| Age | Commit message (Collapse) | Author |
|---|
|
KVM fixes for 6.19-rc1
- Add a missing "break" to fix param parsing in the rseq selftest.
- Apply runtime updates to the _current_ CPUID when userspace is setting
CPUID, e.g. as part of vCPU hotplug, to fix a false positive and to avoid
dropping the pending update.
- Disallow toggling KVM_MEM_GUEST_MEMFD on an existing memslot, as it's not
supported by KVM and leads to a use-after-free due to KVM failing to unbind
the memslot from the previously-associated guest_memfd instance.
- Harden against similar KVM_MEM_GUEST_MEMFD goofs, and prepare for supporting
flags-only changes on KVM_MEM_GUEST_MEMFD memlslots, e.g. for dirty logging.
- Set exit_code[63:32] to -1 (all 0xffs) when synthesizing a nested
SVM_EXIT_ERR (a.k.a. VMEXIT_INVALID) #VMEXIT, as VMEXIT_INVALID is defined
as -1ull (a 64-bit value).
- Update SVI when activating APICv to fix a bug where a post-activation EOI
for an in-service IRQ would effective be lost due to SVI being stale.
- Immediately refresh APICv controls (if necessary) on a nested VM-Exit
instead of deferring the update via KVM_REQ_APICV_UPDATE, as the request is
effectively ignored because KVM thinks the vCPU already has the correct
APICv settings.
|
|
Set exit_code_hi to -1u as a temporary band-aid to fix a long-standing
(effectively since KVM's inception) bug where KVM treats the exit code as
a 32-bit value, when in reality it's a 64-bit value. Per the APM, offset
0x70 is a single 64-bit value:
070h 63:0 EXITCODE
And a sane reading of the error values defined in "Table C-1. SVM Intercept
Codes" is that negative values use the full 64 bits:
–1 VMEXIT_INVALID Invalid guest state in VMCB.
–2 VMEXIT_BUSYBUSY bit was set in the VMSA
–3 VMEXIT_IDLE_REQUIREDThe sibling thread is not in an idle state
-4 VMEXIT_INVALID_PMC Invalid PMC state
And that interpretation is confirmed by testing on Milan and Turin (by
setting bits in CR0[63:32] to generate VMEXIT_INVALID on VMRUN).
Furthermore, Xen has treated exitcode as a 64-bit value since HVM support
was adding in 2006 (see Xen commit d1bd157fbc ("Big merge the HVM
full-virtualisation abstractions.")).
Cc: Jim Mattson <jmattson@google.com>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: stable@vger.kernel.org
Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251113225621.1688428-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM SVM changes for 6.19:
- Fix a few missing "VMCB dirty" bugs.
- Fix the worst of KVM's lack of EFER.LMSLE emulation.
- Add AVIC support for addressing 4k vCPUs in x2AVIC mode.
- Fix incorrect handling of selective CR0 writes when checking intercepts
during emulation of L2 instructions.
- Fix a currently-benign bug where KVM would clobber SPEC_CTRL[63:32] on
VMRUN and #VMEXIT.
- Fix a bug where KVM corrupt the guest code stream when re-injecting a soft
interrupt if the guest patched the underlying code after the VM-Exit, e.g.
when Linux patches code with a temporary INT3.
- Add KVM_X86_SNP_POLICY_BITS to advertise supported SNP policy bits to
userspace, and extend KVM "support" to all policy bits that don't require
any actual support from KVM.
|
|
The current scheme for handling LBRV when nested is used is very
complicated, especially when L1 does not enable LBRV (i.e. does not set
LBR_CTL_ENABLE_MASK).
To avoid copying LBRs between VMCB01 and VMCB02 on every nested
transition, the current implementation switches between using VMCB01 or
VMCB02 as the source of truth for the LBRs while L2 is running. If L2
enables LBR, VMCB02 is used as the source of truth. When L2 disables
LBR, the LBRs are copied to VMCB01 and VMCB01 is used as the source of
truth. This introduces significant complexity, and incorrect behavior in
some cases.
For example, on a nested #VMEXIT, the LBRs are only copied from VMCB02
to VMCB01 if LBRV is enabled in VMCB01. This is because L2's writes to
MSR_IA32_DEBUGCTLMSR to enable LBR are intercepted and propagated to
VMCB01 instead of VMCB02. However, LBRV is only enabled in VMCB02 when
L2 is running.
This means that if L2 enables LBR and exits to L1, the LBRs will not be
propagated from VMCB02 to VMCB01, because LBRV is disabled in VMCB01.
There is no meaningful difference in CPUID rate in L2 when copying LBRs
on every nested transition vs. the current approach, so do the simple
and correct thing and always copy LBRs between VMCB01 and VMCB02 on
nested transitions (when LBRV is disabled by L1). Drop the conditional
LBRs copying in __svm_{enable/disable}_lbrv() as it is now unnecessary.
VMCB02 becomes the only source of truth for LBRs when L2 is running,
regardless of LBRV being enabled by L1, drop svm_get_lbr_vmcb() and use
svm->vmcb directly in its place.
Fixes: 1d5a1b5860ed ("KVM: x86: nSVM: correctly virtualize LBR msrs when L2 is running")
Cc: stable@vger.kernel.org
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251108004524.1600006-4-yosry.ahmed@linux.dev
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Both the CRx and DRx cases are doing exactly what the default case is
doing, remove them.
No functional change intended.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251024192918.3191141-2-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Mark the VMCB_NPT bit as dirty in nested_vmcb02_prepare_save()
on every nested VMRUN.
If L1 changes the PAT MSR between two VMRUN instructions on the same
L1 vCPU, the g_pat field in the associated vmcb02 will change, and the
VMCB_NPT clean bit should be cleared.
Fixes: 4bb170a5430b ("KVM: nSVM: do not mark all VMCB02 fields dirty on nested vmexit")
Cc: stable@vger.kernel.org
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250922162935.621409-3-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Mark the VMCB_PERM_MAP bit as dirty in nested_vmcb02_prepare_control()
on every nested VMRUN.
If L1 changes MSR interception (INTERCEPT_MSR_PROT) between two VMRUN
instructions on the same L1 vCPU, the msrpm_base_pa in the associated
vmcb02 will change, and the VMCB_PERM_MAP clean bit should be cleared.
Fixes: 4bb170a5430b ("KVM: nSVM: do not mark all VMCB02 fields dirty on nested vmexit")
Reported-by: Matteo Rizzo <matteorizzo@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250922162935.621409-2-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Transfer the three CET Shadow Stack VMCB fields (S_CET, ISST_ADDR, and
SSP) on VMRUN, #VMEXIT, and loading nested state (saving nested state
simply copies the entire save area). SVM doesn't provide a way to
disallow L1 from enabling Shadow Stacks for L2, i.e. KVM *must* provide
nested support before advertising SHSTK to userspace.
Link: https://lore.kernel.org/r/20250919223258.1604852-37-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Replace kzalloc() followed by copy_from_user() with memdup_user() to
improve and simplify svm_set_nested_state().
Return early if an error occurs instead of trying to allocate memory for
'save' when memory allocation for 'ctl' already failed.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250903002951.118912-1-thorsten.blum@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Allow a guest to read the physical IA32_APERF and IA32_MPERF MSRs
without interception.
The IA32_APERF and IA32_MPERF MSRs are not virtualized. Writes are not
handled at all. The MSR values are not zeroed on vCPU creation, saved
on suspend, or restored on resume. No accommodation is made for
processor migration or for sharing a logical processor with other
tasks. No adjustments are made for non-unit TSC multipliers. The MSRs
do not account for time the same way as the comparable PMU events,
whether the PMU is virtualized by the traditional emulation method or
the new mediated pass-through approach.
Nonetheless, in a properly constrained environment, this capability
can be combined with a guest CPUID table that advertises support for
CPUID.6:ECX.APERFMPERF[bit 0] to induce a Linux guest to report the
effective physical CPU frequency in /proc/cpuinfo. Moreover, there is
no performance cost for this capability.
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250530185239.2335185-3-jmattson@google.com
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20250626001225.744268-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When merging L0 and L1 MSRPMs as part of nested VMRUN emulation, access
the bitmaps using "unsigned long" chunks, i.e. use 8-byte access for
64-bit kernels instead of arbitrarily working on 4-byte chunks.
Opportunistically rename local variables in nested_svm_merge_msrpm() to
more precisely/accurately reflect their purpose ("offset" in particular is
extremely ambiguous).
Link: https://lore.kernel.org/r/20250610225737.156318-30-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Return -EINVAL instead of MSR_INVALID from svm_msrpm_bit_nr() to indicate
that the MSR isn't covered by one of the (currently) three MSRPM ranges,
and delete the MSR_INVALID macro now that all users are gone.
Link: https://lore.kernel.org/r/20250610225737.156318-29-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Access the MSRPM using u32/4-byte chunks (and appropriately adjusted
offsets) only when merging L0 and L1 bitmaps as part of emulating VMRUN.
The only reason to batch accesses to MSRPMs is to avoid the overhead of
uaccess operations (e.g. STAC/CLAC and bounds checks) when reading L1's
bitmap pointed at by vmcb12. For all other uses, either per-bit accesses
are more than fast enough (no uaccess), or KVM is only accessing a single
bit (nested_svm_exit_handled_msr()) and so there's nothing to batch.
In addition to (hopefully) documenting the uniqueness of the merging code,
restricting chunked access to _just_ the merging code will allow for
increasing the chunk size (to unsigned long) with minimal risk.
Link: https://lore.kernel.org/r/20250610225737.156318-28-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Store KVM's MSRPM pointers as "void *" instead of "u32 *" to guard against
directly accessing the bitmaps outside of code that is explicitly written
to access the bitmaps with a specific type.
Opportunistically use svm_vcpu_free_msrpm() in svm_vcpu_free() instead of
open coding an equivalent.
Link: https://lore.kernel.org/r/20250610225737.156318-27-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move svm_msrpm_offset() from svm.c to nested.c now that all usage of the
u32-index offsets is nested virtualization specific.
No functional change intended.
Link: https://lore.kernel.org/r/20250610225737.156318-26-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Don't initialize vmcb02's MSRPM with KVM's set of "always passthrough"
MSRs, as KVM always needs to consult L1's intercepts, i.e. needs to merge
vmcb01 with vmcb12 and write the result to vmcb02. This will eventually
allow for the removal of svm_vcpu_init_msrpm().
Note, the bitmaps are truly initialized by svm_vcpu_alloc_msrpm() (default
to intercepting all MSRs), e.g. if there is a bug lurking elsewhere, the
worst case scenario from dropping the call to svm_vcpu_init_msrpm() should
be that KVM would fail to passthrough MSRs to L2.
Link: https://lore.kernel.org/r/20250610225737.156318-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Don't merge bitmaps on nested VMRUN for MSRs that KVM passes through only
for SEV-ES guests. KVM doesn't support nested virtualization for SEV-ES,
and likely never will.
Link: https://lore.kernel.org/r/20250610225737.156318-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use a dedicated array of MSRPM offsets to merge L0 and L1 bitmaps, i.e. to
merge KVM's vmcb01 bitmap with L1's vmcb12 bitmap. This will eventually
allow for the removal of direct_access_msrs, as the only path where
tracking the offsets is truly justified is the merge for nested SVM, where
merging in chunks is an easy way to batch uaccess reads/writes.
Opportunistically omit the x2APIC MSRs from the merge-specific array
instead of filtering them out at runtime.
Note, disabling interception of DEBUGCTL, XSS, EFER, PAT, GHCB, and
TSC_AUX is mutually exclusive with nested virtualization, as KVM passes
through those MSRs only for SEV-ES guests, and KVM doesn't support nested
virtualization for SEV+ guests. Defer removing those MSRs to a future
cleanup in order to make this refactoring as benign as possible.
Link: https://lore.kernel.org/r/20250610225737.156318-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rename nested_svm_vmrun_msrpm() to nested_svm_merge_msrpm() to better
capture its role, and opportunistically feed it @vcpu instead of @svm, as
grabbing "svm" only to turn around and grab svm->vcpu is rather silly.
No functional change intended.
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20250610225737.156318-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM SVM changes for 6.16:
- Wait for target vCPU to acknowledge KVM_REQ_UPDATE_PROTECTED_GUEST_STATE to
fix a race between AP destroy and VMRUN.
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for the VM.
- Add support for ALLOWED_SEV_FEATURES.
- Add #VMGEXIT to the set of handlers special cased for CONFIG_RETPOLINE=y.
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing features
that utilize those bits.
- Don't account temporary allocations in sev_send_update_data().
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock Threshold.
|
|
Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM CPUs with Bus Lock
Threshold, which is close enough to VMX's Bus Lock Detection VM-Exit to
allow reusing KVM_CAP_X86_BUS_LOCK_EXIT.
The biggest difference between the two features is that Threshold is
fault-like, whereas Detection is trap-like. To allow the guest to make
forward progress, Threshold provides a per-VMCB counter which is
decremented every time a bus lock occurs, and a VM-Exit is triggered if
and only if the counter is '0'.
To provide Detection-like semantics, initialize the counter to '0', i.e.
exit on every bus lock, and when re-executing the guilty instruction, set
the counter to '1' to effectively step past the instruction.
Note, in the unlikely scenario that re-executing the instruction doesn't
trigger a bus lock, e.g. because the guest has changed memory types or
patched the guilty instruction, the bus lock counter will be left at '1',
i.e. the guest will be able to do a bus lock on a different instruction.
In a perfect world, KVM would ensure the counter is '0' if the guest has
made forward progress, e.g. if RIP has changed. But trying to close that
hole would incur non-trivial complexity, for marginal benefit; the intent
of KVM_CAP_X86_BUS_LOCK_EXIT is to allow userspace rate-limit bus locks,
not to allow for precise detection of problematic guest code. And, it's
simply not feasible to fully close the hole, e.g. if an interrupt arrives
before the original instruction can re-execute, the guest could step past
a different bus lock.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Manali Shukla <manali.shukla@amd.com>
Link: https://lore.kernel.org/r/20250502050346.14274-5-manali.shukla@amd.com
[sean: fix typo in comment]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Commit 2e7eab81425a ("KVM: VMX: Execute IBPB on emulated VM-exit when
guest has IBRS") added an IBPB in the emulated VM-exit path on Intel to
properly virtualize IBRS by providing separate predictor modes for L1
and L2.
AMD requires similar handling, except when IbrsSameMode is enumerated by
the host CPU (which is the case on most/all AMD CPUs). With
IbrsSameMode, hardware IBRS is sufficient and no extra handling is
needed from KVM.
Generalize the handling in nested_vmx_vmexit() by moving it into a
generic function, add the AMD handling, and use it in
nested_svm_vmexit() too. The main reason for using a generic function is
to have a single place to park the huge comment about virtualizing IBRS.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250221163352.3818347-4-yosry.ahmed@linux.dev
[sean: use kvm_nested_vmexit_handle_spec_ctrl() for the helper]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM x86 misc changes for 6.15:
- Fix a bug in PIC emulation that caused KVM to emit a spurious KVM_REQ_EVENT.
- Add a helper to consolidate handling of mp_state transitions, and use it to
clear pv_unhalted whenever a vCPU is made RUNNABLE.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction, to
coalesce updates when multiple pieces of vCPU state are changing, e.g. as
part of a nested transition.
- Fix a variety of nested emulation bugs, and add VMX support for synthesizing
nested VM-Exit on interception (instead of injecting #UD into L2).
- Drop "support" for PV Async #PF with proctected guests without SEND_ALWAYS,
as KVM can't get the current CPL.
- Misc cleanups
|
|
Replace all open-coded assignments to vcpu->arch.mp_state with calls
to a new helper, kvm_set_mp_state(), to centralize all changes to
mp_state.
No functional change intended.
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250113200150.487409-2-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When preparing vmcb02 for nested VMRUN (or state restore), "enter" guest
mode prior to initializing the MMU for nested NPT so that guest_mode is
set in the MMU's role. KVM's model is that all L2 MMUs are tagged with
guest_mode, as the behavior of hypervisor MMUs tends to be significantly
different than kernel MMUs.
Practically speaking, the bug is relatively benign, as KVM only directly
queries role.guest_mode in kvm_mmu_free_guest_mode_roots() and
kvm_mmu_page_ad_need_write_protect(), which SVM doesn't use, and in paths
that are optimizations (mmu_page_zap_pte() and
shadow_mmu_try_split_huge_pages()).
And while the role is incorprated into shadow page usage, because nested
NPT requires KVM to be using NPT for L1, reusing shadow pages across L1
and L2 is impossible as L1 MMUs will always have direct=1, while L2 MMUs
will have direct=0.
Hoist the TLB processing and setting of HF_GUEST_MASK to the beginning
of the flow instead of forcing guest_mode in the MMU, as nothing in
nested_vmcb02_prepare_control() between the old and new locations touches
TLB flush requests or HF_GUEST_MASK, i.e. there's no reason to present
inconsistent vCPU state to the MMU.
Fixes: 69cb877487de ("KVM: nSVM: move MMU setup to nested_prepare_vmcb_control")
Cc: stable@vger.kernel.org
Reported-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://lore.kernel.org/r/20250130010825.220346-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
As the first step toward replacing KVM's so-called "governed features"
framework with a more comprehensive, less poorly named implementation,
replace the "kvm_governed_feature" function prefix with "guest_cpu_cap"
and rename guest_can_use() to guest_cpu_cap_has().
The "guest_cpu_cap" naming scheme mirrors that of "kvm_cpu_cap", and
provides a more clear distinction between guest capabilities, which are
KVM controlled (heh, or one might say "governed"), and guest CPUID, which
with few exceptions is fully userspace controlled.
Opportunistically rewrite the comment about XSS passthrough for SEV-ES
guests to avoid referencing so many functions, as such comments are prone
to becoming stale (case in point...).
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-40-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that all kvm_vcpu_{,un}map() users pass "true" for @dirty, have them
pass "true" as a @writable param to kvm_vcpu_map(), and thus create a
read-only mapping when possible.
Note, creating read-only mappings can be theoretically slower, as they
don't play nice with fast GUP due to the need to break CoW before mapping
the underlying PFN. But practically speaking, creating a mapping isn't
a super hot path, and getting a writable mapping for reading is weird and
confusing.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-34-seanjc@google.com>
|
|
Ignore nCR3[4:0] when loading PDPTEs from memory for nested SVM, as bits
4:0 of CR3 are ignored when PAE paging is used, and thus VMRUN doesn't
enforce 32-byte alignment of nCR3.
In the absolute worst case scenario, failure to ignore bits 4:0 can result
in an out-of-bounds read, e.g. if the target page is at the end of a
memslot, and the VMM isn't using guard pages.
Per the APM:
The CR3 register points to the base address of the page-directory-pointer
table. The page-directory-pointer table is aligned on a 32-byte boundary,
with the low 5 address bits 4:0 assumed to be 0.
And the SDM's much more explicit:
4:0 Ignored
Note, KVM gets this right when loading PDPTRs, it's only the nSVM flow
that is broken.
Fixes: e4e517b4be01 ("KVM: MMU: Do not unconditionally read PDPTE from guest memory")
Reported-by: Kirk Swidowski <swidowski@google.com>
Cc: Andy Nguyen <theflow@google.com>
Cc: 3pvd <3pvd@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20241009140838.1036226-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The fixed size temporary variables vmcb_control_area and vmcb_save_area
allocated in svm_set_nested_state() are released when the function exits.
Meanwhile, svm_set_nested_state() also have vcpu mutex held to avoid
massive concurrency allocation, so we don't need to set GFP_KERNEL_ACCOUNT.
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Link: https://lore.kernel.org/r/20240821112737.3649937-1-liuyongqiang13@huawei.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The input parameter 'vcpu' in snp_safe_alloc_page is not used.
Therefore, remove it.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240520120858.13117-2-lirongqing@baidu.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Implement a workaround for an SNP erratum where the CPU will incorrectly
signal an RMP violation #PF if a hugepage (2MB or 1GB) collides with the
RMP entry of a VMCB, VMSA or AVIC backing page.
When SEV-SNP is globally enabled, the CPU marks the VMCB, VMSA, and AVIC
backing pages as "in-use" via a reserved bit in the corresponding RMP
entry after a successful VMRUN. This is done for _all_ VMs, not just
SNP-Active VMs.
If the hypervisor accesses an in-use page through a writable
translation, the CPU will throw an RMP violation #PF. On early SNP
hardware, if an in-use page is 2MB-aligned and software accesses any
part of the associated 2MB region with a hugepage, the CPU will
incorrectly treat the entire 2MB region as in-use and signal a an RMP
violation #PF.
To avoid this, the recommendation is to not use a 2MB-aligned page for
the VMCB, VMSA or AVIC pages. Add a generic allocator that will ensure
that the page returned is not 2MB-aligned and is safe to be used when
SEV-SNP is enabled. Also implement similar handling for the VMCB/VMSA
pages of nested guests.
[ mdr: Squash in nested guest handling from Ashish, commit msg fixups. ]
Reported-by: Alper Gun <alpergun@google.com> # for nested VMSA case
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Marc Orr <marcorr@google.com>
Signed-off-by: Marc Orr <marcorr@google.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20240126041126.1927228-22-michael.roth@amd.com
|
|
KVM SVM changes for 6.8:
- Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM always
flushes on nested transitions, i.e. always satisfies flush requests. This
allows running bleeding edge versions of VMware Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV support.
- Fix a benign NMI virtualization bug where KVM would unnecessarily intercept
IRET when manually injecting an NMI, e.g. when KVM pends an NMI and injects
a second, "simultaneous" NMI.
|
|
KVM x86 support for virtualizing Linear Address Masking (LAM)
Add KVM support for Linear Address Masking (LAM). LAM tweaks the canonicality
checks for most virtual address usage in 64-bit mode, such that only the most
significant bit of the untranslated address bits must match the polarity of the
last translated address bit. This allows software to use ignored, untranslated
address bits for metadata, e.g. to efficiently tag pointers for address
sanitization.
LAM can be enabled separately for user pointers and supervisor pointers, and
for userspace LAM can be select between 48-bit and 57-bit masking
- 48-bit LAM: metadata bits 62:48, i.e. LAM width of 15.
- 57-bit LAM: metadata bits 62:57, i.e. LAM width of 6.
For user pointers, LAM enabling utilizes two previously-reserved high bits from
CR3 (similar to how PCID_NOFLUSH uses bit 63): LAM_U48 and LAM_U57, bits 62 and
61 respectively. Note, if LAM_57 is set, LAM_U48 is ignored, i.e.:
- CR3.LAM_U48=0 && CR3.LAM_U57=0 == LAM disabled for user pointers
- CR3.LAM_U48=1 && CR3.LAM_U57=0 == LAM-48 enabled for user pointers
- CR3.LAM_U48=x && CR3.LAM_U57=1 == LAM-57 enabled for user pointers
For supervisor pointers, LAM is controlled by a single bit, CR4.LAM_SUP, with
the 48-bit versus 57-bit LAM behavior following the current paging mode, i.e.:
- CR4.LAM_SUP=0 && CR4.LA57=x == LAM disabled for supervisor pointers
- CR4.LAM_SUP=1 && CR4.LA57=0 == LAM-48 enabled for supervisor pointers
- CR4.LAM_SUP=1 && CR4.LA57=1 == LAM-57 enabled for supervisor pointers
The modified LAM canonicality checks:
- LAM_S48 : [ 1 ][ metadata ][ 1 ]
63 47
- LAM_U48 : [ 0 ][ metadata ][ 0 ]
63 47
- LAM_S57 : [ 1 ][ metadata ][ 1 ]
63 56
- LAM_U57 + 5-lvl paging : [ 0 ][ metadata ][ 0 ]
63 56
- LAM_U57 + 4-lvl paging : [ 0 ][ metadata ][ 0...0 ]
63 56..47
The bulk of KVM support for LAM is to emulate LAM's modified canonicality
checks. The approach taken by KVM is to "fill" the metadata bits using the
highest bit of the translated address, e.g. for LAM-48, bit 47 is sign-extended
to bits 62:48. The most significant bit, 63, is *not* modified, i.e. its value
from the raw, untagged virtual address is kept for the canonicality check. This
untagging allows
Aside from emulating LAM's canonical checks behavior, LAM has the usual KVM
touchpoints for selectable features: enumeration (CPUID.7.1:EAX.LAM[bit 26],
enabling via CR3 and CR4 bits, etc.
|
|
'struct hv_vmcb_enlightenments' in VMCB only make sense when either
CONFIG_KVM_HYPERV or CONFIG_HYPERV is enabled.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20231205103630.1391318-17-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
As a preparation to making Hyper-V emulation optional, introduce a helper
to handle pending KVM_REQ_HV_TLB_FLUSH requests.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20231205103630.1391318-8-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Revert KVM's made-up consistency check on SVM's TLB control. The APM says
that unsupported encodings are reserved, but the APM doesn't state that
VMRUN checks for a supported encoding. Unless something is called out
in "Canonicalization and Consistency Checks" or listed as MBZ (Must Be
Zero), AMD behavior is typically to let software shoot itself in the foot.
This reverts commit 174a921b6975ef959dd82ee9e8844067a62e3ec1.
Fixes: 174a921b6975 ("nSVM: Check for reserved encodings of TLB_CONTROL in nested VMCB")
Reported-by: Stefan Sterz <s.sterz@proxmox.com>
Closes: https://lkml.kernel.org/r/b9915c9c-4cf6-051a-2d91-44cc6380f455%40proxmox.com
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20231018194104.1896415-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add and use kvm_vcpu_is_legal_cr3() to check CR3's legality to provide
a clear distinction between CR3 and GPA checks. This will allow exempting
bits from kvm_vcpu_is_legal_cr3() without affecting general GPA checks,
e.g. for upcoming features that will use high bits in CR3 for feature
enabling.
No functional change intended.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Link: https://lore.kernel.org/r/20230913124227.12574-7-binbin.wu@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
svm_leave_nested() similar to a nested VM exit, get the vCPU out of nested
mode and thus should end the local inhibition of AVIC on this vCPU.
Failure to do so, can lead to hangs on guest reboot.
Raise the KVM_REQ_APICV_UPDATE request to refresh the AVIC state of the
current vCPU in this case.
Fixes: f44509f849fe ("KVM: x86: SVM: allow AVIC to co-exist with a nested guest running")
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928173354.217464-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Track "virtual GIF exposed to L1" via a governed feature flag instead of
using a dedicated bit/flag in vcpu_svm.
Note, checking KVM's capabilities instead of the "vgif" param means that
the code isn't strictly equivalent, as vgif_enabled could have been set
if nested=false where as that the governed feature cannot. But that's a
glorified nop as the feature/flag is consumed only by paths that are
Link: https://lore.kernel.org/r/20230815203653.519297-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Track "Pause Filtering is exposed to L1" via governed feature flags
instead of using dedicated bits/flags in vcpu_svm.
No functional change intended.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20230815203653.519297-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Track "LBR virtualization exposed to L1" via a governed feature flag
instead of using a dedicated bit/flag in vcpu_svm.
Note, checking KVM's capabilities instead of the "lbrv" param means that
the code isn't strictly equivalent, as lbrv_enabled could have been set
if nested=false where as that the governed feature cannot. But that's a
glorified nop as the feature/flag is consumed only by paths that are
gated by nSVM being enabled.
Link: https://lore.kernel.org/r/20230815203653.519297-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Track "virtual VMSAVE/VMLOAD exposed to L1" via a governed feature flag
instead of using a dedicated bit/flag in vcpu_svm.
Opportunistically add a comment explaining why KVM disallows virtual
VMLOAD/VMSAVE when the vCPU model is Intel.
No functional change intended.
Link: https://lore.kernel.org/r/20230815203653.519297-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Track "TSC scaling exposed to L1" via a governed feature flag instead of
using a dedicated bit/flag in vcpu_svm.
Note, this fixes a benign bug where KVM would mark TSC scaling as exposed
to L1 even if overall nested SVM supported is disabled, i.e. KVM would let
L1 write MSR_AMD64_TSC_RATIO even when KVM didn't advertise TSCRATEMSR
support to userspace.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20230815203653.519297-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Track "NRIPS exposed to L1" via a governed feature flag instead of using
a dedicated bit/flag in vcpu_svm.
No functional change intended.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20230815203653.519297-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop the @offset and @multiplier params from the kvm_x86_ops hooks for
propagating TSC offsets/multipliers into hardware, and instead have the
vendor implementations pull the information directly from the vCPU
structure. The respective vCPU fields _must_ be written at the same
time in order to maintain consistent state, i.e. it's not random luck
that the value passed in by all callers is grabbed from the vCPU.
Explicitly grabbing the value from the vCPU field in SVM's implementation
in particular will allow for additional cleanup without introducing even
more subtle dependencies. Specifically, SVM can skip the WRMSR if guest
state isn't loaded, i.e. svm_prepare_switch_to_guest() will load the
correct value for the vCPU prior to entering the guest.
This also reconciles KVM's handling of related values that are stored in
the vCPU, as svm_write_tsc_offset() already assumes/requires the caller
to have updated l1_tsc_offset.
Link: https://lore.kernel.org/r/20230729011608.1065019-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When emulating nested SVM transitions, use the outer helper for writing
the TSC multiplier for L2. Using the inner helper only for one-off cases,
i.e. for paths where KVM is NOT emulating or modifying vCPU state, will
allow for multiple cleanups:
- Explicitly disabling preemption only in the outer helper
- Getting the multiplier from the vCPU field in the outer helper
- Skipping the WRMSR in the outer helper if guest state isn't loaded
Opportunistically delete an extra newline.
No functional change intended.
Link: https://lore.kernel.org/r/20230729011608.1065019-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When emulating nested VM-Exit, load L1's TSC multiplier if L1's desired
ratio doesn't match the current ratio, not if the ratio L1 is using for
L2 diverges from the default. Functionally, the end result is the same
as KVM will run L2 with L1's multiplier if L2's multiplier is the default,
i.e. checking that L1's multiplier is loaded is equivalent to checking if
L2 has a non-default multiplier.
However, the assertion that TSC scaling is exposed to L1 is flawed, as
userspace can trigger the WARN at will by writing the MSR and then
updating guest CPUID to hide the feature (modifying guest CPUID is
allowed anytime before KVM_RUN). E.g. hacking KVM's state_test
selftest to do
vcpu_set_msr(vcpu, MSR_AMD64_TSC_RATIO, 0);
vcpu_clear_cpuid_feature(vcpu, X86_FEATURE_TSCRATEMSR);
after restoring state in a new VM+vCPU yields an endless supply of:
------------[ cut here ]------------
WARNING: CPU: 10 PID: 206939 at arch/x86/kvm/svm/nested.c:1105
nested_svm_vmexit+0x6af/0x720 [kvm_amd]
Call Trace:
nested_svm_exit_handled+0x102/0x1f0 [kvm_amd]
svm_handle_exit+0xb9/0x180 [kvm_amd]
kvm_arch_vcpu_ioctl_run+0x1eab/0x2570 [kvm]
kvm_vcpu_ioctl+0x4c9/0x5b0 [kvm]
? trace_hardirqs_off+0x4d/0xa0
__se_sys_ioctl+0x7a/0xc0
__x64_sys_ioctl+0x21/0x30
do_syscall_64+0x41/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Unlike the nested VMRUN path, hoisting the svm->tsc_scaling_enabled check
into the if-statement is wrong as KVM needs to ensure L1's multiplier is
loaded in the above scenario. Alternatively, the WARN_ON() could simply
be deleted, but that would make KVM's behavior even more subtle, e.g. it's
not immediately obvious why it's safe to write MSR_AMD64_TSC_RATIO when
checking only tsc_ratio_msr.
Fixes: 5228eb96a487 ("KVM: x86: nSVM: implement nested TSC scaling")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230729011608.1065019-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Check for nested TSC scaling support on nested SVM VMRUN instead of
asserting that TSC scaling is exposed to L1 if L1's MSR_AMD64_TSC_RATIO
has diverged from KVM's default. Userspace can trigger the WARN at will
by writing the MSR and then updating guest CPUID to hide the feature
(modifying guest CPUID is allowed anytime before KVM_RUN). E.g. hacking
KVM's state_test selftest to do
vcpu_set_msr(vcpu, MSR_AMD64_TSC_RATIO, 0);
vcpu_clear_cpuid_feature(vcpu, X86_FEATURE_TSCRATEMSR);
after restoring state in a new VM+vCPU yields an endless supply of:
------------[ cut here ]------------
WARNING: CPU: 164 PID: 62565 at arch/x86/kvm/svm/nested.c:699
nested_vmcb02_prepare_control+0x3d6/0x3f0 [kvm_amd]
Call Trace:
<TASK>
enter_svm_guest_mode+0x114/0x560 [kvm_amd]
nested_svm_vmrun+0x260/0x330 [kvm_amd]
vmrun_interception+0x29/0x30 [kvm_amd]
svm_invoke_exit_handler+0x35/0x100 [kvm_amd]
svm_handle_exit+0xe7/0x180 [kvm_amd]
kvm_arch_vcpu_ioctl_run+0x1eab/0x2570 [kvm]
kvm_vcpu_ioctl+0x4c9/0x5b0 [kvm]
__se_sys_ioctl+0x7a/0xc0
__x64_sys_ioctl+0x21/0x30
do_syscall_64+0x41/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x45ca1b
Note, the nested #VMEXIT path has the same flaw, but needs a different
fix and will be handled separately.
Fixes: 5228eb96a487 ("KVM: x86: nSVM: implement nested TSC scaling")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230729011608.1065019-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Allow L1 to use vNMI to accelerate its injection of NMI to L2 by
propagating vNMI int_ctl bits from/to vmcb12 to/from vmcb02.
To handle both the case where vNMI is enabled for L1 and L2, and where
vNMI is enabled for L1 but _not_ L2, move pending L1 vNMIs to nmi_pending
on nested VM-Entry and raise KVM_REQ_EVENT, i.e. rely on existing code to
route the NMI to the correct domain.
On nested VM-Exit, reverse the process and set/clear V_NMI_PENDING for L1
based one whether nmi_pending is zero or non-zero. There is no need to
consider vmcb02 in this case, as V_NMI_PENDING can be set in vmcb02 if
vNMI is disabled for L2, and if vNMI is enabled for L2, then L1 and L2
have different NMI contexts.
Co-developed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Santosh Shukla <santosh.shukla@amd.com>
Link: https://lore.kernel.org/r/20230227084016.3368-12-santosh.shukla@amd.com
[sean: massage changelog to match the code]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
If L1 doesn't intercept interrupts, then KVM will use vmcb02's V_IRQ
to detect an interrupt window for L1 IRQs. On a subsequent nested
VM-Exit, KVM might need to copy the current V_IRQ from vmcb02 to vmcb01
to continue waiting for an interrupt window, i.e. if there is still a
pending IRQ for L1.
Raise KVM_REQ_EVENT on nested exit if L1 isn't intercepting IRQs to ensure
that KVM will re-enable interrupt window detection if needed.
Note that this is a theoretical bug because KVM already raises
KVM_REQ_EVENT on each nested VM exit, because the nested VM exit resets
RFLAGS and kvm_set_rflags() raises the KVM_REQ_EVENT unconditionally.
Explicitly raise KVM_REQ_EVENT for the interrupt window case to avoid
having an unnecessary dependency on kvm_set_rflags(), and to document
the scenario.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
[santosh: reworded description as per Sean's v2 comment]
Signed-off-by: Santosh Shukla <Santosh.Shukla@amd.com>
Link: https://lore.kernel.org/r/20230227084016.3368-4-santosh.shukla@amd.com
[sean: further massage changelog and comment]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
