| Age | Commit message (Collapse) | Author |
|---|
|
When wbt_enable_default() is moved out of queue freezing in elevator_change(),
it can cause the wbt inflight counter to become negative (-1), leading to hung
tasks in the writeback path. Tasks get stuck in wbt_wait() because the counter
is in an inconsistent state.
The issue occurs because wbt_enable_default() could race with IO submission,
allowing the counter to be decremented before proper initialization. This manifests
as:
rq_wait[0]:
inflight: -1
has_waiters: True
rwb_enabled() checks the state, which can be updated exactly between wbt_wait()
(rq_qos_throttle()) and wbt_track()(rq_qos_track()), then the inflight counter
will become negative.
And results in hung task warnings like:
task:kworker/u24:39 state:D stack:0 pid:14767
Call Trace:
rq_qos_wait+0xb4/0x150
wbt_wait+0xa9/0x100
__rq_qos_throttle+0x24/0x40
blk_mq_submit_bio+0x672/0x7b0
...
Fix this by:
1. Splitting wbt_enable_default() into:
- __wbt_enable_default(): Returns true if wbt_init() should be called
- wbt_enable_default(): Wrapper for existing callers (no init)
- wbt_init_enable_default(): New function that checks and inits WBT
2. Using wbt_init_enable_default() in blk_register_queue() to ensure
proper initialization during queue registration
3. Move wbt_init() out of wbt_enable_default() which is only for enabling
disabled wbt from bfq and iocost, and wbt_init() isn't needed. Then the
original lock warning can be avoided.
4. Removing the ELEVATOR_FLAG_ENABLE_WBT_ON_EXIT flag and its handling
code since it's no longer needed
This ensures WBT is properly initialized before any IO can be submitted,
preventing the counter from going negative.
Cc: Nilay Shroff <nilay@linux.ibm.com>
Cc: Yu Kuai <yukuai@fnnas.com>
Cc: Guangwu Zhang <guazhang@redhat.com>
Fixes: 78c271344b6f ("block: move wbt_enable_default() out of queue freezing from sched ->exit()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The previous patch introduced ->alloc_sched_data and
->free_sched_data methods. This patch builds upon that
by now using these methods during elevator switch and
nr_hw_queue update.
It's also ensured that scheduler-specific data is
allocated and freed through the new callbacks outside
of the ->freeze_lock and ->elevator_lock locking contexts,
thereby preventing any dependency on pcpu_alloc_mutex.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch introduces a new structure, struct elevator_resources, to
group together all elevator-related resources that share the same
lifetime. As a first step, this change moves the elevator tag pointer
from struct elv_change_ctx into the new struct elevator_resources.
Additionally, rename blk_mq_alloc_sched_tags_batch() and
blk_mq_free_sched_tags_batch() to blk_mq_alloc_sched_res_batch() and
blk_mq_free_sched_res_batch(), respectively. Introduce two new wrapper
helpers, blk_mq_alloc_sched_res() and blk_mq_free_sched_res(), around
blk_mq_alloc_sched_tags() and blk_mq_free_sched_tags().
These changes pave the way for consolidating the allocation and freeing
of elevator-specific resources into common helper functions. This
refactoring improves encapsulation and prepares the code for future
extensions, allowing additional elevator-specific data to be added to
struct elevator_resources without cluttering struct elv_change_ctx.
Subsequent patches will extend struct elevator_resources to include
other elevator-related data.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, the nr_hw_queues update path manages two disjoint xarrays —
one for elevator tags and another for elevator type — both used during
elevator switching. Maintaining these two parallel structures for the
same purpose adds unnecessary complexity and potential for mismatched
state.
This patch unifies both xarrays into a single structure, struct
elv_change_ctx, which holds all per-queue elevator change context. A
single xarray, named elv_tbl, now maps each queue (q->id) in a tagset
to its corresponding elv_change_ctx entry, encapsulating the elevator
tags, type and name references.
This unification simplifies the code, improves maintainability, and
clarifies ownership of per-queue elevator state.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This helper only support to allocate the default number of requests,
add a new parameter to support specific number of requests.
Prepare to fix potential deadlock in the case nr_requests grow.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move scheduler tags (sched_tags) allocation and deallocation outside
both the ->elevator_lock and ->freeze_lock when updating nr_hw_queues.
This change breaks the dependency chain from the percpu allocator lock
to the elevator lock, helping to prevent potential deadlocks, as
observed in the reported lockdep splat[1].
This commit introduces batch allocation and deallocation helpers for
sched_tags, which are now used from within __blk_mq_update_nr_hw_queues
routine while iterating through the tagset.
With this change, all sched_tags memory management is handled entirely
outside the ->elevator_lock and the ->freeze_lock context, thereby
eliminating the lock dependency that could otherwise manifest during
nr_hw_queues updates.
[1] https://lore.kernel.org/all/0659ea8d-a463-47c8-9180-43c719e106eb@linux.ibm.com/
Reported-by: Stefan Haberland <sth@linux.ibm.com>
Closes: https://lore.kernel.org/all/0659ea8d-a463-47c8-9180-43c719e106eb@linux.ibm.com/
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250730074614.2537382-4-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Recent lockdep reports [1] have revealed a potential deadlock caused by a
lock dependency between the percpu allocator lock and the elevator lock.
This issue can be avoided by ensuring that the allocation and release of
scheduler tags (sched_tags) are performed outside the elevator lock.
Furthermore, the queue does not need to be remain frozen during these
operations.
To address this, move all sched_tags allocations and deallocations outside
of both the ->elevator_lock and the ->freeze_lock. Since the lifetime of
the elevator queue and its associated sched_tags is closely tied, the
allocated sched_tags are now stored in the elevator queue structure. Then,
during the actual elevator switch (which runs under ->freeze_lock and
->elevator_lock), the pre-allocated sched_tags are assigned to the
appropriate q->hctx. Once the elevator switch is complete and the locks
are released, the old elevator queue and its associated sched_tags are
freed.
This commit specifically addresses the allocation/deallocation of sched_
tags during elevator switching. Note that sched_tags may also be allocated
in other contexts, such as during nr_hw_queues updates. Supporting that
use case will require batch allocation/deallocation, which will be handled
in a follow-up patch.
This restructuring ensures that sched_tags memory management occurs
entirely outside of the ->elevator_lock and ->freeze_lock context,
eliminating the lock dependency problem seen during scheduler updates.
[1] https://lore.kernel.org/all/0659ea8d-a463-47c8-9180-43c719e106eb@linux.ibm.com/
Reported-by: Stefan Haberland <sth@linux.ibm.com>
Closes: https://lore.kernel.org/all/0659ea8d-a463-47c8-9180-43c719e106eb@linux.ibm.com/
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250730074614.2537382-3-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for allocating sched_tags before freezing the request
queue and acquiring ->elevator_lock, move the elevator queue allocation
logic from the elevator ops ->init_sched callback into blk_mq_init_sched.
As elevator_alloc is now only invoked from block layer core, we don't
need to export it, so unexport elevator_alloc function.
This refactoring provides a centralized location for elevator queue
initialization, which makes it easier to store pre-allocated sched_tags
in the struct elevator_queue during later changes.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250730074614.2537382-2-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block updates from Jens Axboe:
- MD pull request via Yu:
- call del_gendisk synchronously (Xiao)
- cleanup unused variable (John)
- cleanup workqueue flags (Ryo)
- fix faulty rdev can't be removed during resync (Qixing)
- NVMe pull request via Christoph:
- try PCIe function level reset on init failure (Keith Busch)
- log TLS handshake failures at error level (Maurizio Lombardi)
- pci-epf: do not complete commands twice if nvmet_req_init()
fails (Rick Wertenbroek)
- misc cleanups (Alok Tiwari)
- Removal of the pktcdvd driver
This has been more than a decade coming at this point, and some
recently revealed breakages that had it causing issues even for cases
where it isn't required made me re-pull the trigger on this one. It's
known broken and nobody has stepped up to maintain the code
- Series for ublk supporting batch commands, enabling the use of
multishot where appropriate
- Speed up ublk exit handling
- Fix for the two-stage elevator fixing which could leak data
- Convert NVMe to use the new IOVA based API
- Increase default max transfer size to something more reasonable
- Series fixing write operations on zoned DM devices
- Add tracepoints for zoned block device operations
- Prep series working towards improving blk-mq queue management in the
presence of isolated CPUs
- Don't allow updating of the block size of a loop device that is
currently under exclusively ownership/open
- Set chunk sectors from stacked device stripe size and use it for the
atomic write size limit
- Switch to folios in bcache read_super()
- Fix for CD-ROM MRW exit flush handling
- Various tweaks, fixes, and cleanups
* tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux: (94 commits)
block: restore two stage elevator switch while running nr_hw_queue update
cdrom: Call cdrom_mrw_exit from cdrom_release function
sunvdc: Balance device refcount in vdc_port_mpgroup_check
nvme-pci: try function level reset on init failure
dm: split write BIOs on zone boundaries when zone append is not emulated
block: use chunk_sectors when evaluating stacked atomic write limits
dm-stripe: limit chunk_sectors to the stripe size
md/raid10: set chunk_sectors limit
md/raid0: set chunk_sectors limit
block: sanitize chunk_sectors for atomic write limits
ilog2: add max_pow_of_two_factor()
nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails
nvme-tcp: log TLS handshake failures at error level
docs: nvme: fix grammar in nvme-pci-endpoint-target.rst
nvme: fix typo in status code constant for self-test in progress
nvmet: remove redundant assignment of error code in nvmet_ns_enable()
nvme: fix incorrect variable in io cqes error message
nvme: fix multiple spelling and grammar issues in host drivers
block: fix blk_zone_append_update_request_bio() kernel-doc
md/raid10: fix set but not used variable in sync_request_write()
...
|
|
The kmemleak reports memory leaks related to elevator resources that
were originally allocated in the ->init_hctx() method. The following
leak traces are observed after running blktests block/040:
unreferenced object 0xffff8881b82f7400 (size 512):
comm "check", pid 68454, jiffies 4310588881
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 5bac8b34):
__kvmalloc_node_noprof+0x55d/0x7a0
sbitmap_init_node+0x15a/0x6a0
kyber_init_hctx+0x316/0xb90
blk_mq_init_sched+0x419/0x580
elevator_switch+0x18b/0x630
elv_update_nr_hw_queues+0x219/0x2c0
__blk_mq_update_nr_hw_queues+0x36a/0x6f0
blk_mq_update_nr_hw_queues+0x3a/0x60
0xffffffffc09ceb80
0xffffffffc09d7e0b
configfs_write_iter+0x2b1/0x470
vfs_write+0x527/0xe70
ksys_write+0xff/0x200
do_syscall_64+0x98/0x3c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
unreferenced object 0xffff8881b82f6000 (size 512):
comm "check", pid 68454, jiffies 4310588881
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 5bac8b34):
__kvmalloc_node_noprof+0x55d/0x7a0
sbitmap_init_node+0x15a/0x6a0
kyber_init_hctx+0x316/0xb90
blk_mq_init_sched+0x419/0x580
elevator_switch+0x18b/0x630
elv_update_nr_hw_queues+0x219/0x2c0
__blk_mq_update_nr_hw_queues+0x36a/0x6f0
blk_mq_update_nr_hw_queues+0x3a/0x60
0xffffffffc09ceb80
0xffffffffc09d7e0b
configfs_write_iter+0x2b1/0x470
vfs_write+0x527/0xe70
ksys_write+0xff/0x200
do_syscall_64+0x98/0x3c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
unreferenced object 0xffff8881b82f5800 (size 512):
comm "check", pid 68454, jiffies 4310588881
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 5bac8b34):
__kvmalloc_node_noprof+0x55d/0x7a0
sbitmap_init_node+0x15a/0x6a0
kyber_init_hctx+0x316/0xb90
blk_mq_init_sched+0x419/0x580
elevator_switch+0x18b/0x630
elv_update_nr_hw_queues+0x219/0x2c0
__blk_mq_update_nr_hw_queues+0x36a/0x6f0
blk_mq_update_nr_hw_queues+0x3a/0x60
0xffffffffc09ceb80
0xffffffffc09d7e0b
configfs_write_iter+0x2b1/0x470
vfs_write+0x527/0xe70
ksys_write+0xff/0x200
do_syscall_64+0x98/0x3c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The issue arises while we run nr_hw_queue update, Specifically, we first
reallocate hardware contexts (hctx) via __blk_mq_realloc_hw_ctxs(), and
then later invoke elevator_switch() (assuming q->elevator is not NULL).
The elevator switch code would first exit old elevator (elevator_exit)
and then switches to the new elevator. The elevator_exit loops through
each hctx and invokes the elevator’s per-hctx exit method ->exit_hctx(),
which releases resources allocated during ->init_hctx().
This memleak manifests when we reduce the num of h/w queues - for example,
when the initial update sets the number of queues to X, and a later update
reduces it to Y, where Y < X. In this case, we'd loose the access to old
hctxs while we get to elevator exit code because __blk_mq_realloc_hw_ctxs
would have already released the old hctxs. As we don't now have any
reference left to the old hctxs, we don't have any way to free the
scheduler resources (which are allocate in ->init_hctx()) and kmemleak
complains about it.
This issue was caused due to the commit 596dce110b7d ("block: simplify
elevator reattachment for updating nr_hw_queues"). That change unified
the two-stage elevator teardown and reattachment into a single call that
occurs after __blk_mq_realloc_hw_ctxs() has already freed the hctxs.
This patch restores the previous two-stage elevator switch logic during
nr_hw_queues updates. First, the elevator is switched to 'none', which
ensures all scheduler resources are properly freed. Then, the hardware
contexts (hctxs) are reallocated, and the software-to-hardware queue
mappings are updated. Finally, the original elevator is reattached. This
sequence prevents loss of references to old hctxs and avoids the scheduler
resource leaks reported by kmemleak.
Reported-by : Yi Zhang <yi.zhang@redhat.com>
Fixes: 596dce110b7d ("block: simplify elevator reattachment for updating nr_hw_queues")
Closes: https://lore.kernel.org/all/CAHj4cs8oJFvz=daCvjHM5dYCNQH4UXwSySPPU4v-WHce_kZXZA@mail.gmail.com/
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250724102540.1366308-1-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
During probe, when the block layer registers a request queue, it
defaults to the mq-deadline I/O scheduler if the device is single-queue
and the mq-deadline module is available. To determine availability, the
elevator_set_default() invokes elevator_find_get(), which increments the
module's reference count. However, this reference is never released,
resulting in a module reference leak that prevents the mq-deadline module
from being unloaded.
This patch fixes the issue by ensuring the acquired module reference is
properly released.
Fixes: 1e44bedbc921 ("block: unifying elevator change")
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250719132722.769536-1-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When nr_hw_queues is updated, the elevator needs to be switched to
ensure that we exit elevator and reattach it to ensure that hctx->
sched_tags is correctly allocated for the new hardware queues.
However, elv_update_nr_hw_queues() currently only switches the
elevator if the queue is not registered. This is incorrect, as it
prevents reattaching the elevator after updating nr_hw_queues, which
in turn inhibits allocation of sched_tags.
Fix this by allowing the elevator switch if the queue is registered,
ensuring proper reattachment and resource allocation.
Fixes: 596dce110b7d ("block: simplify elevator reattachment for updating nr_hw_queues")
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250515134511.548270-1-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
scheduler's ->exit() is called with queue frozen and elevator lock is held, and
wbt_enable_default() can't be called with queue frozen, otherwise the
following lockdep warning is triggered:
#6 (&q->rq_qos_mutex){+.+.}-{4:4}:
#5 (&eq->sysfs_lock){+.+.}-{4:4}:
#4 (&q->elevator_lock){+.+.}-{4:4}:
#3 (&q->q_usage_counter(io)#3){++++}-{0:0}:
#2 (fs_reclaim){+.+.}-{0:0}:
#1 (&sb->s_type->i_mutex_key#3){+.+.}-{4:4}:
#0 (&q->debugfs_mutex){+.+.}-{4:4}:
Fix the issue by moving wbt_enable_default() out of bfq's exit(), and
call it from elevator_change_done().
Meantime add disk->rqos_state_mutex for covering wbt state change, which
matches the purpose more than ->elevator_lock.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250505141805.2751237-26-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move elv_register[unregister]_queue out of ->elevator_lock & queue freezing,
so we can kill many lockdep warnings.
elv_register[unregister]_queue() is serialized, and just dealing with sysfs/
debugfs things, no need to be done with queue frozen:
- when it is called from adding disk, elevator switch isn't possible
because ->queue_kobj isn't added yet
- when it is called from deleting disk, disable_elv_switch() is
responsible for preventing new elevator switch and draining old
elevator switch.
- when it is called from blk_mq_update_nr_hw_queues(), adding/removing
disk and elevator switch can't be allowed or in-progress
With this change, elevator's ->exit() is called before calling
elv_unregister_queue, then user may call into ->show()/store() of elevator's
sysfs attributes, and we have covered this issue by adding `ELEVATOR_FLAG_DYNG`.
For blk-mq debugfs, hctx->sched_tags is always checked with ->elevator_lock by
debugfs code, meantime hctx->sched_tags is updated with ->elevator_lock, so
there isn't such issue.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250505141805.2751237-22-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add new helper disable_elv_switch() and new flag QUEUE_FLAG_NO_ELV_SWITCH
for disabling elevator switch before deleting disk:
- originally flag QUEUE_FLAG_REGISTERED is added for preventing elevator
switch during removing disk, but this flag has been used widely for
other purposes, so add one new flag for disabling elevator switch only
- for avoiding deadlock risk, we have to move elevator queue
register/unregister out of elevator lock and queue freeze, which will be
done in next patch. However, this way adds small race window between elevator
switch and deleting ->queue_kobj, in which elevator queue register/unregister
could be run concurrently. The added helper will be used for avoiding the race
in the following patch.
- drain in-progress elevator switch before deleting disk
Suggested-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-21-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Prepare for moving elv_register[unregister]_queue out of elevator_lock
& queue freezing, so we may have to call elv_unregister_queue() after
elevator ->exit() is called, then there is small window for user to
call into ->show()/store(), and user-after-free can be caused.
Fail to show/store elevator sysfs attribute if elevator is dying by
adding one new flag of ELEVATOR_FLAG_DYNG, which is protected by
elevator ->sysfs_lock.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250505141805.2751237-20-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
elevatore queue's type is assigned since its allocation, and never
get cleared until it is released.
So its ->type is always not NULL, remove the unnecessary check.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-19-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass elevator_queue reference to elv_register_queue() & elv_unregister_queue().
No functional change, and prepare for moving the two out of elevator
lock & freezing queue, when we need to store the old & new elevator
queue in `struct elv_change_ctx` instance, then both two can co-exist
for short while, so we have to pass the exact elevator_queue instance
to elv_register_queue & unregister_queue.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-18-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Elevator change is one well-define behavior:
- tear down current elevator if it exists
- setup new elevator
It is supposed to cover any case for changing elevator by single
internal API, typically the following cases:
- setup default elevator in add_disk()
- switch to none in del_disk()
- reset elevator in blk_mq_update_nr_hw_queues()
- switch elevator in sysfs `store` elevator attribute
This patch uses elevator_change() to cover all above cases:
- every elevator switch is serialized with each other: add_disk/del_disk/
store elevator is serialized already, blk_mq_update_nr_hw_queues() uses
srcu for syncing with the other three cases
- for both add_disk()/del_disk(), queue freeze works at atomic mode
or has been froze, so the freeze in elevator_change() won't add extra
delay
- `struct elev_change_ctx` instance holds any info for changing elevator
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-17-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add `struct elv_change_ctx` and prepare for unifying elevator change by
elevator_change(). With this way, any input & output parameter can
be provided & observed in top helper.
This way helps to move kobject add/delete & debugfs register/unregister
out of ->elevator_lock & freezing queue.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250505141805.2751237-16-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move queue freezing & elevator_lock into elevator_change(), and prepare
for using elevator_change() for setting up & tearing down default elevator
too.
Also add lockdep_assert_held() in __elevator_change() because either
read or write lock is required for changing elevator.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-15-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In blk_mq_update_nr_hw_queues(), nr_hw_queues changes and elevator data
depends on it, and elevator has to be reattached, so call elevator_switch()
to force attachment.
Add elv_update_nr_hw_queues() simply for blk_mq_update_nr_hw_queues() to
reattach elevator, since elevator switch isn't likely when running
blk_mq_update_nr_hw_queues(). This way removes the current switch
none and switch back code.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-14-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move blk_queue_registered() check into elv_iosched_store() and prepare
for using elevator_change() for covering any kind of elevator change in
adding/deleting disk and updating nr_hw_queue.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250505141805.2751237-13-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This removes duplicate code, and keeps the callers tidy.
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-12-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
That makes the function nicely self-contained and can be used
to avoid code duplication.
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-11-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Elevator switch code is another `nr_hw_queue` reader in non-fast-IO code
path, so it can't be done if updating `nr_hw_queues` is in-progress.
Take same approach with not allowing add/del disk when updating
nr_hw_queues is in-progress, by grabbing read lock of
set->update_nr_hwq_sema.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/linux-block/aAWv3NPtNIKKvJZc@fedora/ [1]
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/linux-block/mz4t4tlwiqjijw3zvqnjb7ovvvaegkqganegmmlc567tt5xj67@xal5ro544cnc/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250505141805.2751237-10-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
sched debugfs shares same lifetime with scheduler's kobject, and same
lock(elevator lock), so move sched debugfs register/unregister into
elevator_register_queue() and elevator_unregister_queue().
Then we needn't blk_mq_debugfs_register() for us to register sched
debugfs any more.
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use q->elevator with ->elevator_lock held in elv_iosched_show(), since
the local cached elevator reference may become stale after getting
->elevator_lock.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Both elevator_switch() and elevator_disable() are only called from the
two code paths, in which queue is guaranteed to be frozen.
So don't call freeze queue in the two functions, also add asserts for
queue freeze.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A queue's elevator can be updated either when modifying nr_hw_queues
or through the sysfs scheduler attribute. Currently, elevator switching/
updating is protected using q->sysfs_lock, but this has led to lockdep
splats[1] due to inconsistent lock ordering between q->sysfs_lock and
the freeze-lock in multiple block layer call sites.
As the scope of q->sysfs_lock is not well-defined, its (mis)use has
resulted in numerous lockdep warnings. To address this, introduce a new
q->elevator_lock, dedicated specifically for protecting elevator
switches/updates. And we'd now use this new q->elevator_lock instead of
q->sysfs_lock for protecting elevator switches/updates.
While at it, make elv_iosched_load_module() a static function, as it is
only called from elv_iosched_store(). Also, remove redundant parameters
from elv_iosched_load_module() function signature.
[1] https://lore.kernel.org/all/67637e70.050a0220.3157ee.000c.GAE@google.com/
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250304102551.2533767-5-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation to further simplify and group sysfs attributes which
don't require locking or require some form of locking other than q->
limits_lock, move acquire/release of q->sysfs_lock and queue freeze/
unfreeze under each attributes' respective show/store method.
While we are at it, also remove ->load_module() as it's used to load
the module before queue is freezed. Now as we moved queue-freeze under
->store(), we could load module directly from the attributes' store
method before we actually start freezing the queue. Currently, the
->load_module() is only used by "scheduler" attribute, so we now load
the relevant elevator module before we start freezing the queue in
elv_iosched_store().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250304102551.2533767-3-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When block drivers or the core block code perform allocations with a
frozen queue, this could try to recurse into the block device to
reclaim memory and deadlock. Thus all allocations done by a process
that froze a queue need to be done without __GFP_IO and __GFP_FS.
Instead of tying to track all of them down, force a noio scope as
part of freezing the queue.
Note that nvme is a bit of a mess here due to the non-owner freezes,
and they will be addressed separately.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250131120352.1315351-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The only queues that really can't support a scheduler are those that
do not have a gendisk associated with them, and thus can't be used for
non-passthrough commands. In addition to those null_blk can optionally
set the flag, which is a bad odd. Replace the null_blk usage with
BLK_MQ_F_NO_SCHED_BY_DEFAULT to keep the expected semantics and then
remove BLK_MQ_F_NO_SCHED as the non-disk queues never call into
elevator_init_mq or blk_register_queue which adds the sysfs attributes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250106083531.799976-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The elevator core does not need to modify the sysfs attributes added by
the elevators. Reflect this in the types, so the attributes can be moved
into read-only memory.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250102-sysfs-const-attr-elevator-v1-1-9837d2058c60@weissschuh.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now blk_freeze_queue_start() can track disk state automatically, and
it isn't necessary to verify queue freeze manually in elevator_init_mq()
any more.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241127135133.3952153-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now we only verify the outmost freeze & unfreeze in current context in case
that !q->mq_freeze_depth, so it is reliable to save disk DEAD state when
we want to lock the freeze queue since the state is one per-task variable
now.
Doing this way can kill lots of false positive when freeze queue is
called before adding disk[1].
[1] https://lore.kernel.org/linux-block/6741f6b2.050a0220.1cc393.0017.GAE@google.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241127135133.3952153-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
elevator_init_mq() is only called at the entry of add_disk_fwnode() when
disk IO isn't allowed yet.
So not verify io lock(q->io_lockdep_map) for freeze & unfreeze in
elevator_init_mq().
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Lai Yi <yi1.lai@linux.intel.com>
Fixes: f1be1788a32e ("block: model freeze & enter queue as lock for supporting lockdep")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241031133723.303835-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Requesting a module either succeeds or does nothing, return an error from
this method does not make sense.
Also move the load_module after the store method in the struct
declaration to keep the important show and store methods together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20241008050841.104602-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit e4eb37cc0f3ed ("block: Remove elevator required features")
removed the usage of `struct request_queue` from elevator_find_get(),
but didn't removed the argument.
Remove the "struct request_queue *q" argument from elevator_find_get()
given it is useless.
Fixes: e4eb37cc0f3e ("block: Remove elevator required features")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20241011155615.3361143-1-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Whenever an I/O elevator is changed, the system attempts to load a
module for the new elevator. This occurs regardless of whether the
elevator is already loaded or built directly into the kernel. This
behavior introduces unnecessary overhead and potential issues.
This makes the operation slower, and more error-prone. For instance,
making the problem fixed by [1] visible for users that doesn't even rely
on modules being available through modules.
Do not try to load the ioscheduler if it is already visible.
This change brings two main benefits: it improves the performance of
elevator changes, and it reduces the likelihood of errors occurring
during this process.
[1] Commit e3accac1a976 ("block: Fix elv_iosched_local_module handling of "none" scheduler")
Fixes: 734e1a860312 ("block: Prevent deadlocks when switching elevators")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20241011170122.3880087-1-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
elevator_get_default() and elv_support_iosched() both check for whether
or not q->tag_set is non-NULL, however it's not possible for them to be
NULL. This messes up some static checkers, as the checking of tag_set
isn't consistent.
Remove the checks, which both simplifies the logic and avoids checker
errors.
Signed-off-by: SurajSonawane2415 <surajsonawane0215@gmail.com>
Link: https://lore.kernel.org/r/20241007111416.13814-1-surajsonawane0215@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 734e1a860312 ("block: Prevent deadlocks when switching
elevators") introduced the function elv_iosched_load_module() to allow
loading an elevator module outside of elv_iosched_store() with the
target device queue not frozen, to avoid deadlocks. However, the "none"
scheduler does not have a module and as a result,
elv_iosched_load_module() always returns an error when trying to switch
to this valid scheduler.
Fix this by ignoring the return value of the request_module() call
done by elv_iosched_load_module(). This restores the behavior before
commit 734e1a860312, which was to ignore the request_module() result and
instead rely on elevator_change() to handle the "none" scheduler case.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 734e1a860312 ("block: Prevent deadlocks when switching elevators")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240917133231.134806-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit af2814149883 ("block: freeze the queue in queue_attr_store")
changed queue_attr_store() to always freeze a sysfs attribute queue
before calling the attribute store() method, to ensure that no IOs are
in-flight when an attribute value is being updated.
However, this change created a potential deadlock situation for the
scheduler queue attribute as changing the queue elevator with
elv_iosched_store() can result in a call to request_module() if the user
requested module is not already registered. If the file of the requested
module is stored on the block device of the frozen queue, a deadlock
will happen as the read operations triggered by request_module() will
wait for the queue freeze to end.
Solve this issue by introducing the load_module method in struct
queue_sysfs_entry, and to calling this method function in
queue_attr_store() before freezing the attribute queue.
The macro definition QUEUE_RW_LOAD_MODULE_ENTRY() is added to define a
queue sysfs attribute that needs loading a module.
The definition of the scheduler atrribute is changed to using
QUEUE_RW_LOAD_MODULE_ENTRY(), with the function
elv_iosched_load_module() defined as the load_module method.
elv_iosched_store() can then be simplified to remove the call to
request_module().
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Reported-by: Jiri Jaburek <jjaburek@redhat.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219166
Fixes: af2814149883 ("block: freeze the queue in queue_attr_store")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Link: https://lore.kernel.org/r/20240908000704.414538-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The kobject for the queue entries is embedded into a struct gendisk.
Pass it to the sysfs methods instead of the request_queue derived from
it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240627111407.476276-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The only elevator feature ever implemented is ELEVATOR_F_ZBD_SEQ_WRITE
for signaling that a scheduler implements zone write locking to tightly
control the dispatching order of write operations to zoned block
devices. With the removal of zone write locking support in mq-deadline
and the reliance of all block device drivers on the block layer zone
write plugging to control ordering of write operations to zones, the
elevator feature ELEVATOR_F_ZBD_SEQ_WRITE is completely unused.
Remove it, and also remove the now unused code for filtering the
possible schedulers for a block device based on required features.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-23-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Chuck reported [1] an IO hang problem on NFS exports that reside on SATA
devices and bisected to commit 615939a2ae73 ("blk-mq: defer to the normal
submission path for post-flush requests").
We analysed the IO hang problem, found there are two postflush requests
waiting for each other.
The first postflush request completed the REQ_FSEQ_DATA sequence, so go to
the REQ_FSEQ_POSTFLUSH sequence and added in the flush pending list, but
failed to blk_kick_flush() because of the second postflush request which
is inflight waiting in scheduler queue.
The second postflush waiting in scheduler queue can't be dispatched because
the first postflush hasn't released scheduler resource even though it has
completed by itself.
Fix it by releasing scheduler resource when the first postflush request
completed, so the second postflush can be dispatched and completed, then
make blk_kick_flush() succeed.
While at it, remove the check for e->ops.finish_request, as all
schedulers set that. Reaffirm this requirement by adding a WARN_ON_ONCE()
at scheduler registration time, just like we do for insert_requests and
dispatch_request.
[1] https://lore.kernel.org/all/7A57C7AE-A51A-4254-888B-FE15CA21F9E9@oracle.com/
Link: https://lore.kernel.org/linux-block/20230819031206.2744005-1-chengming.zhou@linux.dev/
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202308172100.8ce4b853-oliver.sang@intel.com
Fixes: 615939a2ae73 ("blk-mq: defer to the normal submission path for post-flush requests")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20230813152325.3017343-1-chengming.zhou@linux.dev
[axboe: folded in incremental fix and added tags]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230530155608.272266-1-azeemshaikh38@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230208-kobj_type-block-v1-1-0b3eafd7d983@weissschuh.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The kobject embedded into the request_queue is used for the queue
directory in sysfs, but that is a child of the gendisks directory and is
intimately tied to it. Move this kobject to the gendisk and use a
refcount_t in the request_queue for the actual request_queue refcounting
that is completely unrelated to the device model.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221114042637.1009333-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We have bool type now, update the old signature.
Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/0db0a0298758d60d0f4df8b7126ac6a381e5a5bb.1669736350.git.nickyc975@zju.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
