| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix FPU core dumps on certain CPU models
- Fix htmldocs build warning
- Export TLB tracing event name via header
- Remove unused constant from <linux/mm_types.h>
- Fix comments
- Fix whitespace noise in documentation
- Fix variadic structure's definition to un-confuse UBSAN
- Fix posted MSI interrupts irq_retrigger() bug
- Fix asm build failure with older GCC builds
* tag 'x86-urgent-2025-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bug: Fix old GCC compile fails
x86/msi: Make irq_retrigger() functional for posted MSI
x86/platform/uv: Fix UBSAN array-index-out-of-bounds
mm: Remove tlb_flush_reason::NR_TLB_FLUSH_REASONS from <linux/mm_types.h>
x86/mm/tlb/trace: Export the TLB_REMOTE_WRONG_CPU enum in <trace/events/tlb.h>
x86/sgx: Remove unmatched quote in __sgx_encl_extend function comment
x86/boot/Documentation: Fix whitespace noise in boot.rst
x86/fpu: Fix FPU state core dump truncation on CPUs with no extended xfeatures
x86/boot/Documentation: Fix htmldocs build warning due to malformed table in boot.rst
|
|
Work around clang problems with "=rm" asm constraint.
clang seems to always chose the memory output, while it is almost
always the worst choice.
Add ASM_OUTPUT_RM so that we can replace "=rm" constraint
where it matters for clang, while not penalizing gcc.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- ublk selftests for missing coverage
- two fixes for the block integrity code
- fix for the newly added newly added PR read keys ioctl, limiting the
memory that can be allocated
- work around for a deadlock that can occur with ublk, where partition
scanning ends up recursing back into file closure, which needs the
same mutex grabbed. Not the prettiest thing in the world, but an
acceptable work-around until we can eliminate the reliance on
disk->open_mutex for this
- fix for a race between enabling writeback throttling and new IO
submissions
- move a bit of bio flag handling code. No changes, but needed for a
patchset for a future kernel
- fix for an init time id leak failure in rnbd
- loop/zloop state check fix
* tag 'block-6.19-20251218' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: validate interval_exp integrity limit
block: validate pi_offset integrity limit
block: rnbd-clt: Fix leaked ID in init_dev()
ublk: fix deadlock when reading partition table
block: add allocation size check in blkdev_pr_read_keys()
Documentation: admin-guide: blockdev: replace zone_capacity with zone_capacity_mb when creating devices
zloop: use READ_ONCE() to read lo->lo_state in queue_rq path
loop: use READ_ONCE() to read lo->lo_state without locking
block: fix race between wbt_enable_default and IO submission
selftests: ublk: add user copy test cases
selftests: ublk: add support for user copy to kublk
selftests: ublk: forbid multiple data copy modes
selftests: ublk: don't share backing files between ublk servers
selftests: ublk: use auto_zc for PER_IO_DAEMON tests in stress_04
selftests: ublk: fix fio arguments in run_io_and_recover()
selftests: ublk: remove unused ios map in seq_io.bt
selftests: ublk: correct last_rw map type in seq_io.bt
selftests: ublk: fix overflow in ublk_queue_auto_zc_fallback()
block: move around bio flagging helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three issues in the power capping code including one recent
regression and a runtime PM framework regression introduced during the
6.17 development cycle:
- Fix CPU hotplug locking deadlock reported by lockdep after a recent
update of the Intel RAPL power capping driver (Srinivas Pandruvada)
- Fix sscanf() error return value handling in the power capping core
and a race condition in register_control_type() (Sumeet Pawnikar)
- Fix a concurrent bit field update issue in the runtime PM core code
by only updating the bit field in question when runtime PM is
disabled (Rafael Wysocki)"
* tag 'pm-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl: Fix possible recursive lock warning
PM: runtime: Do not clear needs_force_resume with enabled runtime PM
powercap: fix sscanf() error return value handling
powercap: fix race condition in register_control_type()
|
|
With the RAPL PMU addition, there is a recursive locking when CPU online
callback function calls rapl_package_add_pmu(). Here cpu_hotplug_lock
is already acquired by cpuhp_thread_fun() and rapl_package_add_pmu()
tries to acquire again.
<4>[ 8.197433] ============================================
<4>[ 8.197437] WARNING: possible recursive locking detected
<4>[ 8.197440] 6.19.0-rc1-lgci-xe-xe-4242-05b7c58b3367dca84+ #1 Not tainted
<4>[ 8.197444] --------------------------------------------
<4>[ 8.197447] cpuhp/0/20 is trying to acquire lock:
<4>[ 8.197450] ffffffff83487870 (cpu_hotplug_lock){++++}-{0:0}, at:
rapl_package_add_pmu+0x37/0x370 [intel_rapl_common]
<4>[ 8.197463]
but task is already holding lock:
<4>[ 8.197466] ffffffff83487870 (cpu_hotplug_lock){++++}-{0:0}, at:
cpuhp_thread_fun+0x6d/0x290
<4>[ 8.197477]
other info that might help us debug this:
<4>[ 8.197480] Possible unsafe locking scenario:
<4>[ 8.197483] CPU0
<4>[ 8.197485] ----
<4>[ 8.197487] lock(cpu_hotplug_lock);
<4>[ 8.197490] lock(cpu_hotplug_lock);
<4>[ 8.197493]
*** DEADLOCK ***
..
..
<4>[ 8.197542] __lock_acquire+0x146e/0x2790
<4>[ 8.197548] lock_acquire+0xc4/0x2c0
<4>[ 8.197550] ? rapl_package_add_pmu+0x37/0x370 [intel_rapl_common]
<4>[ 8.197556] cpus_read_lock+0x41/0x110
<4>[ 8.197558] ? rapl_package_add_pmu+0x37/0x370 [intel_rapl_common]
<4>[ 8.197561] rapl_package_add_pmu+0x37/0x370 [intel_rapl_common]
<4>[ 8.197565] rapl_cpu_online+0x85/0x87 [intel_rapl_msr]
<4>[ 8.197568] ? __pfx_rapl_cpu_online+0x10/0x10 [intel_rapl_msr]
<4>[ 8.197570] cpuhp_invoke_callback+0x41f/0x6c0
<4>[ 8.197573] ? cpuhp_thread_fun+0x6d/0x290
<4>[ 8.197575] cpuhp_thread_fun+0x1e2/0x290
<4>[ 8.197578] ? smpboot_thread_fn+0x26/0x290
<4>[ 8.197581] smpboot_thread_fn+0x12f/0x290
<4>[ 8.197584] ? __pfx_smpboot_thread_fn+0x10/0x10
<4>[ 8.197586] kthread+0x11f/0x250
<4>[ 8.197589] ? __pfx_kthread+0x10/0x10
<4>[ 8.197592] ret_from_fork+0x344/0x3a0
<4>[ 8.197595] ? __pfx_kthread+0x10/0x10
<4>[ 8.197597] ret_from_fork_asm+0x1a/0x30
<4>[ 8.197604] </TASK>
Fix this issue in the same way as rapl powercap package domain is added
from the same CPU online callback by introducing another interface which
doesn't call cpus_read_lock(). Add rapl_package_add_pmu_locked() and
rapl_package_remove_pmu_locked() which don't call cpus_read_lock().
Fixes: 748d6ba43afd ("powercap: intel_rapl: Enable MSR-based RAPL PMU support")
Reported-by: Borah, Chaitanya Kumar <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/linux-pm/5427ede1-57a0-43d1-99f3-8ca4b0643e82@intel.com/T/#u
Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Tested-by: RavitejaX Veesam <ravitejax.veesam@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20251217153455.3560176-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix BPF builds due to -fms-extensions. selftests (Alexei
Starovoitov), bpftool (Quentin Monnet).
- Fix build of net/smc when CONFIG_BPF_SYSCALL=y, but CONFIG_BPF_JIT=n
(Geert Uytterhoeven)
- Fix livepatch/BPF interaction and support reliable unwinding through
BPF stack frames (Josh Poimboeuf)
- Do not audit capability check in arm64 JIT (Ondrej Mosnacek)
- Fix truncated dmabuf BPF iterator reads (T.J. Mercier)
- Fix verifier assumptions of bpf_d_path's output buffer (Shuran Liu)
- Fix warnings in libbpf when built with -Wdiscarded-qualifiers under
C23 (Mikhail Gavrilov)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: add regression test for bpf_d_path()
bpf: Fix verifier assumptions of bpf_d_path's output buffer
selftests/bpf: Add test for truncated dmabuf_iter reads
bpf: Fix truncated dmabuf iterator reads
x86/unwind/orc: Support reliable unwinding through BPF stack frames
bpf: Add bpf_has_frame_pointer()
bpf, arm64: Do not audit capability check in do_jit()
libbpf: Fix -Wdiscarded-qualifiers under C23
bpftool: Fix build warnings due to MS extensions
net: smc: SMC_HS_CTRL_BPF should depend on BPF_JIT
selftests/bpf: Add -fms-extensions to bpf build flags
|
|
Pull shmem rename fixes from Al Viro:
"A couple of shmem rename fixes - recent regression from tree-in-dcache
series and older breakage from stable directory offsets stuff"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
shmem: fix recovery on rename failures
shmem_whiteout(): fix regression from tree-in-dcache series
|
|
maple_tree insertions can fail if we are seriously short on memory;
simple_offset_rename() does not recover well if it runs into that.
The same goes for simple_offset_rename_exchange().
Moreover, shmem_whiteout() expects that if it succeeds, the caller will
progress to d_move(), i.e. that shmem_rename2() won't fail past the
successful call of shmem_whiteout().
Not hard to fix, fortunately - mtree_store() can't fail if the index we
are trying to store into is already present in the tree as a singleton.
For simple_offset_rename_exchange() that's enough - we just need to be
careful about the order of operations.
For simple_offset_rename() solution is to preinsert the target into the
tree for new_dir; the rest can be done without any potentially failing
operations.
That preinsertion has to be done in shmem_rename2() rather than in
simple_offset_rename() itself - otherwise we'd need to deal with the
possibility of failure after successful shmem_whiteout().
Fixes: a2e459555c5f ("shmem: stable directory offsets")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Fix error code in the irqchip/mchp-eic driver
- Fix setup_percpu_irq() affinity assumptions
- Remove the unused irq_domain_add_tree() function
* tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc()
irqdomain: Delete irq_domain_add_tree()
genirq: Allow NULL affinity for setup_percpu_irq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc core fixes from Ingo Molnar:
- Improve bug reporting
- Suppress W=1 format warning
- Improve rseq scalability on Clang builds
* tag 'core-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Always inline rseq_debug_syscall_return()
bug: Hush suggest-attribute=format for __warn_printf()
bug: Let report_bug_entry() provide the correct bugaddr
|
|
This has been unused since it was added 11 years ago in:
d17d8f9dedb9 ("x86/mm: Add tracepoints for TLB flushes")
Signed-off-by: Tal Zussman <tz2294@columbia.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://patch.msgid.link/20251212-tlb-trace-fix-v2-2-d322e0ad9b69@columbia.edu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"There are no significant series in this small merge. Please see the
individual changelogs for details"
[ Editor's note: it's mainly ocfs2 and a couple of random fixes ]
* tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memfd_luo: add CONFIG_SHMEM dependency
mm: shmem: avoid build warning for CONFIG_SHMEM=n
ocfs2: fix memory leak in ocfs2_merge_rec_left()
ocfs2: invalidate inode if i_mode is zero after block read
ocfs2: avoid -Wflex-array-member-not-at-end warning
ocfs2: convert remaining read-only checks to ocfs2_emergency_state
ocfs2: add ocfs2_emergency_state helper and apply to setattr
checkpatch: add uninitialized pointer with __free attribute check
args: fix documentation to reflect the correct numbers
ocfs2: fix kernel BUG in ocfs2_find_victim_chain
liveupdate: luo_core: fix redundant bound check in luo_ioctl()
ocfs2: validate inline xattr size and entry count in ocfs2_xattr_ibody_list
fs/fat: remove unnecessary wrapper fat_max_cache()
ocfs2: replace deprecated strcpy with strscpy
ocfs2: check tl_used after reading it from trancate log inode
liveupdate: luo_file: don't use invalid list iterator
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "powerpc/pseries/cmm: two smaller fixes" (David Hildenbrand)
fixes a couple of minor things in ppc land
- "Improve folio split related functions" (Zi Yan)
some cleanups and minorish fixes in the folio splitting code
* tag 'mm-stable-2025-12-11-11-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/damon/tests/core-kunit: avoid damos_test_commit stack warning
mm: vmscan: correct nr_requested tracing in scan_folios
MAINTAINERS: add idr core-api doc file to XARRAY
mm/hugetlb: fix incorrect error return from hugetlb_reserve_pages()
mm: fix CONFIG_STACK_GROWSUP typo in mm.h
mm/huge_memory: fix folio split stats counting
mm/huge_memory: make min_order_for_split() always return an order
mm/huge_memory: replace can_split_folio() with direct refcount calculation
mm/huge_memory: change folio_split_supported() to folio_check_splittable()
mm/sparse: fix sparse_vmemmap_init_nid_early definition without CONFIG_SPARSEMEM
powerpc/pseries/cmm: adjust BALLOON_MIGRATE when migrating pages
powerpc/pseries/cmm: call balloon_devinfo_init() also without CONFIG_BALLOON_COMPACTION
|
|
Brown paper bag time. This is a silly oversight where I missed to drop
the error condition checking to ensure we clean up on early error
returns. I have an internal unit testset coming up for this which will
catch all such issues going forward.
Reported-by: Chris Mason <clm@fb.com>
Reported-by: Jeff Layton <jlayton@kernel.org>
Fixes: 011703a9acd7 ("file: add FD_{ADD,PREPARE}()")
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull further i3c update from Alexandre Belloni:
"We are removing a legacy API callback and having this sooner rather
than later will help ensuring no one introduces a new driver using it.
I've also added patches removing the "__free(...) = NULL" pattern
because I'm sure we won't avoid people sending those following the
mailing list discussion..."
* tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: adi: Fix confusing cleanup.h syntax
i3c: master: Fix confusing cleanup.h syntax
i3c: master: cleanup callback .priv_xfers()
i3c: master: switch to use new callback .i3c_xfers() from .priv_xfers()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- stop setting max_user_freq from the individual drivers as this has
not been hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Drivers:
- renesas-rtca3: add RZ/V2H support
- tegra: add ACPI support"
* tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
rtc: spacemit: MFD_SPACEMIT_P1 as dependencies
rtc: atcrtc100: Fix signedness bug in probe()
rtc: max31335: Fix ignored return value in set_alarm
rtc: gamecube: Check the return value of ioremap()
Documentation: ABI: testing: Fix "upto" typo in rtc-cdev
rtc: Add new rtc-macsmc driver for Apple Silicon Macs
dt-bindings: rtc: Add Apple SMC RTC
MAINTAINERS: drop unneeded file entry in NVIDIA VRS RTC DRIVER
rtc: isl12026: Add id_table
rtc: renesas-rtca3: Add support for multiple reset lines
dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2H support
rtc: tegra: Replace deprecated SIMPLE_DEV_PM_OPS
rtc: tegra: Add ACPI support
rtc: tegra: Use devm_clk_get_enabled() in probe
rtc: Kconfig: add MC34708 to mc13xxx help text
rtc: s35390a: use u8 instead of char for register buffer
rtc: nvvrs: add NVIDIA VRS RTC device driver
dt-bindings: rtc: Document NVIDIA VRS RTC
rtc: atcrtc100: Add ATCRTC100 RTC driver
MAINTAINERS: Add entry for ATCRTC100 RTC driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Support for multiple sections in a BPT stream
- Align DMA frame with BPT frames
- Qualcomm support for v3.1.0 controllers
* tag 'soundwire-6.19-rc1_updated' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: handle multi BPT sections
soundwire: pass sdw_bpt_section to cdns BPT helpers
soundwire: introduce BPT section
soundwire: intel_ace2x: add fake frame to BRA read command
soundwire: cadence_master: add fake_size parameter to sdw_cdns_prepare_read_dma_buffer
ASoC: SOF: Intel: export hda_sdw_bpt_get_buf_size_aligment
soundwire: cadence: export sdw_cdns_bpt_find_bandwidth
soundwire: cadence_master: set data_per_frame as frame capability
soundwire: only compute BPT stream in sdw_compute_dp0_port_params
soundwire: cadence_master: make frame index trace more readable
soundwire: qcom: adding support for v3.1.0
dt-bindings: soundwire: qcom: Document v3.1.0 version of IP block
soundwire: qcom: prepare for v3.x
soundwire: qcom: deprecate qcom,din/out-ports
dt-bindings: soundwire: qcom: deprecate qcom,din/out-ports
soundwire: qcom: remove unused rd_fifo_depth
of: base: Add of_property_read_u8_index
|
|
Remove the .priv_xfers() callback from the framework after all master
controller drivers have switched to use the new .i3c_xfers() callback.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20251203-i3c_xfer_cleanup_master-v2-2-7dd94d04ee2d@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
We'll need bio_flagged() earlier in bio.h for later patches, move it
together with all related helpers, and mark the bio_flagged()'s bio
argument as const.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull NFS client updates from Trond Myklebust:
"Bugfixes:
- Fix 'nlink' attribute update races when unlinking a file
- Add missing initialisers for the directory verifier in various
places
- Don't regress the NFSv4 open state due to misordered racing replies
- Ensure the NFSv4.x callback server uses the correct transport
connection
- Fix potential use-after-free races when shutting down the NFSv4.x
callback server
- Fix a pNFS layout commit crash
- Assorted fixes to ensure correct propagation of mount options when
the client crosses a filesystem boundary and triggers the VFS
automount code
- More localio fixes
Features and cleanups:
- Add initial support for basic directory delegations
- SunRPC back channel code cleanups"
* tag 'nfs-for-6.19-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (24 commits)
NFSv4: Handle NFS4ERR_NOTSUPP errors for directory delegations
nfs/localio: remove 61 byte hole from needless ____cacheline_aligned
nfs/localio: remove alignment size checking in nfs_is_local_dio_possible
NFS: Fix up the automount fs_context to use the correct cred
NFS: Fix inheritance of the block sizes when automounting
NFS: Automounted filesystems should inherit ro,noexec,nodev,sync flags
Revert "nfs: ignore SB_RDONLY when mounting nfs"
Revert "nfs: clear SB_RDONLY before getting superblock"
Revert "nfs: ignore SB_RDONLY when remounting nfs"
NFS: Add a module option to disable directory delegations
NFS: Shortcut lookup revalidations if we have a directory delegation
NFS: Request a directory delegation during RENAME
NFS: Request a directory delegation on ACCESS, CREATE, and UNLINK
NFS: Add support for sending GDD_GETATTR
NFSv4/pNFS: Clear NFS_INO_LAYOUTCOMMIT in pnfs_mark_layout_stateid_invalid
NFSv4.1: protect destroying and nullifying bc_serv structure
SUNRPC: new helper function for stopping backchannel server
SUNRPC: cleanup common code in backchannel request
NFSv4.1: pass transport for callback shutdown
NFSv4: ensure the open stateid seqid doesn't go backwards
...
|
|
To get the full benefit of:
eaa9088d568c ("rseq: Use static branch for syscall exit debug when GENERIC_IRQ_ENTRY=y")
clang needs an __always_inline instead of a plain inline qualifier:
$ for i in {1..10}; do taskset -c 4 perf5 bench syscall basic -l 100000000 | grep "ops/sec"; done
Before After
ops/sec 15424491 15872221 +2.9%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251205100753.4073221-1-edumazet@google.com
|
|
The macro uses up to 15 arguments. Reflect this in the top level comment.
Link: https://lkml.kernel.org/r/20251201201018.765475-1-andriy.shevchenko@linux.intel.com
Fixes: d51e783c17ba ("lsm: count the LSMs enabled at compile time")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- A stable fix for performance regression in tests that perform
kmem_cache_destroy() a lot, due to unnecessarily wide scope of
kvfree_rcu_barrier() (Harry Yoo)
* tag 'slab-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: introduce kvfree_rcu_barrier_on_cache() for cache destruction
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- Use the MSI parent domain API instead of the legacy API for setup and
teardown of PCI MSI IRQs
- Select POSIX_CPU_TIMERS_TASK_WORK now that VIRT_XFER_TO_GUEST_WORK
has been implemented for s390
- Fix a KVM bug which can lead to guest memory corruption
- Fix KASAN shadow memory mapping for hotplugged memory
- Minor bug fixes and improvements
* tag 's390-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/bug: Add missing alignment
s390/bug: Add missing CONFIG_BUG ifdef again
KVM: s390: Fix gmap_helper_zap_one_page() again
s390/pci: Migrate s390 IRQ logic to IRQ domain API
genirq: Change hwirq parameter to irq_hw_number_t
s390: Select POSIX_CPU_TIMERS_TASK_WORK
s390: Unmap early KASAN shadow on memory offlining
s390/vmem: Support 2G page splitting for KASAN shadow freeing
s390/boot: Use entire page for PTEs
s390/vmur: Use scnprintf() instead of sprintf()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
- last minute fix for missing parenthesis in recently merged code (Hans
de Goede)
- removal of excessive, non-fatal warnings (Dave Kleikamp)
* tag 'dma-mapping-6.19-2025-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: Fix DMA_BIT_MASK() macro being broken
dma/pool: eliminate alloc_pages warning in atomic_pool_expand
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex updates from Ingo Molnar:
- Standardize on ktime_t in restart_block::time as well (Thomas
Weißschuh)
- Futex selftests:
- Add robust list testcases (André Almeida)
- Formatting fixes/cleanups (Carlos Llamas)
* tag 'locking-futex-2025-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Store time as ktime_t in restart block
selftests/futex: Create test for robust list
selftests/futex: Skip tests if shmget unsupported
selftests/futex: Add newline to ksft_exit_fail_msg()
selftests/futex: Remove unused test_futex_mpol()
|
|
Introduce a bpf_has_frame_pointer() helper that unwinders can call to
determine whether a given instruction pointer is within the valid frame
pointer region of a BPF JIT program or trampoline (i.e., after the
prologue, before the epilogue).
This will enable livepatch (with the ORC unwinder) to reliably unwind
through BPF JIT frames.
Acked-by: Song Liu <song@kernel.org>
Acked-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/fd2bc5b4e261a680774b28f6100509fd5ebad2f0.1764818927.git.jpoimboe@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
|
|
No in-tree users anymore.
[ tglx: Remove the reference in the Chinese documentation as well ]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251202202327.1444693-1-andriy.shevchenko@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- acer-wmi: Add PH16-72, PHN16-72, and PT14-51 fan control support
- acpi: platform_profile: Add max-power profile option (power draw
limited by the cooling hardware, may exceed battery power draw limit
when on AC power)
- amd/hsmp: Allow more than one data-fabric per socket
- asus-armoury: Add WMI attributes driver to expose miscellaneous WMI
functions through fw_attributes (deprecates the custom BIOS features
interface through asus-wmi)
- asus-wmi: Use brightness_set_blocking() for kbd led
- ayaneo-ec: Add Ayaneo Embedded Controller driver
- fs/nls:
- Fix utf16 to utf8 string conversion when output size restricted
- Improve error code consistency for utf8 to utf32 conversions
- ideapad-laptop: Fast (Rapid Charge) charge type support
- intel/hid: Add Dell Pro Rugged 10/12 tablet to VGBS DMI quirks
- intel/pmc:
- Arrow Lake telemetry GUID improvements
- Add support for Wildcat Lake PMC information
- intel_pmc_ipc: Fix ACPI buffer memleak
- intel/punit_ipc: Fix memory corruption
- intel/vsec: Wildcat Lake PMT telemetry support
- lenovo-wmi-gamezone: Map "Extreme" performance mode to max-power
- lg-laptop: Add support for the HDAP opregion field
- serial-multi-instantiate: Add IRQ_RESOURCE_OPT for IRQ missing
projects
- thinkpad-t14s-ec: Improve suspend/resume support (lid LEDs, keyboard
backlight)
- uniwill: Add Uniwill laptop driver
- wmi: Move under drivers/platform/wmi as non-x86 WMI support is around
the corner and other WMI features will require adding more C files as
well
- tools/power/x86/intel-speed-select: v1.24
- Check feature status to check if the feature enablement was
successful
- Reset SST-TF bucket structure to display valid bucket info
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (73 commits)
tools/power/x86/intel-speed-select: v1.24 release
tools/power/x86/intel-speed-select: Reset isst_turbo_freq_info for invalid buckets
tools/power/x86/intel-speed-select: Check feature status
platform/x86: asus-wmi: use brightness_set_blocking() for kbd led
fs/nls: Fix inconsistency between utf8_to_utf32() and utf32_to_utf8()
platform/x86: asus-armoury: add support for GA503QR
platform/x86: intel_pmc_ipc: fix ACPI buffer memory leak
platform/x86: hp-wmi: Order DMI board name arrays
platform/x86/intel/hid: Add Dell Pro Rugged 10/12 tablet to VGBS DMI quirks
platform: surface: replace use of system_wq with system_percpu_wq
platform: x86: replace use of system_wq with system_percpu_wq
platform/surface: acpi-notify: add WQ_PERCPU to alloc_workqueue users
platform/x86: wmi-gamezone: Add Legion Go 2 Quirks
platform/x86: lenovo-wmi-gamezone Use max-power rather than balanced-performance
acpi: platform_profile - Add max-power profile option
platform/x86/amd/pmf: Use devm_mutex_init() for mutex initialization
platform/x86/amd/pmf: Add BIOS_INPUTS_MAX macro to replace hardcoded array size
platform/x86: serial-multi-instantiate: Add IRQ_RESOURCE_OPT for IRQ missing projects
platform/x86/amd/pmf: Refactor repetitive BIOS output handling
platform/x86/uniwill: Add TUXEDO devices
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"Fix a runtime PM unit test added during the 6.18 development cycle and
change the pm_runtime_barrier() return type to void (Brian Norris)"
* tag 'pm-6.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
coccinelle: Drop pm_runtime_barrier() error code checks
PM: runtime: Make pm_runtime_barrier() return void
PM: runtime: Stop checking pm_runtime_barrier() return code
|
|
Add a cond_lock annotation for lockref_put_or_lock to make sparse
happy with using it. Note that for this the return value has to be
double-inverted as the return value convention of lockref_put_or_lock
is inverted compared to _trylock conventions expected by __cond_lock,
as lockref_put_or_lock returns true when it did not need to take the
lock.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-auto
Pull __auto_type to auto conversion from Peter Anvin:
"Convert '__auto_type' to 'auto', defining a macro for 'auto' unless
C23+ is in use"
* tag 'auto-type-conversion-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-auto:
tools/virtio: replace "__auto_type" with "auto"
selftests/bpf: replace "__auto_type" with "auto"
arch/x86: replace "__auto_type" with "auto"
arch/nios2: replace "__auto_type" and adjacent equivalent with "auto"
fs/proc: replace "__auto_type" with "const auto"
include/linux: change "__auto_type" to "auto"
compiler_types.h: add "auto" as a macro for "__auto_type"
|
|
Commit 2b6a3f061f11 ("mm: declare VMA flags by bit") significantly
refactors the header file include/linux/mm.h. In that step, it introduces
a typo in an ifdef, referring to a non-existing config option
STACK_GROWS_UP, whereas the actual config option is called STACK_GROWSUP.
Fix this typo in the mm header file.
Link: https://lkml.kernel.org/r/20251201122922.352480-1-lukas.bulwahn@redhat.com
Fixes: 2b6a3f061f11 ("mm: declare VMA flags by bit")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
min_order_for_split() returns -EBUSY when the folio is truncated and
cannot be split. In commit 77008e1b2ef7 ("mm/huge_memory: do not change
split_huge_page*() target order silently"), memory_failure() does not
handle it and pass -EBUSY to try_to_split_thp_page() directly.
try_to_split_thp_page() returns -EINVAL since -EBUSY becomes 0xfffffff0 as
new_order is unsigned int in __folio_split() and this large new_order is
rejected as an invalid input. The code does not cause a bug.
soft_offline_in_use_page() also uses min_order_for_split() but it always
passes 0 as new_order for split.
Fix it by making min_order_for_split() always return an order. When the
given folio is truncated, namely folio->mapping == NULL, return 0 and let
a subsequent split function handle the situation and return -EBUSY.
Add kernel-doc to min_order_for_split() to clarify its use.
Link: https://lkml.kernel.org/r/20251126210618.1971206-4-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
can_split_folio() is just a refcount comparison, making sure only the
split caller holds an extra pin. Open code it with
folio_expected_ref_count() != folio_ref_count() - 1. For the extra_pins
used by folio_ref_freeze(), add folio_cache_ref_count() to calculate it.
Also replace folio_expected_ref_count() with folio_cache_ref_count() used
by folio_ref_unfreeze(), since they are returning the same values when a
folio is frozen and folio_cache_ref_count() does not have unnecessary
folio_mapcount() in its implementation.
Link: https://lkml.kernel.org/r/20251126210618.1971206-3-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Suggested-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Improve folio split related functions", v4.
This patchset improves several folio split related functions to avoid
future misuse. The changes are:
1. Consolidated folio splittable checks by moving truncated folio check,
huge zero folio check, and writeback folio check into
folio_split_supported(). Changed the function return type. Renamed it
to folio_check_splittable() for clarification.
2. Replaced can_split_folio() with open coded folio_expected_ref_count()
and folio_ref_count() and introduced folio_cache_ref_count().
3. Changed min_order_for_split() to always return an order.
4. Fixed folio split stats counting.
Motivation
==========
This is based on Wei's observation[1] and solves several potential
issues:
1. Dereferencing NULL folio->mapping in try_folio_split_to_order() if it
is called on truncated folios.
2. Not handling of negative return value of min_order_for_split() in
mm/memory-failure.c
There is no bug in the current code.
This patch (of 4):
folio_split_supported() used in try_folio_split_to_order() requires
folio->mapping to be non NULL, but current try_folio_split_to_order() does
not check it. There is no issue in the current code, since
try_folio_split_to_order() is only used in truncate_inode_partial_folio(),
where folio->mapping is not NULL.
To prevent future misuse, move folio->mapping NULL check (i.e., folio is
truncated) into folio_split_supported(). Since folio->mapping NULL check
returns -EBUSY and folio_split_supported() == false means -EINVAL, change
folio_split_supported() return type from bool to int and return error
numbers accordingly. Rename folio_split_supported() to
folio_check_splittable() to match the return type change.
While at it, move is_huge_zero_folio() check and folio_test_writeback()
check into folio_check_splittable() and add kernel-doc.
Remove all warnings inside folio_check_splittable() and give warnings
in __folio_split() instead, so that bool warns parameter can be removed.
Link: https://lkml.kernel.org/r/20251126210618.1971206-1-ziy@nvidia.com
Link: https://lkml.kernel.org/r/20251126210618.1971206-2-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Balbir Singh <balbirs@nvidia.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When CONFIG_SPARSEMEM is disabled, the macro
sparse_vmemmap_init_nid_early(_nid, _use) passes two arguments, while the
actual function accepts only nid. Drop the extra argument _use.
Link: https://lkml.kernel.org/r/20251127092512.278-1-guojinhui.liam@bytedance.com
Fixes: d65917c42373 ("mm/sparse: allow for alternate vmemmap section init at boot")
Signed-off-by: Jinhui Guo <guojinhui.liam@bytedance.com>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "David Hildenbrand (Red Hat)" <david@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"This series focuses on minor clean-ups and performance optimizations
across sysfs, documentation, debugfs, tracepoints, slab allocation,
and GC. Furthermore, it resolves several corner-case bugs caught by
xfstests, as well as issues related to 16KB page support and
f2fs_enable_checkpoint.
Enhancement:
- wrap ASCII tables in literal blocks to fix LaTeX build
- optimize trace_f2fs_write_checkpoint with enums
- support to show curseg.next_blkoff in debugfs
- add a sysfs entry to show max open zones
- add fadvise tracepoint
- use global inline_xattr_slab instead of per-sb slab cache
- set default valid_thresh_ratio to 80 for zoned devices
- maintain one time GC mode is enabled during whole zoned GC cycle
Bug fix:
- ensure node page reads complete before f2fs_put_super() finishes
- do not account invalid blocks in get_left_section_blocks()
- revert summary entry count from 2048 to 512 in 16kb block support
- detect recoverable inode during dryrun of find_fsync_dnodes()
- fix age extent cache insertion skip on counter overflow
- add sanity checks before unlinking and loading inodes
- ensure minimum trim granularity accounts for all devices
- block cache/dio write during f2fs_enable_checkpoint()
- propagate error from f2fs_enable_checkpoint()
- invalidate dentry cache on failed whiteout creation
- avoid updating compression context during writeback
- avoid updating zero-sized extent in extent cache
- avoid potential deadlock"
* tag 'f2fs-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (39 commits)
f2fs: ignore discard return value
f2fs: optimize trace_f2fs_write_checkpoint with enums
f2fs: fix to not account invalid blocks in get_left_section_blocks()
f2fs: support to show curseg.next_blkoff in debugfs
docs: f2fs: wrap ASCII tables in literal blocks to fix LaTeX build
f2fs: expand scalability of f2fs mount option
f2fs: change default schedule timeout value
f2fs: introduce f2fs_schedule_timeout()
f2fs: use memalloc_retry_wait() as much as possible
f2fs: add a sysfs entry to show max open zones
f2fs: wrap all unusable_blocks_per_sec code in CONFIG_BLK_DEV_ZONED
f2fs: simplify list initialization in f2fs_recover_fsync_data()
f2fs: revert summary entry count from 2048 to 512 in 16kb block support
f2fs: fix to detect recoverable inode during dryrun of find_fsync_dnodes()
f2fs: fix return value of f2fs_recover_fsync_data()
f2fs: add fadvise tracepoint
f2fs: fix age extent cache insertion skip on counter overflow
f2fs: Add sanity checks before unlinking and loading inodes
f2fs: Rename f2fs_unlink exit label
f2fs: ensure minimum trim granularity accounts for all devices
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
"Followup set of fixes and updates for block for the 6.19 merge window.
NVMe had some late minute debates which lead to dropping some patches
from that tree, which is why the initial PR didn't have NVMe included.
It's here now. This pull request contains:
- NVMe pull request via Keith:
- Subsystem usage cleanups (Max)
- Endpoint device fixes (Shin'ichiro)
- Debug statements (Gerd)
- FC fabrics cleanups and fixes (Daniel)
- Consistent alloc API usages (Israel)
- Code comment updates (Chu)
- Authentication retry fix (Justin)
- Fix a memory leak in the discard ioctl code, if the task is being
interrupted by a signal at just the wrong time
- Zoned write plugging fixes
- Add ioctls for for persistent reservations
- Enable per-cpu bio caching by default
- Various little fixes and tweaks"
* tag 'block-6.19-20251208' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (27 commits)
nvme-fabrics: add ENOKEY to no retry criteria for authentication failures
nvme-auth: use kvfree() for memory allocated with kvcalloc()
nvmet-tcp: use kvcalloc for commands array
nvmet-rdma: use kvcalloc for commands and responses arrays
nvme: fix typo error in nvme target
nvmet-fc: use pr_* print macros instead of dev_*
nvmet-fcloop: remove unused lsdir member.
nvmet-fcloop: check all request and response have been processed
nvme-fc: check all request and response have been processed
block: fix memory leak in __blkdev_issue_zero_pages
block: fix comment for op_is_zone_mgmt() to include RESET_ALL
block: Clear BLK_ZONE_WPLUG_PLUGGED when aborting plugged BIOs
blk-mq: Abort suspend when wakeup events are pending
blk-mq: add blk_rq_nr_bvec() helper
block: add IOC_PR_READ_RESERVATION ioctl
block: add IOC_PR_READ_KEYS ioctl
nvme: reject invalid pr_read_keys() num_keys values
scsi: sd: reject invalid pr_read_keys() num_keys values
block: enable per-cpu bio cache by default
block: use bio_alloc_bioset for passthru IO by default
...
|
|
Replace instances of "__auto_type" with "auto" in include/linux.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
|
|
"auto" was defined as a keyword back in the K&R days, but as a storage
type specifier. No one ever used it, since it was and is the default
storage type for local variables.
C++11 recycled the keyword to allow a type to be declared based on the
type of an initializer. This was finally adopted into standard C in
C23.
gcc and clang provide the "__auto_type" alias keyword as an extension
for pre-C23, however, there is no reason to pollute the bulk of the
source base with this temporary keyword; instead define "auto" as a
macro unless the compiler is running in C23+ mode.
This macro is added in <linux/compiler_types.h> because that header is
included in some of the tools headers, wheres <linux/compiler.h> is
not as it has a bunch of very kernel-specific things in it.
[ Cc: stable to reduce potential backporting burden. ]
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Cc: <stable@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"The technical details below. For me the CIX Semi and Axis
Communications ARTPEC-9 SoCs were the most interesting new drivers in
this merge window.
Core changes:
- Handle per-direction skew control in the generic pin config
- Drop the pointless subsystem boilerplate banner message during
boot. Less noise in the console. It's available as debug message if
someone really want it
New drivers:
- Samsung Exynos 8890 SoC support
- Samsung Exynos derived Axis Communications ARTPEC-9 SoC support.
These guys literally live next door to me, ARTPEC spells out "Axis
Real-Time Picture Encoding Chip" and is tailored for camera image
streams and is something they have evolved for a quarter of a
century
- Mediatek MT6878 SoC support
- Qualcomm Glymur PMIC support (mostly just compatible strings)
- Qualcomm Kaanapali SoC TLMM support
- Microchip pic64gx "gpio2" SoC support
- Microchip Polarfire "iomux0" SoC support
- CIX Semiconductors SKY1 SoC support
- Rockchip RK3506 SoC support
- Airhoa AN7583 chip support
Improvements:
- Improvements for ST Microelectronics STM32 handling of skew
settings so input and output can have different skew settings
- A whole bunch of device tree binding cleanups: Marvell Armada and
Berlin, Actions Semiconductor S700 and S900, Broadcom Northstar 2
(NS2), Bitmain BM1880 and Spreadtrum SC9860 are moved over to
schema"
* tag 'pinctrl-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits)
pinctrl: add CONFIG_OF dependencies for microchip drivers
pinctrl: starfive: use dynamic GPIO base allocation
pinctrl: single: Fix incorrect type for error return variable
MAINTAINERS: Change Linus Walleij mail address
pinctrl: cix: Fix obscure dependency
dt-bindings: pinctrl: cix,sky1-pinctrl: Drop duplicate newline
dt-bindings: pinctrl: aspeed,ast2600-pinctrl: Add PCIe RC PERST# group
pinctrl: airoha: Fix AIROHA_PINCTRL_CONFS_DRIVE_E2 in an7583_pinctrl_match_data
pinctrl: airoha: fix pinctrl function mismatch issue
pinctrl: cherryview: Convert to use intel_gpio_add_pin_ranges()
pinctrl: intel: Export intel_gpio_add_pin_ranges()
pinctrl: renesas: rzg2l: Refactor OEN register PWPR handling
pinctrl: airoha: convert comma to semicolon
pinctrl: elkhartlake: Switch to INTEL_GPP() macro
pinctrl: cherryview: Switch to INTEL_GPP() macro
pinctrl: emmitsburg: Switch to INTEL_GPP() macro
pinctrl: denverton: Switch to INTEL_GPP() macro
pinctrl: cedarfork: Switch to INTEL_GPP() macro
pinctrl: airoha: add support for Airoha AN7583 PINs
dt-bindings: pinctrl: airoha: Document AN7583 Pin Controller
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"Core:
- Drop Kishon as maintainer, thanks to him for helping, move to
credits and add Neil to help with reviews.
- Add new phy_notify_stat to notify phy from controllers during the
runtime transitions and usage in samsung phy
New hardware support:
- Renesas RZ/G3E USB3.0 driver
- NXP Support TJA1048/TJA1051 CAN phy
- Rockchip support for rk3506 dsi dphy
- Qualcomm Glymur QMP PCIe PHY support
Updates:
- PM support for rcar-gen3-usb2 driver
- Samsung HDMI/eDP Transmitter Combo PHY updates
- Freescale imx8mq support for alternate reference clock"
* tag 'phy-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (40 commits)
MAINTAINERS: phy: Add Neil Armstrong as reviewers for phy subsystem
MAINTAINERS: phy: Move Kishon Vijay Abraham I to credits
phy: fsl-imx8mq-usb: support alternate reference clock
dt-bindings: phy: imx8mq-usb: add alternate reference clock
phy: rockchip: samsung-hdptx: Prevent Inter-Pair Skew from exceeding the limits
phy: rockchip: samsung-hdptx: Reduce ROPLL loop bandwidth
phy: rockchip: samsung-hdptx: Fix reported clock rate in high bpc mode
phy: ti: gmii-sel: Add a sanity check on the phy_id
phy: qcom: qmp-pcie: Add support for Glymur PCIe Gen5x4 PHY
phy: qcom-qmp: pcs: Add v8.50 register offsets
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the Glymur QMP PCIe PHY
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Restrict resets per each device
phy: freescale: Initialize priv->lock
phy: renesas: Remove unneeded semicolons
phy: qcom: m31-eusb2: Update init sequence to set PHY_ENABLE
phy: qcom: qmp-combo: get the USB3 & DisplayPort lanes mapping from DT
dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document lanes mapping when not using in USB-C complex
phy: rockchip: naneng-combphy: Fix PCIe L1ss support RK3562
phy: rockchip: naneng-combphy: Fix PCIe L1ss support RK3528
phy: renesas: rcar-gen3-usb2: Add suspend/resume support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Enhancements to Linux as the root partition for Microsoft Hypervisor:
- Support a new mode called L1VH, which allows Linux to drive the
hypervisor running the Azure Host directly
- Support for MSHV crash dump collection
- Allow Linux's memory management subsystem to better manage guest
memory regions
- Fix issues that prevented a clean shutdown of the whole system on
bare metal and nested configurations
- ARM64 support for the MSHV driver
- Various other bug fixes and cleanups
- Add support for Confidential VMBus for Linux guest on Hyper-V
- Secure AVIC support for Linux guests on Hyper-V
- Add the mshv_vtl driver to allow Linux to run as the secure kernel in
a higher virtual trust level for Hyper-V
* tag 'hyperv-next-signed-20251207' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (58 commits)
mshv: Cleanly shutdown root partition with MSHV
mshv: Use reboot notifier to configure sleep state
mshv: Add definitions for MSHV sleep state configuration
mshv: Add support for movable memory regions
mshv: Add refcount and locking to mem regions
mshv: Fix huge page handling in memory region traversal
mshv: Move region management to mshv_regions.c
mshv: Centralize guest memory region destruction
mshv: Refactor and rename memory region handling functions
mshv: adjust interrupt control structure for ARM64
Drivers: hv: use kmalloc_array() instead of kmalloc()
mshv: Add ioctl for self targeted passthrough hvcalls
Drivers: hv: Introduce mshv_vtl driver
Drivers: hv: Export some symbols for mshv_vtl
static_call: allow using STATIC_CALL_TRAMP_STR() from assembly
mshv: Extend create partition ioctl to support cpu features
mshv: Allow mappings that overlap in uaddr
mshv: Fix create memory region overlap check
mshv: add WQ_PERCPU to alloc_workqueue users
Drivers: hv: Use kmalloc_array() instead of kmalloc()
...
|
|
After commit a50f7456f853 ("dma-mapping: Allow use of DMA_BIT_MASK(64) in
global scope"), the DMA_BIT_MASK() macro is broken when passed non trivial
statements for the value of 'n'. This is caused by the new version missing
parenthesis around 'n' when evaluating 'n'.
One example of this breakage is the IPU6 driver now crashing due to
it getting DMA-addresses with address bit 32 set even though it has
tried to set a 32 bit DMA mask.
The IPU6 CSI2 engine has a DMA mask of either 31 or 32 bits depending
on if it is in secure mode or not and it sets this masks like this:
mmu_info->aperture_end =
(dma_addr_t)DMA_BIT_MASK(isp->secure_mode ?
IPU6_MMU_ADDR_BITS :
IPU6_MMU_ADDR_BITS_NON_SECURE);
So the 'n' argument here is "isp->secure_mode ? IPU6_MMU_ADDR_BITS :
IPU6_MMU_ADDR_BITS_NON_SECURE" which gets expanded into:
isp->secure_mode ? IPU6_MMU_ADDR_BITS : IPU6_MMU_ADDR_BITS_NON_SECURE - 1
With the -1 only being applied in the non secure case, causing
the secure mode mask to be one 1 bit too large.
Fixes: a50f7456f853 ("dma-mapping: Allow use of DMA_BIT_MASK(64) in global scope")
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251207184756.97904-1-johannes.goede@oss.qualcomm.com
|
|
Add support for of_property_read_u8_index(), simillar to others
u16 and u32 variants. Having this helper makes the code more tidy in
isome cases, specially when we are parsing multiple of these into
data structures.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # sm8550
Link: https://patch.msgid.link/20250912083225.228778-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"HDR support has finally been added. mipi-i3c-hci has been reworked and
Intel Nova Lake-S support has been added.
Subsystem:
- Add HDR transfer support
Drivers:
- dw: fix bus hang on Agilex5
- mipi-i3c-hci: Intel Nova Lake-S support, IOMMU support
- svc: HDR support"
* tag 'i3c/for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (28 commits)
regmap: i3c: switch to use i3c_xfer from i3c_priv_xfer
net: mctp i3c: switch to use i3c_xfer from i3c_priv_xfer
hwmon: (lm75): switch to use i3c_xfer from i3c_priv_xfer
i3c: document i3c_xfers
i3c: fix I3C_SDR bit number
i3c: master: svc: Add basic HDR mode support
i3c: master: svc: Replace bool rnw with union for HDR support
i3c: Switch to use new i3c_xfer from i3c_priv_xfer
i3c: Add HDR API support
i3c: master: add WQ_PERCPU to alloc_workqueue users
i3c: master: Remove i3c_device_free_ibi from i3c_device_remove
i3c: mipi-i3c-hci-pci: Set d3cold_delay to 0 for Intel controllers
i3c: mipi-i3c-hci-pci: Add LTR support for Intel controllers
i3c: mipi-i3c-hci-pci: Add exit callback
i3c: mipi-i3c-hci-pci: Change callback parameter
i3c: mipi-i3c-hci-pci: Allocate a structure for mipi_i3c_hci_pci device information
i3c: mipi-i3c-hci-pci: Factor out intel_reset()
i3c: mipi-i3c-hci-pci: Factor out private registers ioremapping
i3c: mipi-i3c-hci-pci: Constify driver data
i3c: mipi-i3c-hci-pci: Use readl_poll_timeout()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is entirely SoC clk drivers.
The majority diff wise is for the new Rockchip and Qualcomm clk
drivers which is mostly lines and lines of data structures to describe
the clk hardware in these SoCs. Beyond those two, Renesas continues to
incrementally add clks to their SoC drivers, causing them to show up
higher in the diffstat this time because they added quite a few clks
all over the place.
Overall it is a semi-quiet release that has some new clk drivers and
the usual fixes for clock data that was wrong or missing and
non-critical cleanups that plug error paths or fix typos.
New Drivers:
- Qualcomm IPQ5424 Network Subsystem Clock Controller
- Qualcomm SM8750 Video Clock Controller
- Rockchip RV1126B and RK3506 clock drivers
- i.MX8ULP SIM LPAV clock driver
- Samsung ACPM (firmware interface) clock driver
- Altera Agilex5 clock driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (117 commits)
clk: keystone: fix compile testing
clk: keystone: syscon-clk: fix regmap leak on probe failure
clk: qcom: Mark camcc_sm7150_hws static
clk: samsung: exynos-clkout: Assign .num before accessing .hws
clk: rockchip: Add clock and reset driver for RK3506
dt-bindings: clock: rockchip: Add RK3506 clock and reset unit
clk: actions: Fix discarding const qualifier by 'container_of' macro
clk: spacemit: Set clk_hw_onecell_data::num before using flex array
clk: visconti: Add VIIF clocks
dt-bindings: clock: tmpv770x: Add VIIF clocks
dt-bindings: clock: tmpv770x: Remove definition of number of clocks
clk: visconti: Do not define number of clocks in bindings
clk: rockchip: Add clock controller for the RV1126B
dt-bindings: clock, reset: Add support for rv1126b
clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll()
clk: qcom: x1e80100-dispcc: Add USB4 router link resets
dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets
clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750
dt-bindings: clock: qcom: Add SM8750 video clock controller
clk: qcom: branch: Extend invert logic for branch2 mem clocks
...
|
|
Currently, kvfree_rcu_barrier() flushes RCU sheaves across all slab
caches when a cache is destroyed. This is unnecessary; only the RCU
sheaves belonging to the cache being destroyed need to be flushed.
As suggested by Vlastimil Babka, introduce a weaker form of
kvfree_rcu_barrier() that operates on a specific slab cache.
Factor out flush_rcu_sheaves_on_cache() from flush_all_rcu_sheaves() and
call it from flush_all_rcu_sheaves() and kvfree_rcu_barrier_on_cache().
Call kvfree_rcu_barrier_on_cache() instead of kvfree_rcu_barrier() on
cache destruction.
The performance benefit is evaluated on a 12 core 24 threads AMD Ryzen
5900X machine (1 socket), by loading slub_kunit module.
Before:
Total calls: 19
Average latency (us): 18127
Total time (us): 344414
After:
Total calls: 19
Average latency (us): 10066
Total time (us): 191264
Two performance regression have been reported:
- stress module loader test's runtime increases by 50-60% (Daniel)
- internal graphics test's runtime on Tegra234 increases by 35% (Jon)
They are fixed by this change.
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Fixes: ec66e0d59952 ("slab: add sheaf support for batching kfree_rcu() operations")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mm/1bda09da-93be-4737-aef0-d47f8c5c9301@suse.cz
Reported-and-tested-by: Daniel Gomez <da.gomez@samsung.com>
Closes: https://lore.kernel.org/linux-mm/0406562e-2066-4cf8-9902-b2b0616dd742@kernel.org
Reported-and-tested-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/linux-mm/e988eff6-1287-425e-a06c-805af5bbf262@nvidia.com
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20251207154148.117723-1-harry.yoo@oracle.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Pull 9p updates from Dominique Martinet:
- fix a bug with O_APPEND in cached mode causing data to be written
multiple times on server
- use kvmalloc for trans_fd to avoid problems with large msize and
fragmented memory This should hopefully be used in more transports
when time allows
- convert to new mount API
- minor cleanups
* tag '9p-for-6.19-rc1' of https://github.com/martinetd/linux:
9p: fix new mount API cache option handling
9p: fix cache/debug options printing in v9fs_show_options
9p: convert to the new mount API
9p: create a v9fs_context structure to hold parsed options
net/9p: move structures and macros to header files
fs/fs_parse: add back fsparam_u32hex
fs/9p: delete unnnecessary condition
fs/9p: Don't open remote file with APPEND mode when writeback cache is used
net/9p: cleanup: change p9_trans_module->def to bool
9p: Use kvmalloc for message buffers on supported transports
|
