mintsuki <mintsuki@protonmail.com>
*** Release 6.20231210.0 ***
This is the first release in the 6.x series.
Breaking changes compared to the 5.x series:
- Support for the unmaintained ext2/3/4 filesystems dropped in compliance
with the Limine bootloader design philosophy.
- Chainloading protocol split into 2 protocols: EFI chainloading and BIOS
chainloading.
2023-12-07 Mintsuki <mintsuki@protonmail.com>
*** Release 5.20231207.1 ***
Noteworthy changes compared to the previous release, 5.20231207.0:
Bug fixes:
- multiboot2/elf: Fix issue where ELF vaddrs were taken into account
instead of paddrs when loading executables.
- Fix implementation of a function that detects whether a given memory
range is physical RAM.
2023-12-07 Mintsuki <mintsuki@protonmail.com>
*** Release 5.20231207.0 ***
Noteworthy changes compared to the previous release, 5.20231124.0:
New features:
- multiboot2 protocol: Add support for relocatable header tag.
- multiboot2 protocol: Add support for console flags header tag.
- Limine protocol: Add support for EFI memory map feature.
Miscellaneous:
- Improve error reporting from host "limine" executable.
- Do not ignore errors from mtools when building limine-uefi-cd.bin.
2023-11-24 Mintsuki <mintsuki@protonmail.com>
*** Release 5.20231124.0 ***
Compared to previous release, 5.20231121.0:
New features:
- Add support for rebooting to UEFI firmware setup.
Bug fixes:
- Fix SMP (multiprocessor) initialisation regression on aarch64.
Miscellaneous:
- Move to new, handwritten ChangeLog from autogenerated one.
Reference in New Issue View Git Blame Copy Permalink