Merge tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
 "There are two new drivers and support for more models in existing
  ones.

  The generic GPIO API has been reworked and all users converted
  which allowed us to move the fields specific to the generic GPIO
  implementation out of the high-level struct gpio_chip into its own
  structure that wraps the gpio_chip.

  Other than that, there's nothing too exciting. Mostly minor tweaks and
  fixes all over the place, some refactoring and some small new features
  in helper modules.

  GPIO core:
   - add support for sparse pin ranges to the glue between GPIO and
     pinctrl
   - use a common prefix across all GPIO descriptor flags for improved
     namespacing

  New drivers:
   - add new GPIO driver for the Nuvoton NCT6694
   - add new GPIO driver for MAX7360

  Driver improvements:
   - add support for Tegra 256 to the gpio-tegra186 driver
   - add support for Loongson-2K0300 to the gpio-loongson-64bit driver
   - refactor the gpio-aggregator module to expose its GPIO forwarder
     API to other in-kernel users (to enable merging of a new pinctrl
     driver that uses it)
   - convert all remaining drivers to using the modernized generic GPIO
     chip API and remove the old interface
   - stop displaying global GPIO numbers in debugfs output of controller
     drivers
   - extend the gpio-regmap helper with a new config option and improve
     its support for GPIO interrupts
   - remove redundant fast_io parameter from regmap configs in GPIO
     drivers that already use MMIO regmaps which imply it
   - add support for a new model in gpio-mmio: ixp4xx expansion bus
   - order includes alphabetically in a few drivers for better
     readability
   - use generic device properties where applicable
   - use devm_mutex_init() where applicable
   - extend build coverage of drivers by enabling more to be compiled
     with COMPILE_TEST enabled
   - allow building gpio-stmpe as a module
   - use dev_err_probe() where it makes sense in drivers

  Late driver fixes:
   - fix setting GPIO direction to output in gpio-mpfs

  Documentation:
   - document the usage of software nodes with GPIO chips

  Device-tree bindings:
   - Add DT bindings documents for new hardware: Tegra256, MAX7360
   - Document a new model in Loongson bindings: LS2K0300
   - Document a new model using the generic GPIO binding: IXP4xx
   - Convert the DT binding for fsl,mxs-pinctrl to YAML
   - fix the schema ID in the "trivial" GPIO schema
   - describe GPIO hogs in the generic GPIO binding"

* tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (122 commits)
  gpio: mpfs: fix setting gpio direction to output
  gpio: generic: move GPIO_GENERIC_ flags to the correct header
  gpio: generic: rename BGPIOF_ flags to GPIO_GENERIC_
  gpio: nomadik: fix the debugfs helper stub
  MAINTAINERS: Add entry on MAX7360 driver
  input: misc: Add support for MAX7360 rotary
  input: keyboard: Add support for MAX7360 keypad
  gpio: max7360: Add MAX7360 gpio support
  gpio: regmap: Allow to provide init_valid_mask callback
  gpio: regmap: Allow to allocate regmap-irq device
  pwm: max7360: Add MAX7360 PWM support
  pinctrl: Add MAX7360 pinctrl driver
  mfd: Add max7360 support
  dt-bindings: mfd: gpio: Add MAX7360
  rtc: Add Nuvoton NCT6694 RTC support
  hwmon: Add Nuvoton NCT6694 HWMON support
  watchdog: Add Nuvoton NCT6694 WDT support
  can: Add Nuvoton NCT6694 CANFD support
  i2c: Add Nuvoton NCT6694 I2C support
  gpio: Add Nuvoton NCT6694 GPIO support
  ...

6 files changed, 524 insertions, 0 deletions

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 7c4f309a4cb6..1b10528b7ca3 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -422,6 +422,18 @@ config KEYBOARD_MAX7359
 	  To compile this driver as a module, choose M here: the
 	  module will be called max7359_keypad.
 
+config KEYBOARD_MAX7360
+	tristate "Maxim MAX7360 Key Switch Controller"
+	select INPUT_MATRIXKMAP
+	depends on I2C
+	depends on MFD_MAX7360
+	help
+	  If you say yes here you get support for the keypad controller on the
+	  Maxim MAX7360 I/O Expander.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called max7360_keypad.
+
 config KEYBOARD_MPR121
 	tristate "Freescale MPR121 Touchkey"
 	depends on I2C
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 8bc20ab2b103..636367cd1042 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_KEYBOARD_LPC32XX)		+= lpc32xx-keys.o
 obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
 obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
 obj-$(CONFIG_KEYBOARD_MAX7359)		+= max7359_keypad.o
+obj-$(CONFIG_KEYBOARD_MAX7360)		+= max7360-keypad.o
 obj-$(CONFIG_KEYBOARD_MPR121)		+= mpr121_touchkey.o
 obj-$(CONFIG_KEYBOARD_MT6779)		+= mt6779-keypad.o
 obj-$(CONFIG_KEYBOARD_MTK_PMIC) 	+= mtk-pmic-keys.o
diff --git a/drivers/input/keyboard/max7360-keypad.c b/drivers/input/keyboard/max7360-keypad.c
new file mode 100644
index 000000000000..503be952b0a6
--- /dev/null
+++ b/drivers/input/keyboard/max7360-keypad.c
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2025 Bootlin
+ *
+ * Author: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/dev_printk.h>
+#include <linux/device/devres.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/max7360.h>
+#include <linux/mod_devicetable.h>
+#include <linux/minmax.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/regmap.h>
+
+struct max7360_keypad {
+	struct input_dev *input;
+	unsigned int rows;
+	unsigned int cols;
+	unsigned int debounce_ms;
+	int irq;
+	struct regmap *regmap;
+	unsigned short keycodes[MAX7360_MAX_KEY_ROWS * MAX7360_MAX_KEY_COLS];
+};
+
+static irqreturn_t max7360_keypad_irq(int irq, void *data)
+{
+	struct max7360_keypad *max7360_keypad = data;
+	struct device *dev = max7360_keypad->input->dev.parent;
+	unsigned int val;
+	unsigned int row, col;
+	unsigned int release;
+	unsigned int code;
+	int error;
+
+	error = regmap_read(max7360_keypad->regmap, MAX7360_REG_KEYFIFO, &val);
+	if (error) {
+		dev_err(dev, "Failed to read MAX7360 FIFO");
+		return IRQ_NONE;
+	}
+
+	/* FIFO overflow: ignore it and get next event. */
+	if (val == MAX7360_FIFO_OVERFLOW) {
+		dev_warn(dev, "max7360 FIFO overflow");
+		error = regmap_read_poll_timeout(max7360_keypad->regmap, MAX7360_REG_KEYFIFO,
+						 val, val != MAX7360_FIFO_OVERFLOW, 0, 1000);
+		if (error) {
+			dev_err(dev, "Failed to empty MAX7360 FIFO");
+			return IRQ_NONE;
+		}
+	}
+
+	if (val == MAX7360_FIFO_EMPTY) {
+		dev_dbg(dev, "Got a spurious interrupt");
+
+		return IRQ_NONE;
+	}
+
+	row = FIELD_GET(MAX7360_FIFO_ROW, val);
+	col = FIELD_GET(MAX7360_FIFO_COL, val);
+	release = val & MAX7360_FIFO_RELEASE;
+
+	code = MATRIX_SCAN_CODE(row, col, get_count_order(max7360_keypad->cols));
+
+	dev_dbg(dev, "key[%d:%d] %s\n", row, col, release ? "release" : "press");
+
+	input_event(max7360_keypad->input, EV_MSC, MSC_SCAN, code);
+	input_report_key(max7360_keypad->input, max7360_keypad->keycodes[code], !release);
+	input_sync(max7360_keypad->input);
+
+	return IRQ_HANDLED;
+}
+
+static int max7360_keypad_open(struct input_dev *pdev)
+{
+	struct max7360_keypad *max7360_keypad = input_get_drvdata(pdev);
+	struct device *dev = max7360_keypad->input->dev.parent;
+	int error;
+
+	/* Somebody is using the device: get out of sleep. */
+	error = regmap_write_bits(max7360_keypad->regmap, MAX7360_REG_CONFIG,
+				  MAX7360_CFG_SLEEP, MAX7360_CFG_SLEEP);
+	if (error)
+		dev_err(dev, "Failed to write max7360 configuration: %d\n", error);
+
+	return error;
+}
+
+static void max7360_keypad_close(struct input_dev *pdev)
+{
+	struct max7360_keypad *max7360_keypad = input_get_drvdata(pdev);
+	struct device *dev = max7360_keypad->input->dev.parent;
+	int error;
+
+	/* Nobody is using the device anymore: go to sleep. */
+	error = regmap_write_bits(max7360_keypad->regmap, MAX7360_REG_CONFIG, MAX7360_CFG_SLEEP, 0);
+	if (error)
+		dev_err(dev, "Failed to write max7360 configuration: %d\n", error);
+}
+
+static int max7360_keypad_hw_init(struct max7360_keypad *max7360_keypad)
+{
+	struct device *dev = max7360_keypad->input->dev.parent;
+	unsigned int val;
+	int error;
+
+	val = max7360_keypad->debounce_ms - MAX7360_DEBOUNCE_MIN;
+	error = regmap_write_bits(max7360_keypad->regmap, MAX7360_REG_DEBOUNCE,
+				  MAX7360_DEBOUNCE,
+				  FIELD_PREP(MAX7360_DEBOUNCE, val));
+	if (error)
+		return dev_err_probe(dev, error,
+				     "Failed to write max7360 debounce configuration\n");
+
+	error = regmap_write_bits(max7360_keypad->regmap, MAX7360_REG_INTERRUPT,
+				  MAX7360_INTERRUPT_TIME_MASK,
+				  FIELD_PREP(MAX7360_INTERRUPT_TIME_MASK, 1));
+	if (error)
+		return dev_err_probe(dev, error,
+				     "Failed to write max7360 keypad interrupt configuration\n");
+
+	return 0;
+}
+
+static int max7360_keypad_build_keymap(struct max7360_keypad *max7360_keypad)
+{
+	struct input_dev *input_dev = max7360_keypad->input;
+	struct device *dev = input_dev->dev.parent->parent;
+	struct matrix_keymap_data keymap_data;
+	const char *propname = "linux,keymap";
+	unsigned int max_keys;
+	int error;
+	int size;
+
+	size = device_property_count_u32(dev, propname);
+	if (size <= 0) {
+		dev_err(dev, "missing or malformed property %s: %d\n", propname, size);
+		return size < 0 ? size : -EINVAL;
+	}
+
+	max_keys = max7360_keypad->cols * max7360_keypad->rows;
+	if (size > max_keys) {
+		dev_err(dev, "%s size overflow (%d vs max %u)\n", propname, size, max_keys);
+		return -EINVAL;
+	}
+
+	u32 *keys __free(kfree) = kmalloc_array(size, sizeof(*keys), GFP_KERNEL);
+	if (!keys)
+		return -ENOMEM;
+
+	error = device_property_read_u32_array(dev, propname, keys, size);
+	if (error) {
+		dev_err(dev, "failed to read %s property: %d\n", propname, error);
+		return error;
+	}
+
+	keymap_data.keymap = keys;
+	keymap_data.keymap_size = size;
+	error = matrix_keypad_build_keymap(&keymap_data, NULL,
+					   max7360_keypad->rows, max7360_keypad->cols,
+					   max7360_keypad->keycodes, max7360_keypad->input);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static int max7360_keypad_parse_fw(struct device *dev,
+				   struct max7360_keypad *max7360_keypad,
+				   bool *autorepeat)
+{
+	int error;
+
+	error = matrix_keypad_parse_properties(dev->parent, &max7360_keypad->rows,
+					       &max7360_keypad->cols);
+	if (error)
+		return error;
+
+	if (!max7360_keypad->rows || !max7360_keypad->cols ||
+	    max7360_keypad->rows > MAX7360_MAX_KEY_ROWS ||
+	    max7360_keypad->cols > MAX7360_MAX_KEY_COLS) {
+		dev_err(dev, "Invalid number of columns or rows (%ux%u)\n",
+			max7360_keypad->cols, max7360_keypad->rows);
+		return -EINVAL;
+	}
+
+	*autorepeat = device_property_read_bool(dev->parent, "autorepeat");
+
+	max7360_keypad->debounce_ms = MAX7360_DEBOUNCE_MIN;
+	error = device_property_read_u32(dev->parent, "keypad-debounce-delay-ms",
+					 &max7360_keypad->debounce_ms);
+	if (error == -EINVAL) {
+		dev_info(dev, "Using default keypad-debounce-delay-ms: %u\n",
+			 max7360_keypad->debounce_ms);
+	} else if (error < 0) {
+		dev_err(dev, "Failed to read keypad-debounce-delay-ms property\n");
+		return error;
+	}
+
+	if (!in_range(max7360_keypad->debounce_ms, MAX7360_DEBOUNCE_MIN,
+		      MAX7360_DEBOUNCE_MAX - MAX7360_DEBOUNCE_MIN + 1)) {
+		dev_err(dev, "Invalid keypad-debounce-delay-ms: %u, should be between %u and %u.\n",
+			max7360_keypad->debounce_ms, MAX7360_DEBOUNCE_MIN, MAX7360_DEBOUNCE_MAX);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int max7360_keypad_probe(struct platform_device *pdev)
+{
+	struct max7360_keypad *max7360_keypad;
+	struct device *dev = &pdev->dev;
+	struct input_dev *input;
+	struct regmap *regmap;
+	bool autorepeat;
+	int error;
+	int irq;
+
+	regmap = dev_get_regmap(dev->parent, NULL);
+	if (!regmap)
+		return dev_err_probe(dev, -ENODEV, "Could not get parent regmap\n");
+
+	irq = fwnode_irq_get_byname(dev_fwnode(dev->parent), "intk");
+	if (irq < 0)
+		return dev_err_probe(dev, irq, "Failed to get IRQ\n");
+
+	max7360_keypad = devm_kzalloc(dev, sizeof(*max7360_keypad), GFP_KERNEL);
+	if (!max7360_keypad)
+		return -ENOMEM;
+
+	max7360_keypad->regmap = regmap;
+
+	error = max7360_keypad_parse_fw(dev, max7360_keypad, &autorepeat);
+	if (error)
+		return error;
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+
+	max7360_keypad->input = input;
+
+	input->id.bustype = BUS_I2C;
+	input->name = pdev->name;
+	input->open = max7360_keypad_open;
+	input->close = max7360_keypad_close;
+
+	error = max7360_keypad_build_keymap(max7360_keypad);
+	if (error)
+		return dev_err_probe(dev, error, "Failed to build keymap\n");
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+	if (autorepeat)
+		__set_bit(EV_REP, input->evbit);
+
+	input_set_drvdata(input, max7360_keypad);
+
+	error = devm_request_threaded_irq(dev, irq, NULL, max7360_keypad_irq,
+					  IRQF_ONESHOT,
+					  "max7360-keypad", max7360_keypad);
+	if (error)
+		return dev_err_probe(dev, error, "Failed to register interrupt\n");
+
+	error = input_register_device(input);
+	if (error)
+		return dev_err_probe(dev, error, "Could not register input device\n");
+
+	error = max7360_keypad_hw_init(max7360_keypad);
+	if (error)
+		return dev_err_probe(dev, error, "Failed to initialize max7360 keypad\n");
+
+	device_init_wakeup(dev, true);
+	error = dev_pm_set_wake_irq(dev, irq);
+	if (error)
+		dev_warn(dev, "Failed to set up wakeup irq: %d\n", error);
+
+	return 0;
+}
+
+static void max7360_keypad_remove(struct platform_device *pdev)
+{
+	dev_pm_clear_wake_irq(&pdev->dev);
+	device_init_wakeup(&pdev->dev, false);
+}
+
+static struct platform_driver max7360_keypad_driver = {
+	.driver = {
+		.name	= "max7360-keypad",
+	},
+	.probe		= max7360_keypad_probe,
+	.remove		= max7360_keypad_remove,
+};
+module_platform_driver(max7360_keypad_driver);
+
+MODULE_DESCRIPTION("MAX7360 Keypad driver");
+MODULE_AUTHOR("Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 0fb21c99a5e3..d604aad90a89 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -230,6 +230,16 @@ config INPUT_M68K_BEEP
 	tristate "M68k Beeper support"
 	depends on M68K
 
+config INPUT_MAX7360_ROTARY
+	tristate "Maxim MAX7360 Rotary Encoder"
+	depends on MFD_MAX7360
+	help
+	  If you say yes here you get support for the rotary encoder on the
+	  Maxim MAX7360 I/O Expander.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called max7360_rotary.
+
 config INPUT_MAX77650_ONKEY
 	tristate "Maxim MAX77650 ONKEY support"
 	depends on MFD_MAX77650
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index d468c8140b93..ac45cb9b5c99 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_INPUT_IQS7222)		+= iqs7222.o
 obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
 obj-$(CONFIG_INPUT_KXTJ9)		+= kxtj9.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
+obj-$(CONFIG_INPUT_MAX7360_ROTARY)	+= max7360-rotary.o
 obj-$(CONFIG_INPUT_MAX77650_ONKEY)	+= max77650-onkey.o
 obj-$(CONFIG_INPUT_MAX77693_HAPTIC)	+= max77693-haptic.o
 obj-$(CONFIG_INPUT_MAX8925_ONKEY)	+= max8925_onkey.o
diff --git a/drivers/input/misc/max7360-rotary.c b/drivers/input/misc/max7360-rotary.c
new file mode 100644
index 000000000000..385831ef34b6
--- /dev/null
+++ b/drivers/input/misc/max7360-rotary.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2025 Bootlin
+ *
+ * Author: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/device/devres.h>
+#include <linux/dev_printk.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/max7360.h>
+#include <linux/property.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#define MAX7360_ROTARY_DEFAULT_STEPS 24
+
+struct max7360_rotary {
+	struct input_dev *input;
+	struct regmap *regmap;
+	unsigned int debounce_ms;
+
+	unsigned int pos;
+
+	u32 steps;
+	u32 axis;
+	bool relative_axis;
+	bool rollover;
+};
+
+static void max7360_rotary_report_event(struct max7360_rotary *max7360_rotary, int steps)
+{
+	if (max7360_rotary->relative_axis) {
+		input_report_rel(max7360_rotary->input, max7360_rotary->axis, steps);
+	} else {
+		int pos = max7360_rotary->pos;
+		int maxval = max7360_rotary->steps;
+
+		/*
+		 * Add steps to the position.
+		 * Make sure added steps are always in ]-maxval; maxval[
+		 * interval, so (pos + maxval) is always >= 0.
+		 * Then set back pos to the [0; maxval[ interval.
+		 */
+		pos += steps % maxval;
+		if (max7360_rotary->rollover)
+			pos = (pos + maxval) % maxval;
+		else
+			pos = clamp(pos, 0, maxval - 1);
+
+		max7360_rotary->pos = pos;
+		input_report_abs(max7360_rotary->input, max7360_rotary->axis, max7360_rotary->pos);
+	}
+
+	input_sync(max7360_rotary->input);
+}
+
+static irqreturn_t max7360_rotary_irq(int irq, void *data)
+{
+	struct max7360_rotary *max7360_rotary = data;
+	struct device *dev = max7360_rotary->input->dev.parent;
+	unsigned int val;
+	int error;
+
+	error = regmap_read(max7360_rotary->regmap, MAX7360_REG_RTR_CNT, &val);
+	if (error < 0) {
+		dev_err(dev, "Failed to read rotary counter\n");
+		return IRQ_NONE;
+	}
+
+	if (val == 0)
+		return IRQ_NONE;
+
+	max7360_rotary_report_event(max7360_rotary, sign_extend32(val, 7));
+
+	return IRQ_HANDLED;
+}
+
+static int max7360_rotary_hw_init(struct max7360_rotary *max7360_rotary)
+{
+	struct device *dev = max7360_rotary->input->dev.parent;
+	int val;
+	int error;
+
+	val = FIELD_PREP(MAX7360_ROT_DEBOUNCE, max7360_rotary->debounce_ms) |
+	      FIELD_PREP(MAX7360_ROT_INTCNT, 1) | MAX7360_ROT_INTCNT_DLY;
+	error = regmap_write(max7360_rotary->regmap, MAX7360_REG_RTRCFG, val);
+	if (error)
+		dev_err(dev, "Failed to set max7360 rotary encoder configuration\n");
+
+	return error;
+}
+
+static int max7360_rotary_probe(struct platform_device *pdev)
+{
+	struct max7360_rotary *max7360_rotary;
+	struct device *dev = &pdev->dev;
+	struct input_dev *input;
+	struct regmap *regmap;
+	int irq;
+	int error;
+
+	regmap = dev_get_regmap(dev->parent, NULL);
+	if (!regmap)
+		return dev_err_probe(dev, -ENODEV, "Could not get parent regmap\n");
+
+	irq = fwnode_irq_get_byname(dev_fwnode(dev->parent), "inti");
+	if (irq < 0)
+		return dev_err_probe(dev, irq, "Failed to get IRQ\n");
+
+	max7360_rotary = devm_kzalloc(dev, sizeof(*max7360_rotary), GFP_KERNEL);
+	if (!max7360_rotary)
+		return -ENOMEM;
+
+	max7360_rotary->regmap = regmap;
+
+	device_property_read_u32(dev->parent, "linux,axis", &max7360_rotary->axis);
+	max7360_rotary->rollover = device_property_read_bool(dev->parent,
+							     "rotary-encoder,rollover");
+	max7360_rotary->relative_axis =
+		device_property_read_bool(dev->parent, "rotary-encoder,relative-axis");
+
+	error = device_property_read_u32(dev->parent, "rotary-encoder,steps",
+					 &max7360_rotary->steps);
+	if (error)
+		max7360_rotary->steps = MAX7360_ROTARY_DEFAULT_STEPS;
+
+	device_property_read_u32(dev->parent, "rotary-debounce-delay-ms",
+				 &max7360_rotary->debounce_ms);
+	if (max7360_rotary->debounce_ms > MAX7360_ROT_DEBOUNCE_MAX)
+		return dev_err_probe(dev, -EINVAL, "Invalid debounce timing: %u\n",
+				     max7360_rotary->debounce_ms);
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+
+	max7360_rotary->input = input;
+
+	input->id.bustype = BUS_I2C;
+	input->name = pdev->name;
+
+	if (max7360_rotary->relative_axis)
+		input_set_capability(input, EV_REL, max7360_rotary->axis);
+	else
+		input_set_abs_params(input, max7360_rotary->axis, 0, max7360_rotary->steps, 0, 1);
+
+	error = devm_request_threaded_irq(dev, irq, NULL, max7360_rotary_irq,
+					  IRQF_ONESHOT | IRQF_SHARED,
+					  "max7360-rotary", max7360_rotary);
+	if (error)
+		return dev_err_probe(dev, error, "Failed to register interrupt\n");
+
+	error = input_register_device(input);
+	if (error)
+		return dev_err_probe(dev, error, "Could not register input device\n");
+
+	error = max7360_rotary_hw_init(max7360_rotary);
+	if (error)
+		return dev_err_probe(dev, error, "Failed to initialize max7360 rotary\n");
+
+	device_init_wakeup(dev, true);
+	error = dev_pm_set_wake_irq(dev, irq);
+	if (error)
+		dev_warn(dev, "Failed to set up wakeup irq: %d\n", error);
+
+	return 0;
+}
+
+static void max7360_rotary_remove(struct platform_device *pdev)
+{
+	dev_pm_clear_wake_irq(&pdev->dev);
+	device_init_wakeup(&pdev->dev, false);
+}
+
+static struct platform_driver max7360_rotary_driver = {
+	.driver = {
+		.name	= "max7360-rotary",
+	},
+	.probe		= max7360_rotary_probe,
+	.remove		= max7360_rotary_remove,
+};
+module_platform_driver(max7360_rotary_driver);
+
+MODULE_DESCRIPTION("MAX7360 Rotary driver");
+MODULE_AUTHOR("Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>");
+MODULE_LICENSE("GPL");