watchdog: s3c2410_wdt: Increase max timeout value of watchdog

Increase max_timeout value from 55s to 3665038s (1018h 3min 58s) with
38400000 frequency system if the system has 32-bit WTCNT register.

cat /sys/class/watchdog/watchdog0/max_timeout
3665038

[    0.330082] s3c2410-wdt 10060000.watchdog_cl0: Heartbeat: count=1099511400000, timeout=3665038, freq=300000
[    0.330087] s3c2410-wdt 10060000.watchdog_cl0: Heartbeat: timeout=3665038, divisor=256, count=1099511400000 (fffffc87)
[    0.330127] s3c2410-wdt 10060000.watchdog_cl0: starting watchdog timer
[    0.330134] s3c2410-wdt 10060000.watchdog_cl0: Starting watchdog: count=0xfffffc87, wtcon=0001ff39
[    0.330319] s3c2410-wdt 10060000.watchdog_cl0: watchdog active, reset enabled, irq disabled

If the system has a 32-bit WTCNT, add QUIRK_HAS_32BIT_CNT to its quirk flags,
and it will operate with a 32-bit counter. If not, it will operate with a 16-bit
counter like in the previous version.

Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

1 files changed, 19 insertions, 7 deletions

diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 1e8cf0299713..d983cbcb975c 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -34,7 +34,8 @@
 #define S3C2410_WTCNT		0x08
 #define S3C2410_WTCLRINT	0x0c
 
-#define S3C2410_WTCNT_MAXCNT	0xffff
+#define S3C2410_WTCNT_MAXCNT_16	0xffff
+#define S3C2410_WTCNT_MAXCNT_32	0xffffffff
 
 #define S3C2410_WTCON_RSTEN		BIT(0)
 #define S3C2410_WTCON_INTEN		BIT(2)
@@ -124,6 +125,10 @@
  * %QUIRK_HAS_DBGACK_BIT: WTCON register has DBGACK_MASK bit. Setting the
  * DBGACK_MASK bit disables the watchdog outputs when the SoC is in debug mode.
  * Debug mode is determined by the DBGACK CPU signal.
+ *
+ * %QUIRK_HAS_32BIT_CNT: WTDAT and WTCNT are 32-bit registers. With these
+ * 32-bit registers, larger values will be set, which means that larger timeouts
+ * value can be set.
  */
 #define QUIRK_HAS_WTCLRINT_REG			BIT(0)
 #define QUIRK_HAS_PMU_MASK_RESET		BIT(1)
@@ -131,6 +136,7 @@
 #define QUIRK_HAS_PMU_AUTO_DISABLE		BIT(3)
 #define QUIRK_HAS_PMU_CNT_EN			BIT(4)
 #define QUIRK_HAS_DBGACK_BIT			BIT(5)
+#define QUIRK_HAS_32BIT_CNT			BIT(6)
 
 /* These quirks require that we have a PMU register map */
 #define QUIRKS_HAVE_PMUREG \
@@ -199,6 +205,7 @@ struct s3c2410_wdt {
 	struct notifier_block	freq_transition;
 	const struct s3c2410_wdt_variant *drv_data;
 	struct regmap *pmureg;
+	u32 max_cnt;
 };
 
 static const struct s3c2410_wdt_variant drv_data_s3c2410 = {
@@ -412,7 +419,7 @@ static inline unsigned int s3c2410wdt_max_timeout(struct s3c2410_wdt *wdt)
 {
 	const unsigned long freq = s3c2410wdt_get_freq(wdt);
 	const u64 n_max = (u64)(S3C2410_WTCON_PRESCALE_MAX + 1) *
-			S3C2410_WTCON_MAXDIV * S3C2410_WTCNT_MAXCNT;
+			S3C2410_WTCON_MAXDIV * wdt->max_cnt;
 	u64 t_max = div64_ul(n_max, freq);
 
 	if (t_max > UINT_MAX)
@@ -572,7 +579,7 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd,
 {
 	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
 	unsigned long freq = s3c2410wdt_get_freq(wdt);
-	unsigned int count;
+	unsigned long count;
 	unsigned int divisor = 1;
 	unsigned long wtcon;
 
@@ -582,7 +589,7 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd,
 	freq = DIV_ROUND_UP(freq, 128);
 	count = timeout * freq;
 
-	dev_dbg(wdt->dev, "Heartbeat: count=%d, timeout=%d, freq=%lu\n",
+	dev_dbg(wdt->dev, "Heartbeat: count=%lu, timeout=%d, freq=%lu\n",
 		count, timeout, freq);
 
 	/* if the count is bigger than the watchdog register,
@@ -590,8 +597,8 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd,
 	   actually make this value
 	*/
 
-	if (count >= 0x10000) {
-		divisor = DIV_ROUND_UP(count, 0xffff);
+	if (count > wdt->max_cnt) {
+		divisor = DIV_ROUND_UP(count, wdt->max_cnt);
 
 		if (divisor > S3C2410_WTCON_PRESCALE_MAX + 1) {
 			dev_err(wdt->dev, "timeout %d too big\n", timeout);
@@ -599,7 +606,7 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd,
 		}
 	}
 
-	dev_dbg(wdt->dev, "Heartbeat: timeout=%d, divisor=%d, count=%d (%08x)\n",
+	dev_dbg(wdt->dev, "Heartbeat: timeout=%d, divisor=%d, count=%lu (%08lx)\n",
 		timeout, divisor, count, DIV_ROUND_UP(count, divisor));
 
 	count = DIV_ROUND_UP(count, divisor);
@@ -807,6 +814,11 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(wdt->src_clk))
 		return dev_err_probe(dev, PTR_ERR(wdt->src_clk), "failed to get source clock\n");
 
+	if (wdt->drv_data->quirks & QUIRK_HAS_32BIT_CNT)
+		wdt->max_cnt = S3C2410_WTCNT_MAXCNT_32;
+	else
+		wdt->max_cnt = S3C2410_WTCNT_MAXCNT_16;
+
 	wdt->wdt_device.min_timeout = 1;
 	wdt->wdt_device.max_timeout = s3c2410wdt_max_timeout(wdt);