| Age | Commit message (Collapse) | Author |
|---|
|
Enable QoS configuration for master ports with predefined values for
priority and urgency forwarding.
While this does require some "clocks" to be specified in devicetree to
work correctly, thanks to ".qos_requires_clocks = true," this is
backwards compatible with old DT as QoS programming will be skipped for
aggre1_noc and aggre2_noc when clocks are not provided.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20251114-sm6350-icc-qos-v2-4-6af348cb9c69@fairphone.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Clean up the code by removing empty BCM arrays to save some lines.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20251114-sm6350-icc-qos-v2-3-6af348cb9c69@fairphone.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Since commit 57eb14779dfd ("interconnect: qcom: icc-rpmh: Support child
NoC device probe") the icc-rpmh driver supports initializing child NoCs,
but those child NoCs also need to be able to get the parent's regmap in
order to enable QoS.
Change the driver to support that and support programming QoS register.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251114-sm6350-icc-qos-v2-2-6af348cb9c69@fairphone.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Currently most of Qualcomm interconnect drivers use static IDs, which
poses a threat of possible conflicts with other drivers. Rework RPMh
interconnect drivers to use dynamic IDs and drop static IDs
code.
* icc-dynamic-ids
interconnect: qcom: icc-rpmh: convert link_nodes to dynamic array
interconnect: qcom: sc7280: convert to dynamic IDs
interconnect: qcom: sc8180x: convert to dynamic IDs
interconnect: qcom: sc8280xp: convert to dynamic IDs
interconnect: qcom: sdm845: convert to dynamic IDs
interconnect: qcom: sm8250: convert to dynamic IDs
interconnect: qcom: x1e80100: convert to dynamic IDs
interconnect: qcom: qcs615: convert to dynamic IDs
interconnect: qcom: qcs8300: convert to dynamic IDs
interconnect: qcom: qdu1000: convert to dynamic IDs
interconnect: qcom: sar2130p: convert to dynamic IDs
interconnect: qcom: sc7180: convert to dynamic IDs
interconnect: qcom: sdm670: convert to dynamic IDs
interconnect: qcom: sdx55: convert to dynamic IDs
interconnect: qcom: sdx65: convert to dynamic IDs
interconnect: qcom: sdx75: convert to dynamic IDs
interconnect: qcom: sm6350: convert to dynamic IDs
interconnect: qcom: sm7150: convert to dynamic IDs
interconnect: qcom: sm8150: convert to dynamic IDs
interconnect: qcom: sm8350: convert to dynamic IDs
interconnect: qcom: sm8450: convert to dynamic IDs
interconnect: qcom: sm8550: convert to dynamic IDs
interconnect: qcom: sm8650: convert to dynamic IDs
interconnect: qcom: sm8750: convert to dynamic IDs
interconnect: qcom: icc-rpmh: drop support for non-dynamic IDS
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-0-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add interconnect dt-bindings and driver support for Qualcomm Kaanapali SoC.
* icc-kaanapali
dt-bindings: interconnect: document the RPMh Network-On-Chip interconnect in Kaanapali SoC
interconnect: qcom: add Kaanapali interconnect provider driver
dt-bindings: interconnect: qcom-bwmon: Document Kaanapali BWMONs
Link: https://lore.kernel.org/r/20251031-knp-interconnect-v4-0-568bba2cb3e5@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Now as all RPMh interconnect drivers were converted to using the dynamic
IDs, drop support for non-dynamic ID allocation.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-25-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-24-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on QRD8650
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-23-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on QRD8550
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-22-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-21-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-20-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-19-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-18-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-17-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-16-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-15-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-14-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-13-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-12-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-11-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-10-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-9-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-8-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-7-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-6-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-5-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-4-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-3-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-2-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Declaring link_nodes as a double-pointer results in a syntax sugar in
the interconnect driver to typecast the array. Change the type of
link_nodes field to the array to remove the need for the extra typecast.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-1-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add driver for the Qualcomm interconnect buses found in Kaanapali
based platforms. The topology consists of several NoCs that are
controlled by a remote processor that collects the aggregated
bandwidth for each master-slave pairs.
Co-developed-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-knp-interconnect-v4-2-568bba2cb3e5@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
This enables QoS configuration for QNOC type device which can be found
on SA8775P platform. It enables QoS configuration for master ports with
predefined priority and urgency forwarding. This helps in prioritizing
the traffic originating from different interconnect masters at NOC.
The system may function normally without this feature. However, enabling
QoS helps optimize latency and bandwidth across subsystems like CPU, GPU,
and multimedia engines, which becomes important in high-throughput
scenarios. This is a feature aimed at performance enhancement to improve
system performance under concurrent workloads.
* icc-sa8775p
dt-bindings: interconnect: add reg and clocks properties to enable QoS on sa8775p
interconnect: qcom: sa8775p: enable QoS configuration
Link: https://lore.kernel.org/r/20251001073344.6599-1-odelu.kukatla@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Drop the QPIC interconnect and BCM nodes for the SDX75 SoC. The reason
is that this QPIC BCM resource is already defined as a RPMh clock in
clk-rpmh driver as like other SDX SoCs. So it is wrong to describe the
same resource in two different providers.
Also, without this series, the NAND driver fails to probe on SDX75 as
the interconnect sync state disables the QPIC nodes as there were no
clients voting for this ICC resource. However, the NAND driver had already
voted for this BCM resource through the clk-rpmh driver. Since both votes
come from Linux, RPMh was unable to distinguish between these two and ends
up disabling the resource during sync state.
* icc-sdx75
interconnect: qcom: sdx75: Drop QPIC interconnect and BCM nodes
dt-bindings: interconnect: qcom: Drop QPIC_CORE IDs
Link: https://lore.kernel.org/r/20250926-sdx75-icc-v2-0-20d6820e455c@oss.qualcomm.com>
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The lack of the interconnects for the USB2 host might result in the
register writes for the PHY not reaching the PHY and thus the PLL not
locking up, resulting in -EBUSY errors for the USB host on the platform.
Add missing interconnect link and add interconnect paths to the USB2
device.
* icc-msm8996
interconnect: qcom: msm8996: add missing link to SLAVE_USB_HS
arm64: dts: qcom: msm8996: add interconnect paths to USB2 controller
Link: https://lore.kernel.org/r/20251002-fix-msm8996-icc-v1-0-a36a05d1f869@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The icc_commit_set() function, used by the debugfs interface, checks
the validity of the global cur_path pointer using IS_ERR_OR_NULL().
However, in the specific case where cur_path is NULL, while
IS_ERR_OR_NULL(NULL) correctly evaluates to true, the subsequent call
to PTR_ERR(NULL) returns 0.
This causes the function to return a success code (0) instead of an
error, misleading the user into believing their bandwidth request was
successfully committed when, in fact, no operation was performed.
Fix this by adding an explicit check to return -EINVAL if cur_path is
NULL. This prevents silent failures and ensures that an invalid
operational sequence is immediately and clearly reported as an error.
Fixes: 770c69f037c1 ("interconnect: Add debugfs test client")
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20251010151447.2289779-1-visitorckw@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
As like other SDX SoCs, SDX75 SoC's QPIC BCM resource was modeled as a
RPMh clock in clk-rpmh driver. However, for SDX75, this resource was also
described as an interconnect and BCM node mistakenly. It is incorrect to
describe the same resource in two different providers, as it will lead to
votes from clients overriding each other.
Hence, drop the QPIC interconnect and BCM nodes and let the clients use
clk-rpmh driver to vote for this resource.
Without this change, the NAND driver fails to probe on SDX75, as the
interconnect sync state disables the QPIC nodes as there were no clients
voting for this ICC resource. However, the NAND driver had already voted
for this BCM resource through the clk-rpmh driver. Since both votes come
from Linux, RPMh was unable to distinguish between these two and ends up
disabling the QPIC resource during sync state.
Cc: stable@vger.kernel.org
Fixes: 3642b4e5cbfe ("interconnect: qcom: Add SDX75 interconnect provider driver")
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
[mani: dropped the reference to bcm_qp0, reworded description]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Lakshmi Sowjanya D <quic_laksd@quicinc.com> # on SDX75
Link: https://lore.kernel.org/r/20250926-sdx75-icc-v2-1-20d6820e455c@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Enable QoS configuration for master ports with predefinedi priority
and urgency forwarding.
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251001073344.6599-3-odelu.kukatla@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
>From the initial submission the interconnect driver missed the link from
SNOC_PNOC to the USB 2 configuration space. Add missing link in order to
let the platform configure and utilize this path.
Fixes: 7add937f5222 ("interconnect: qcom: Add MSM8996 interconnect provider driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251002-fix-msm8996-icc-v1-1-a36a05d1f869@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add interconnect dt-bindings and driver support for
Qualcomm's next gen compute SoC - Glymur.
* icc-glymur
dt-bindings: interconnect: document the RPMh Network-On-Chip interconnect in Glymur SoC
interconnect: qcom: icc-rpmh: increase MAX_PORTS to support four QoS ports
interconnect: qcom: add glymur interconnect provider driver
Link: https://lore.kernel.org/r/20250814-glymur-icc-v2-0-596cca6b6015@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Make use of device_match_of_node() instead of open coding its
functionality.
Signed-off-by: Zhang Enpei <zhang.enpei@zte.com.cn>
Link: https://lore.kernel.org/r/20250807141833927wb2idY1sZi1OpUKkrXk44@zte.com.cn
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add driver for the Qualcomm interconnect buses found in glymur
based platforms. The topology consists of several NoCs that are
controlled by a remote processor that collects the aggregated
bandwidth for each master-slave pairs.
Co-developed-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250814-glymur-icc-v2-3-596cca6b6015@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Update the MAX_PORTS value to 4 to program four QoS ports
available on the Glymur SoC's interconnect master node.
Co-developed-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250814-glymur-icc-v2-2-596cca6b6015@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO / other driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystems for 6.17-rc1. It's a big set this time around, with the
huge majority being in the iio subsystem with new drivers and dts
files being added there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
binder: Use seq_buf in binder_alloc kunit tests
binder: Add copyright notice to new kunit files
misc: ti_fpc202: Switch to of_fwnode_handle()
bus: moxtet: Use dev_fwnode()
pc104: move PC104 option to drivers/Kconfig
drivers: virt: acrn: Don't use %pK through printk
comedi: fix race between polling and detaching
interconnect: qcom: Add Milos interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
mei: more prints with client prefix
mei: bus: use cldev in prints
bus: mhi: host: pci_generic: Add Telit FN990B40 modem support
bus: mhi: host: Detect events pointing to unexpected TREs
bus: mhi: host: pci_generic: Add Foxconn T99W696 modem
bus: mhi: host: Use str_true_false() helper
bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance.
bus: mhi: host: Fix endianness of BHI vector table
bus: mhi: host: pci_generic: Disable runtime PM for QDU100
bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640
dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio'
...
|
|
Add documentation and driver for the interconnect on the Milos SoC.
* icc-milos
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
interconnect: qcom: Add Milos interconnect provider driver
Link: https://lore.kernel.org/r/20250709-sm7635-icc-v3-0-c446203c3b3a@fairphone.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add driver for the Qualcomm interconnect buses found in Milos based
platforms. The topology consists of several NoCs that are controlled by
a remote processor that collects the aggregated bandwidth for each
master-slave pairs.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250709-sm7635-icc-v3-2-c446203c3b3a@fairphone.com
[georgi: remove null termination of nodes and links]
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
In the same spirit as e.g. Commit b136d257ee0b ("interconnect: qcom:
sc8280xp: Drop IP0 interconnects"), drop the resources that should be
taken care of through the clk-rpmh driver.
Fixes: 77d79677b04b ("interconnect: qcom: add QCS615 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250627-topic-qcs615_icc_ipa-v1-2-dc47596cde69@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Specify .num_nodes for several BCMs which missed this declaration.
Fixes: 04548d4e2798 ("interconnect: qcom: sc8180x: Reformat node and bcm definitions")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250704-rework-icc-v2-2-875fac996ef5@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The qnm_a1noc_cfg declaration didn't include .num_links definition, fix
it.
Fixes: f29dabda7917 ("interconnect: qcom: Add SC8280XP interconnect provider")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250704-rework-icc-v2-1-875fac996ef5@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The 'icc_bw_lock' mutex is introduced in commit af42269c3523
("interconnect: Fix locking for runpm vs reclaim") in order to decouple
serialization of bw aggregation from codepaths that require memory
allocation.
However commit d30f83d278a9 ("interconnect: core: Add dynamic id
allocation support") added a devm_kasprintf() call into a path protected
by the 'icc_bw_lock' which causes the following lockdep warning on
machines like the Lenovo ThinkPad X13s:
======================================================
WARNING: possible circular locking dependency detected
6.16.0-rc3 #15 Not tainted
------------------------------------------------------
(udev-worker)/342 is trying to acquire lock:
ffffb973f7ec4638 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc_node_track_caller_noprof+0xa0/0x3e0
but task is already holding lock:
ffffb973f7f7f0e8 (icc_bw_lock){+.+.}-{4:4}, at: icc_node_add+0x44/0x154
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (icc_bw_lock){+.+.}-{4:4}:
icc_init+0x48/0x108
do_one_initcall+0x64/0x30c
kernel_init_freeable+0x27c/0x500
kernel_init+0x20/0x1d8
ret_from_fork+0x10/0x20
-> #0 (fs_reclaim){+.+.}-{0:0}:
__lock_acquire+0x136c/0x2114
lock_acquire+0x1c8/0x354
fs_reclaim_acquire+0x74/0xa8
__kmalloc_node_track_caller_noprof+0xa0/0x3e0
devm_kmalloc+0x54/0x124
devm_kvasprintf+0x74/0xd4
devm_kasprintf+0x58/0x80
icc_node_add+0xb4/0x154
qcom_osm_l3_probe+0x20c/0x314 [icc_osm_l3]
platform_probe+0x68/0xd8
really_probe+0xc0/0x38c
__driver_probe_device+0x7c/0x160
driver_probe_device+0x40/0x110
__driver_attach+0xfc/0x208
bus_for_each_dev+0x74/0xd0
driver_attach+0x24/0x30
bus_add_driver+0x110/0x234
driver_register+0x60/0x128
__platform_driver_register+0x24/0x30
osm_l3_driver_init+0x20/0x1000 [icc_osm_l3]
do_one_initcall+0x64/0x30c
do_init_module+0x58/0x23c
load_module+0x1df8/0x1f70
init_module_from_file+0x88/0xc4
idempotent_init_module+0x188/0x280
__arm64_sys_finit_module+0x6c/0xd8
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x4c/0x158
el0t_64_sync_handler+0xc8/0xcc
el0t_64_sync+0x198/0x19c
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(icc_bw_lock);
lock(fs_reclaim);
lock(icc_bw_lock);
lock(fs_reclaim);
*** DEADLOCK ***
The icc_node_add() functions is not designed to fail, and as such it
should not do any memory allocation. In order to avoid this, add a new
helper function for the name generation to be called by drivers which
are using the new dynamic id feature.
Fixes: d30f83d278a9 ("interconnect: core: Add dynamic id allocation support")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20250625-icc-bw-lockdep-v3-1-2b8f8b8987c4@gmail.com
Co-developed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250627075854.26943-1-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
When memory allocation fails during creating the name of the nodes in
icc_clk_register(), the code continues on the error path and it calls
icc_nodes_remove() to destroy the already created nodes. However that
function only destroys the nodes which were already added to the provider
and the newly created nodes are never destroyed in case of error.
In order to avoid a memory leaks, change the code to destroy the newly
created nodes explicitly in case of memory allocation failures.
Fixes: 44c5aa73ccd1 ("interconnect: icc-clk: check return values of devm_kasprintf()")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250625-icc-clk-memleak-fix-v1-1-4151484cd24f@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
