| Age | Commit message (Collapse) | Author |
|
Pull shmem rename fixes from Al Viro:
"A couple of shmem rename fixes - recent regression from tree-in-dcache
series and older breakage from stable directory offsets stuff"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
shmem: fix recovery on rename failures
shmem_whiteout(): fix regression from tree-in-dcache series
|
|
maple_tree insertions can fail if we are seriously short on memory;
simple_offset_rename() does not recover well if it runs into that.
The same goes for simple_offset_rename_exchange().
Moreover, shmem_whiteout() expects that if it succeeds, the caller will
progress to d_move(), i.e. that shmem_rename2() won't fail past the
successful call of shmem_whiteout().
Not hard to fix, fortunately - mtree_store() can't fail if the index we
are trying to store into is already present in the tree as a singleton.
For simple_offset_rename_exchange() that's enough - we just need to be
careful about the order of operations.
For simple_offset_rename() solution is to preinsert the target into the
tree for new_dir; the rest can be done without any potentially failing
operations.
That preinsertion has to be done in shmem_rename2() rather than in
simple_offset_rename() itself - otherwise we'd need to deal with the
possibility of failure after successful shmem_whiteout().
Fixes: a2e459555c5f ("shmem: stable directory offsets")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Now that shmem_mknod() hashes the new dentry, d_rehash() in
shmem_whiteout() should be removed.
X-paperbag: brown
Reported-by: Hugh Dickins <hughd@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Tested-by: Hugh Dickins <hughd@google.com>
Fixes: 2313598222f9 ("convert ramfs and tmpfs")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"There are no significant series in this small merge. Please see the
individual changelogs for details"
[ Editor's note: it's mainly ocfs2 and a couple of random fixes ]
* tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memfd_luo: add CONFIG_SHMEM dependency
mm: shmem: avoid build warning for CONFIG_SHMEM=n
ocfs2: fix memory leak in ocfs2_merge_rec_left()
ocfs2: invalidate inode if i_mode is zero after block read
ocfs2: avoid -Wflex-array-member-not-at-end warning
ocfs2: convert remaining read-only checks to ocfs2_emergency_state
ocfs2: add ocfs2_emergency_state helper and apply to setattr
checkpatch: add uninitialized pointer with __free attribute check
args: fix documentation to reflect the correct numbers
ocfs2: fix kernel BUG in ocfs2_find_victim_chain
liveupdate: luo_core: fix redundant bound check in luo_ioctl()
ocfs2: validate inline xattr size and entry count in ocfs2_xattr_ibody_list
fs/fat: remove unnecessary wrapper fat_max_cache()
ocfs2: replace deprecated strcpy with strscpy
ocfs2: check tl_used after reading it from trancate log inode
liveupdate: luo_file: don't use invalid list iterator
|
|
The newly added 'flags' variable is unused and causes a warning if
CONFIG_SHMEM is disabled, since the shmem_acct_size() macro it is passed
into does nothing:
mm/shmem.c: In function '__shmem_file_setup':
mm/shmem.c:5816:23: error: unused variable 'flags' [-Werror=unused-variable]
5816 | unsigned long flags = (vm_flags & VM_NORESERVE) ? SHMEM_F_NORESERVE : 0;
| ^~~~~
Replace the two macros with equivalent inline functions to get the
argument checking.
Link: https://lkml.kernel.org/r/20251204102905.1048000-1-arnd@kernel.org
Fixes: 6ff1610ced56 ("mm: shmem: use SHMEM_F_* flags instead of VM_* flags")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: guoweikang <guoweikang.kernel@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "panic: sys_info: Refactor and fix a potential issue" (Andy Shevchenko)
fixes a build issue and does some cleanup in ib/sys_info.c
- "Implement mul_u64_u64_div_u64_roundup()" (David Laight)
enhances the 64-bit math code on behalf of a PWM driver and beefs up
the test module for these library functions
- "scripts/gdb/symbols: make BPF debug info available to GDB" (Ilya Leoshkevich)
makes BPF symbol names, sizes, and line numbers available to the GDB
debugger
- "Enable hung_task and lockup cases to dump system info on demand" (Feng Tang)
adds a sysctl which can be used to cause additional info dumping when
the hung-task and lockup detectors fire
- "lib/base64: add generic encoder/decoder, migrate users" (Kuan-Wei Chiu)
adds a general base64 encoder/decoder to lib/ and migrates several
users away from their private implementations
- "rbree: inline rb_first() and rb_last()" (Eric Dumazet)
makes TCP a little faster
- "liveupdate: Rework KHO for in-kernel users" (Pasha Tatashin)
reworks the KEXEC Handover interfaces in preparation for Live Update
Orchestrator (LUO), and possibly for other future clients
- "kho: simplify state machine and enable dynamic updates" (Pasha Tatashin)
increases the flexibility of KEXEC Handover. Also preparation for LUO
- "Live Update Orchestrator" (Pasha Tatashin)
is a major new feature targeted at cloud environments. Quoting the
cover letter:
This series introduces the Live Update Orchestrator, a kernel
subsystem designed to facilitate live kernel updates using a
kexec-based reboot. This capability is critical for cloud
environments, allowing hypervisors to be updated with minimal
downtime for running virtual machines. LUO achieves this by
preserving the state of selected resources, such as memory,
devices and their dependencies, across the kernel transition.
As a key feature, this series includes support for preserving
memfd file descriptors, which allows critical in-memory data, such
as guest RAM or any other large memory region, to be maintained in
RAM across the kexec reboot.
Mike Rappaport merits a mention here, for his extensive review and
testing work.
- "kexec: reorganize kexec and kdump sysfs" (Sourabh Jain)
moves the kexec and kdump sysfs entries from /sys/kernel/ to
/sys/kernel/kexec/ and adds back-compatibility symlinks which can
hopefully be removed one day
- "kho: fixes for vmalloc restoration" (Mike Rapoport)
fixes a BUG which was being hit during KHO restoration of vmalloc()
regions
* tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (139 commits)
calibrate: update header inclusion
Reinstate "resource: avoid unnecessary lookups in find_next_iomem_res()"
vmcoreinfo: track and log recoverable hardware errors
kho: fix restoring of contiguous ranges of order-0 pages
kho: kho_restore_vmalloc: fix initialization of pages array
MAINTAINERS: TPM DEVICE DRIVER: update the W-tag
init: replace simple_strtoul with kstrtoul to improve lpj_setup
KHO: fix boot failure due to kmemleak access to non-PRESENT pages
Documentation/ABI: new kexec and kdump sysfs interface
Documentation/ABI: mark old kexec sysfs deprecated
kexec: move sysfs entries to /sys/kernel/kexec
test_kho: always print restore status
kho: free chunks using free_page() instead of kfree()
selftests/liveupdate: add kexec test for multiple and empty sessions
selftests/liveupdate: add simple kexec-based selftest for LUO
selftests/liveupdate: add userspace API selftests
docs: add documentation for memfd preservation via LUO
mm: memfd_luo: allow preserving memfd
liveupdate: luo_file: add private argument to store runtime state
mm: shmem: export some functions to internal.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull persistent dentry infrastructure and conversion from Al Viro:
"Some filesystems use a kinda-sorta controlled dentry refcount leak to
pin dentries of created objects in dcache (and undo it when removing
those). A reference is grabbed and not released, but it's not actually
_stored_ anywhere.
That works, but it's hard to follow and verify; among other things, we
have no way to tell _which_ of the increments is intended to be an
unpaired one. Worse, on removal we need to decide whether the
reference had already been dropped, which can be non-trivial if that
removal is on umount and we need to figure out if this dentry is
pinned due to e.g. unlink() not done. Usually that is handled by using
kill_litter_super() as ->kill_sb(), but there are open-coded special
cases of the same (consider e.g. /proc/self).
Things get simpler if we introduce a new dentry flag
(DCACHE_PERSISTENT) marking those "leaked" dentries. Having it set
claims responsibility for +1 in refcount.
The end result this series is aiming for:
- get these unbalanced dget() and dput() replaced with new primitives
that would, in addition to adjusting refcount, set and clear
persistency flag.
- instead of having kill_litter_super() mess with removing the
remaining "leaked" references (e.g. for all tmpfs files that hadn't
been removed prior to umount), have the regular
shrink_dcache_for_umount() strip DCACHE_PERSISTENT of all dentries,
dropping the corresponding reference if it had been set. After that
kill_litter_super() becomes an equivalent of kill_anon_super().
Doing that in a single step is not feasible - it would affect too many
places in too many filesystems. It has to be split into a series.
This work has really started early in 2024; quite a few preliminary
pieces have already gone into mainline. This chunk is finally getting
to the meat of that stuff - infrastructure and most of the conversions
to it.
Some pieces are still sitting in the local branches, but the bulk of
that stuff is here"
* tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
d_make_discardable(): warn if given a non-persistent dentry
kill securityfs_recursive_remove()
convert securityfs
get rid of kill_litter_super()
convert rust_binderfs
convert nfsctl
convert rpc_pipefs
convert hypfs
hypfs: swich hypfs_create_u64() to returning int
hypfs: switch hypfs_create_str() to returning int
hypfs: don't pin dentries twice
convert gadgetfs
gadgetfs: switch to simple_remove_by_name()
convert functionfs
functionfs: switch to simple_remove_by_name()
functionfs: fix the open/removal races
functionfs: need to cancel ->reset_work in ->kill_sb()
functionfs: don't bother with ffs->ref in ffs_data_{opened,closed}()
functionfs: don't abuse ffs_data_closed() on fs shutdown
convert selinuxfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit ebb9aeb980e5 ("vfio/nvgrace-gpu:
register device memory for poison handling") because it looks
broken to me, I've asked for clarification - Linus ]
* tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm: fix vma_start_write_killable() signal handling
mm/swapfile: use plist_for_each_entry in __folio_throttle_swaprate
mm/swapfile: fix list iteration when next node is removed during discard
fs/proc/task_mmu.c: fix make_uffd_wp_huge_pte() huge pte handling
mm/kfence: add reboot notifier to disable KFENCE on shutdown
memcg: remove inc/dec_lruvec_kmem_state helpers
selftests/mm/uffd: initialize char variable to Null
mm: fix DEBUG_RODATA_TEST indentation in Kconfig
mm: introduce VMA flags bitmap type
tools/testing/vma: eliminate dependency on vma->__vm_flags
mm: simplify and rename mm flags function for clarity
mm: declare VMA flags by bit
zram: fix a spelling mistake
mm/page_alloc: optimize lowmem_reserve max lookup using its semantic monotonicity
mm/vmscan: skip increasing kswapd_failures when reclaim was boosted
pagemap: update BUDDY flag documentation
mm: swap: remove scan_swap_map_slots() references from comments
mm: swap: change swap_alloc_slow() to void
mm, swap: remove redundant comment for read_swap_cache_async
mm, swap: use SWP_SOLIDSTATE to determine if swap is rotational
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull folio updates from Christian Brauner:
"Add a new folio_next_pos() helper function that returns the file
position of the first byte after the current folio. This is a common
operation in filesystems when needing to know the end of the current
folio.
The helper is lifted from btrfs which already had its own version, and
is now used across multiple filesystems and subsystems:
- btrfs
- buffer
- ext4
- f2fs
- gfs2
- iomap
- netfs
- xfs
- mm
This fixes a long-standing bug in ocfs2 on 32-bit systems with files
larger than 2GiB. Presumably this is not a common configuration, but
the fix is backported anyway. The other filesystems did not have bugs,
they were just mildly inefficient.
This also introduce uoff_t as the unsigned version of loff_t. A recent
commit inadvertently changed a comparison from being unsigned (on
64-bit systems) to being signed (which it had always been on 32-bit
systems), leading to sporadic fstests failures.
Generally file sizes are restricted to being a signed integer, but in
places where -1 is passed to indicate "up to the end of the file", it
is convenient to have an unsigned type to ensure comparisons are
always unsigned regardless of architecture"
* tag 'vfs-6.19-rc1.folio' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: Add uoff_t
mm: Use folio_next_pos()
xfs: Use folio_next_pos()
netfs: Use folio_next_pos()
iomap: Use folio_next_pos()
gfs2: Use folio_next_pos()
f2fs: Use folio_next_pos()
ext4: Use folio_next_pos()
buffer: Use folio_next_pos()
btrfs: Use folio_next_pos()
filemap: Add folio_next_pos()
|
|
shmem_inode_acct_blocks(), shmem_recalc_inode(), and
shmem_add_to_page_cache() are used by shmem_alloc_and_add_folio(). This
functionality will be used by memfd LUO integration.
Link: https://lkml.kernel.org/r/20251125165850.3389713-13-pasha.tatashin@soleen.com
Signed-off-by: Pratyush Yadav <ptyadav@amazon.de>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Tested-by: David Matlack <dmatlack@google.com>
Cc: Aleksander Lobakin <aleksander.lobakin@intel.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: anish kumar <yesanishhere@gmail.com>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Chen Ridong <chenridong@huawei.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Daniel Wagner <wagi@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Jeffery <djeffery@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guixin Liu <kanie@linux.alibaba.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Matthew Maurer <mmaurer@google.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Myugnjoo Ham <myungjoo.ham@samsung.com>
Cc: Parav Pandit <parav@nvidia.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Samiullah Khawaja <skhawaja@google.com>
Cc: Song Liu <song@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: William Tu <witu@nvidia.com>
Cc: Yoann Congal <yoann.congal@smile.fr>
Cc: Zhu Yanjun <yanjun.zhu@linux.dev>
Cc: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To prepare a shmem inode for live update, its index -> folio mappings must
be serialized. Once the mappings are serialized, they cannot change since
it would cause the serialized data to become inconsistent. This can be
done by pinning the folios to avoid migration, and by making sure no
folios can be added to or removed from the inode.
While mechanisms to pin folios already exist, the only way to stop folios
being added or removed are the grow and shrink file seals. But file seals
come with their own semantics, one of which is that they can't be removed.
This doesn't work with liveupdate since it can be cancelled or error out,
which would need the seals to be removed and the file's normal
functionality to be restored.
Introduce SHMEM_F_MAPPING_FROZEN to indicate this instead. It is internal
to shmem and is not directly exposed to userspace. It functions similar
to F_SEAL_GROW | F_SEAL_SHRINK, but additionally disallows hole punching,
and can be removed.
Link: https://lkml.kernel.org/r/20251125165850.3389713-12-pasha.tatashin@soleen.com
Signed-off-by: Pratyush Yadav <ptyadav@amazon.de>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Tested-by: David Matlack <dmatlack@google.com>
Cc: Aleksander Lobakin <aleksander.lobakin@intel.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: anish kumar <yesanishhere@gmail.com>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Chen Ridong <chenridong@huawei.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Daniel Wagner <wagi@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Jeffery <djeffery@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guixin Liu <kanie@linux.alibaba.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Matthew Maurer <mmaurer@google.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Myugnjoo Ham <myungjoo.ham@samsung.com>
Cc: Parav Pandit <parav@nvidia.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Samiullah Khawaja <skhawaja@google.com>
Cc: Song Liu <song@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: William Tu <witu@nvidia.com>
Cc: Yoann Congal <yoann.congal@smile.fr>
Cc: Zhu Yanjun <yanjun.zhu@linux.dev>
Cc: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
shmem_inode_info::flags can have the VM flags VM_NORESERVE and VM_LOCKED.
These are used to suppress pre-accounting or to lock the pages in the
inode respectively. Using the VM flags directly makes it difficult to add
shmem-specific flags that are unrelated to VM behavior since one would
need to find a VM flag not used by shmem and re-purpose it.
Introduce SHMEM_F_NORESERVE and SHMEM_F_LOCKED which represent the same
information, but their bits are independent of the VM flags. Callers can
still pass VM_NORESERVE to shmem_get_inode(), but it gets transformed to
the shmem-specific flag internally.
No functional changes intended.
Link: https://lkml.kernel.org/r/20251125165850.3389713-11-pasha.tatashin@soleen.com
Signed-off-by: Pratyush Yadav <ptyadav@amazon.de>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Tested-by: David Matlack <dmatlack@google.com>
Cc: Aleksander Lobakin <aleksander.lobakin@intel.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: anish kumar <yesanishhere@gmail.com>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Chen Ridong <chenridong@huawei.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Daniel Wagner <wagi@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Jeffery <djeffery@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guixin Liu <kanie@linux.alibaba.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Matthew Maurer <mmaurer@google.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Myugnjoo Ham <myungjoo.ham@samsung.com>
Cc: Parav Pandit <parav@nvidia.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Samiullah Khawaja <skhawaja@google.com>
Cc: Song Liu <song@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: William Tu <witu@nvidia.com>
Cc: Yoann Congal <yoann.congal@smile.fr>
Cc: Zhu Yanjun <yanjun.zhu@linux.dev>
Cc: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In a recent commit, I inadvertently changed a comparison from being an
unsigned comparison (on 64-bit systems) to being a signed comparison
(which it had always been on 32-bit systems). This led to a sporadic
fstests failure.
To make sure this comparison is always unsigned, introduce a new type,
uoff_t which is the unsigned version of loff_t. Generally file sizes
are restricted to being a signed integer, but in these two places it is
convenient to pass -1 to indicate "up to the end of the file".
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://patch.msgid.link/20251123220518.1447261-1-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
__lruvec_stat_mod_folio() is already safe against irqs, so there is no
need to have a separate interface (i.e. lruvec_stat_mod_folio) which
wraps calls to it with irq disabling and reenabling. Let's rename
__lruvec_stat_mod_folio() to lruvec_stat_mod_folio().
Link: https://lkml.kernel.org/r/20251110232008.1352063-5-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After commit 69e0a3b49003 ("mm: shmem: fix the strategy for the tmpfs
'huge=' options"), we have fixed the large order allocation strategy for
tmpfs, which always tries PMD-sized large folios first, and if that fails,
falls back to smaller large folios. For tmpfs large folio allocation via
mmap(), we should maintain the same strategy as well. Let's unify the
large order allocation strategy for tmpfs.
There is no functional change for large folio allocation of anonymous shmem.
Link: https://lkml.kernel.org/r/283a0bdfd6ac7aa334a491422bcae70919c572bd.1763008453.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The kernel maintains leaf page table entries which contain either:
The kernel maintains leaf page table entries which contain either:
- Nothing ('none' entries)
- Present entries*
- Everything else that will cause a fault which the kernel handles
* Present entries are either entries the hardware can navigate without page
fault or special cases like NUMA hint protnone or PMD with cleared
present bit which contain hardware-valid entries modulo the present bit.
In the 'everything else' group we include swap entries, but we also
include a number of other things such as migration entries, device private
entries and marker entries.
Unfortunately this 'everything else' group expresses everything through a
swp_entry_t type, and these entries are referred to swap entries even
though they may well not contain a... swap entry.
This is compounded by the rather mind-boggling concept of a non-swap swap
entry (checked via non_swap_entry()) and the means by which we twist and
turn to satisfy this.
This patch lays the foundation for reducing this confusion.
We refer to 'everything else' as a 'software-define leaf entry' or
'softleaf'. for short And in fact we scoop up the 'none' entries into
this concept also so we are left with:
- Present entries.
- Softleaf entries (which may be empty).
This allows for radical simplification across the board - one can simply
convert any leaf page table entry to a leaf entry via softleaf_from_pte().
If the entry is present, we return an empty leaf entry, so it is assumed
the caller is aware that they must differentiate between the two
categories of page table entries, checking for the former via
pte_present().
As a result, we can eliminate a number of places where we would otherwise
need to use predicates to see if we can proceed with leaf page table entry
conversion and instead just go ahead and do it unconditionally.
We do so where we can, adjusting surrounding logic as necessary to
integrate the new softleaf_t logic as far as seems reasonable at this
stage.
We typedef swp_entry_t to softleaf_t for the time being until the
conversion can be complete, meaning everything remains compatible
regardless of which type is used. We will eventually remove swp_entry_t
when the conversion is complete.
We introduce a new header file to keep things clear - leafops.h - this
imports swapops.h so can direct replace swapops imports without issue, and
we do so in all the files that require it.
Additionally, add new leafops.h file to core mm maintainers entry.
Link: https://lkml.kernel.org/r/c879383aac77d96a03e4d38f7daba893cd35fc76.1762812360.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yuanchu Xie <yuanchu@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix unitialized variable in statmount_string()
- Fix hostfs mounting when passing host root during boot
- Fix dynamic lookup to fail on cell lookup failure
- Fix missing file type when reading bfs inodes from disk
- Enforce checking of sb_min_blocksize() calls and update all callers
accordingly
- Restore write access before closing files opened by open_exec() in
binfmt_misc
- Always freeze efivarfs during suspend/hibernate cycles
- Fix statmount()'s and listmount()'s grab_requested_mnt_ns() helper to
actually allow mount namespace file descriptor in addition to mount
namespace ids
- Fix tmpfs remount when noswap is specified
- Switch Landlock to iput_not_last() to remove false-positives from
might_sleep() annotations in iput()
- Remove dead node_to_mnt_ns() code
- Ensure that per-queue kobjects are successfully created
* tag 'vfs-6.18-rc7.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
landlock: fix splats from iput() after it started calling might_sleep()
fs: add iput_not_last()
shmem: fix tmpfs reconfiguration (remount) when noswap is set
fs/namespace: correctly handle errors returned by grab_requested_mnt_ns
power: always freeze efivarfs
binfmt_misc: restore write access before closing files opened by open_exec()
block: add __must_check attribute to sb_min_blocksize()
virtio-fs: fix incorrect check for fsvq->kobj
xfs: check the return value of sb_min_blocksize() in xfs_fs_fill_super
isofs: check the return value of sb_min_blocksize() in isofs_fill_super
exfat: check return value of sb_min_blocksize in exfat_read_boot_sector
vfat: fix missing sb_min_blocksize() return value checks
mnt: Remove dead code which might prevent from building
bfs: Reconstruct file type when loading from disk
afs: Fix dynamic lookup to fail on cell lookup failure
hostfs: Fix only passing host root in boot stage with new mount
fs: Fix uninitialized 'offp' in statmount_string()
|
|
Allow to override defaults for shemem and tmpfs at config time. This is
consistent with how transparent hugepages can be configured.
Same results can be achieved with the existing
'transparent_hugepage_shmem' and 'transparent_hugepage_tmpfs' settings in
the kernel command line, but it is more convenient to define basic
settings at config time instead of changing kernel command line later.
Defaults for shmem and tmpfs were not changed. They are remained the same
as before: 'never' for both cases. Options 'deny' and 'force' are omitted
intentionally since these are special values and supposed to be used for
emergencies or testing and are not expected to be permanent ones.
Primary motivation for adding config option is to enable policy
enforcement at build time. In large-scale production environments (Meta's
for example), the kernel configuration is often maintained centrally close
to the kernel code itself and owned by the kernel engineers, while boot
parameters are managed independently (e.g. by provisioning systems). In
such setups, the kernel build defines the supported and expected behavior
in a single place, but there is no reliable or uniform control over the
kernel command line options.
A build-time default allows kernel integrators to enforce a predictable
hugepage policy for shmem/tmpfs on a base layer, ensuring reproducible
behavior and avoiding configuration drift caused by possible boot-time
differences.
In short, primary benefit is mostly operational: it provides a way to
codify preferred policy in the kernel configuration, which is versioned,
reviewed, and tested as part of the kernel build process, rather than
depending on potentially variable boot parameters.
[d@ilvokhin.com: v2]
Link: https://lkml.kernel.org/r/aQECPpjd-fU_TC79@shell.ilvokhin.com
Link: https://lkml.kernel.org/r/aPpv8sAa2sYgNu3L@shell.ilvokhin.com
Signed-off-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Kiryl Shutsemau <kas@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We no longer need this GFP parameter after commit 8578e0c00dcf ("mm, swap:
use the swap table for the swap cache and switch API"). Before that
commit the GFP parameter is already almost identical for all callers, so
nothing changed by that commit. Swap table just moved the GFP to lower
layer and make it more defined and changes depend on atomic or sleep
allocation.
Now this parameter is no longer used, just remove it. No behavior change.
Link: https://lkml.kernel.org/r/20251024-swap-clean-after-swap-table-p1-v2-3-a709469052e7@tencent.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Chris Li <chrisl@kernel.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add the ability to set up a shared anonymous mapping based on a VMA
descriptor rather than a VMA.
This is a prerequisite for converting to the char mm driver to use the
mmap_prepare hook.
Link: https://lkml.kernel.org/r/d9181517a7e3d6b014a5697c6990d3722c2c9fcd.1760959442.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Chatre, Reinette <reinette.chatre@intel.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "expand mmap_prepare functionality, port more users", v5.
Since commit c84bf6dd2b83 ("mm: introduce new .mmap_prepare() file
callback"), The f_op->mmap hook has been deprecated in favour of
f_op->mmap_prepare.
This was introduced in order to make it possible for us to eventually
eliminate the f_op->mmap hook which is highly problematic as it allows
drivers and filesystems raw access to a VMA which is not yet correctly
initialised.
This hook also introduced complexity for the memory mapping operation, as
we must correctly unwind what we do should an error arises.
Overall this interface being so open has caused significant problems for
us, including security issues, it is important for us to simply eliminate
this as a source of problems.
Therefore this series continues what was established by extending the
functionality further to permit more drivers and filesystems to use
mmap_prepare.
We start by udpating some existing users who can use the mmap_prepare
functionality as-is.
We then introduce the concept of an mmap 'action', which a user, on
mmap_prepare, can request to be performed upon the VMA:
* Nothing - default, we're done
* Remap PFN - perform PFN remap with specified parameters
* I/O remap PFN - perform I/O PFN remap with specified parameters
By setting the action in mmap_prepare, this allows us to dynamically
decide what to do next, so if a driver/filesystem needs to determine
whether to e.g. remap or use a mixed map, it can do so then change which
is done.
This significantly expands the capabilities of the mmap_prepare hook,
while maintaining as much control as possible in the mm logic.
We split [io_]remap_pfn_range*() functions which allow for PFN remap (a
typical mapping prepopulation operation) split between a prepare/complete
step, as well as io_mremap_pfn_range_prepare, complete for a similar
purpose.
From there we update various mm-adjacent logic to use this functionality
as a first set of changes.
We also add success and error hooks for post-action processing for e.g.
output debug log on success and filtering error codes.
This patch (of 15):
This simply assigns the vm_ops so is easily updated - do so.
Link: https://lkml.kernel.org/r/cover.1760959441.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/7b93b1e89028e39507dac5ca01991e1374d5bbe8.1760959442.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Chatre, Reinette <reinette.chatre@intel.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mm_get_unmapped_area() is a wrapper around arch_get_unmapped_area() /
arch_get_unmapped_area_topdown(), both of which search current->mm for
some free space. Neither take an mm_struct - they implicitly operate on
current->mm.
But the wrapper takes an mm_struct and uses it to decide whether to search
bottom up or top down. All callers pass in current->mm for this, so
everything is working consistently. But it feels like an accident waiting
to happen; eventually someone will call that function with a different mm,
expecting to find free space in it, but what gets returned is free space
in the current mm.
So let's simplify by removing the parameter and have the wrapper use
current->mm to decide which end to start at. Now everything is consistent
and self-documenting.
Link: https://lkml.kernel.org/r/20251003155306.2147572-1-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Quite a bit is already done by infrastructure changes (simple_link(),
simple_unlink()) - all that is left is replacing d_instantiate() +
pinning dget() (in ->symlink() and ->mknod()) with d_make_persistent(),
and, in case of shmem, using simple_unlink() and simple_link() in
->unlink() and ->link() resp., instead of open-coding those there.
Since d_make_persistent() accepts (and hashes) unhashed ones, shmem
situation gets simpler - we no longer care whether ->lookup() has hashed
the sucker.
With that done, we don't need kill_litter_super() for these filesystems
anymore - by the umount time all remaining dentries will be marked
persistent and kill_litter_super() will boil down to call of
kill_anon_super().
The same goes for devtmpfs and rootfs - they are handled by
ramfs or by shmem, depending upon config.
NB: strictly speaking, both devtmpfs and rootfs ought to use
ramfs_kill_sb() if they end up using ramfs; that's a separate
story and the only impact of "just use kill_{litter,anon}_super()"
is that we fail to free their sb->s_fs_info... on reboot.
That's orthogonal to the changes in this series - kill_litter_super()
is identical to kill_anon_super() for those at this point.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
In systemd we're trying to switch the internal credentials setup logic
to new mount API [1], and I noticed fsconfig(FSCONFIG_CMD_RECONFIGURE)
consistently fails on tmpfs with noswap option. This can be trivially
reproduced with the following:
```
int fs_fd = fsopen("tmpfs", 0);
fsconfig(fs_fd, FSCONFIG_SET_FLAG, "noswap", NULL, 0);
fsconfig(fs_fd, FSCONFIG_CMD_CREATE, NULL, NULL, 0);
fsmount(fs_fd, 0, 0);
fsconfig(fs_fd, FSCONFIG_CMD_RECONFIGURE, NULL, NULL, 0); <------ EINVAL
```
After some digging the culprit is shmem_reconfigure() rejecting
!(ctx->seen & SHMEM_SEEN_NOSWAP) && sbinfo->noswap, which is bogus
as ctx->seen serves as a mask for whether certain options are touched
at all. On top of that, noswap option doesn't use fsparam_flag_no,
hence it's not really possible to "reenable" swap to begin with.
Drop the check and redundant SHMEM_SEEN_NOSWAP flag.
[1] https://github.com/systemd/systemd/pull/39637
Fixes: 2c6efe9cf2d7 ("shmem: add support to ignore swap")
Signed-off-by: Mike Yuan <me@yhndnzj.com>
Link: https://patch.msgid.link/20251108190930.440685-1-me@yhndnzj.com
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The order check and fallback loop is updating the index value on every
loop. This will cause the index to be wrongly aligned by a larger value
while the loop shrinks the order.
This may result in inserting and returning a folio of the wrong index and
cause data corruption with some userspace workloads [1].
[kasong@tencent.com: introduce a temporary variable to improve code]
Link: https://lkml.kernel.org/r/20251023065913.36925-1-ryncsn@gmail.com
Link: https://lore.kernel.org/linux-mm/CAMgjq7DqgAmj25nDUwwu1U2cSGSn8n4-Hqpgottedy0S6YYeUw@mail.gmail.com/ [1]
Link: https://lkml.kernel.org/r/20251022105719.18321-1-ryncsn@gmail.com
Link: https://lore.kernel.org/linux-mm/CAMgjq7DqgAmj25nDUwwu1U2cSGSn8n4-Hqpgottedy0S6YYeUw@mail.gmail.com/ [1]
Fixes: e7a2ab7b3bb5 ("mm: shmem: add mTHP support for anonymous shmem")
Closes: https://lore.kernel.org/linux-mm/CAMgjq7DqgAmj25nDUwwu1U2cSGSn8n4-Hqpgottedy0S6YYeUw@mail.gmail.com/
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is one instruction more efficient than open-coding folio_pos() +
folio_size(). It's the equivalent of (x + y) << z rather than
x << z + y << z.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://patch.msgid.link/20251024170822.1427218-11-willy@infradead.org
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
|
|
After commit 93c0476e7057 ("mm/shmem, swap: rework swap entry and index
calculation for large swapin"), xas_get_order() will never return a
non-zero value for `entry_order` in shmem_split_large_entry(). As a
result, the local variable `entry_order` is effectively unused.
Clean up the code by removing `entry_order` and directly using
`cur_order`. This change is purely a refactor and has no functional
impact.
No functional change intended.
Link: https://lkml.kernel.org/r/20250908062614.89880-1-liu.yun@linux.dev
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kairui Song <kasong@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce basic swap table infrastructures, which are now just a
fixed-sized flat array inside each swap cluster, with access wrappers.
Each cluster contains a swap table of 512 entries. Each table entry is an
opaque atomic long. It could be in 3 types: a shadow type (XA_VALUE), a
folio type (pointer), or NULL.
In this first step, it only supports storing a folio or shadow, and it is
a drop-in replacement for the current swap cache. Convert all swap cache
users to use the new sets of APIs. Chris Li has been suggesting using a
new infrastructure for swap cache for better performance, and that idea
combined well with the swap table as the new backing structure. Now the
lock contention range is reduced to 2M clusters, which is much smaller
than the 64M address_space. And we can also drop the multiple
address_space design.
All the internal works are done with swap_cache_get_* helpers. Swap cache
lookup is still lock-less like before, and the helper's contexts are same
with original swap cache helpers. They still require a pin on the swap
device to prevent the backing data from being freed.
Swap cache updates are now protected by the swap cluster lock instead of
the XArray lock. This is mostly handled internally, but new
__swap_cache_* helpers require the caller to lock the cluster. So, a few
new cluster access and locking helpers are also introduced.
A fully cluster-based unified swap table can be implemented on top of this
to take care of all count tracking and synchronization work, with dynamic
allocation. It should reduce the memory usage while making the
performance even better.
Link: https://lkml.kernel.org/r/20250916160100.31545-12-ryncsn@gmail.com
Co-developed-by: Chris Li <chrisl@kernel.org>
Signed-off-by: Chris Li <chrisl@kernel.org>
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Chris Li <chrisl@kernel.org>
Suggested-by: Chris Li <chrisl@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: kernel test robot <oliver.sang@intel.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are currently three swap cache users that are trying to replace an
existing folio with a new one: huge memory splitting, migration, and shmem
replacement. What they are doing is quite similar.
Introduce a common helper for this. In later commits, this can be easily
switched to use the swap table by updating this helper.
The newly added helper also makes the swap cache API better defined, and
make debugging easier by adding a few more debug checks.
Migration and shmem replace are meant to clone the folio, including
content, swap entry value, and flags. And splitting will adjust each sub
folio's swap entry according to order, which could be non-uniform in the
future. So document it clearly that it's the caller's responsibility to
set up the new folio's swap entries and flags before calling the helper.
The helper will just follow the new folio's entry value.
This also prepares for replacing high-order folios in the swap cache.
Currently, only splitting to order 0 is allowed for swap cache folios.
Using the new helper, we can handle high-order folio splitting better.
Link: https://lkml.kernel.org/r/20250916160100.31545-11-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Chris Li <chrisl@kernel.org>
Suggested-by: Chris Li <chrisl@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: kernel test robot <oliver.sang@intel.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Shmem may replace a folio in the swap cache if the cached one doesn't fit
the swapin's GFP zone. When doing so, shmem has already double checked
that the swap cache folio is locked, still has the swap cache flag set,
and contains the wanted swap entry. So it is impossible to fail due to an
XArray mismatch. There is even a comment for that.
Delete the defensive error handling path, and add a WARN_ON instead: if
that happened, something has broken the basic principle of how the swap
cache works, we should catch and fix that.
Link: https://lkml.kernel.org/r/20250916160100.31545-10-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Suggested-by: Chris Li <chrisl@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: kernel test robot <oliver.sang@intel.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In preparation for replacing the swap cache backend with the swap table,
clean up and add proper kernel doc for all swap cache APIs. Now all swap
cache APIs are well-defined with consistent names.
No feature change, only renaming and documenting.
Link: https://lkml.kernel.org/r/20250916160100.31545-9-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Chris Li <chrisl@kernel.org>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Suggested-by: Chris Li <chrisl@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: kernel test robot <oliver.sang@intel.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The swap cache lookup helper swap_cache_get_folio currently does readahead
updates as well, so callers that are not doing swapin from any VMA or
mapping are forced to reuse filemap helpers instead, and have to access
the swap cache space directly.
So decouple readahead update with swap cache lookup. Move the readahead
update part into a standalone helper. Let the caller call the readahead
update helper if they do readahead. And convert all swap cache lookups to
use swap_cache_get_folio.
After this commit, there are only three special cases for accessing swap
cache space now: huge memory splitting, migration, and shmem replacing,
because they need to lock the XArray. The following commits will wrap
their accesses to the swap cache too, with special helpers.
And worth noting, currently dropbehind is not supported for anon folio,
and we will never see a dropbehind folio in swap cache. The unified
helper can be updated later to handle that.
While at it, add proper kernedoc for touched helpers.
No functional change.
Link: https://lkml.kernel.org/r/20250916160100.31545-3-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Chris Li <chrisl@kernel.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Chris Li <chrisl@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: kernel test robot <oliver.sang@intel.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After commit acd7ccb284b8 ("mm: shmem: add large folio support for
tmpfs"), we have extended tmpfs to allow any sized large folios, rather
than just PMD-sized large folios.
The strategy discussed previously was:
: Considering that tmpfs already has the 'huge=' option to control the
: PMD-sized large folios allocation, we can extend the 'huge=' option to
: allow any sized large folios. The semantics of the 'huge=' mount option
: are:
:
: huge=never: no any sized large folios
: huge=always: any sized large folios
: huge=within_size: like 'always' but respect the i_size
: huge=advise: like 'always' if requested with madvise()
:
: Note: for tmpfs mmap() faults, due to the lack of a write size hint, still
: allocate the PMD-sized huge folios if huge=always/within_size/advise is
: set.
:
: Moreover, the 'deny' and 'force' testing options controlled by
: '/sys/kernel/mm/transparent_hugepage/shmem_enabled', still retain the same
: semantics. The 'deny' can disable any sized large folios for tmpfs, while
: the 'force' can enable PMD sized large folios for tmpfs.
This means that when tmpfs is mounted with 'huge=always' or
'huge=within_size', tmpfs will allow getting a highest order hint based on
the size of write() and fallocate() paths. It will then try each
allowable large order, rather than continually attempting to allocate
PMD-sized large folios as before.
However, this might break some user scenarios for those who want to use
PMD-sized large folios, such as the i915 driver which did not supply a
write size hint when allocating shmem [1].
Moreover, Hugh also complained that this will cause a regression in userspace
with 'huge=always' or 'huge=within_size'.
So, let's revisit the strategy for tmpfs large page allocation. A simple fix
would be to always try PMD-sized large folios first, and if that fails, fall
back to smaller large folios. This approach differs from the strategy for
large folio allocation used by other file systems, however, tmpfs is somewhat
different from other file systems, as quoted from David's opinion:
: There were opinions in the past that tmpfs should just behave like any
: other fs, and I think that's what we tried to satisfy here: use the write
: size as an indication.
:
: I assume there will be workloads where either approach will be beneficial.
: I also assume that workloads that use ordinary fs'es could benefit from
: the same strategy (start with PMD), while others will clearly not.
Link: https://lkml.kernel.org/r/10e7ac6cebe6535c137c064d5c5a235643eebb4a.1756888965.git.baolin.wang@linux.alibaba.com
Link: https://lore.kernel.org/lkml/0d734549d5ed073c80b11601da3abdd5223e1889.1753689802.git.baolin.wang@linux.alibaba.com/ [1]
Fixes: acd7ccb284b8 ("mm: shmem: add large folio support for tmpfs")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: establish const-correctness for pointer parameters", v6.
This series is to improved const-correctness in the low-level
memory-management subsystem, which provides a basis for further
constification further up the call stack (e.g. filesystems).
I started this work when I tried to constify the Ceph filesystem code, but
found that to be impossible because many "mm" functions accept non-const
pointers, even though they modify nothing.
This patch (of 12):
We select certain test functions which either invoke each other, functions
that are already const-ified, or no further functions.
It is therefore relatively trivial to const-ify them, which provides a
basis for further const-ification further up the call stack.
Link: https://lkml.kernel.org/r/20250901205021.3573313-1-max.kellermann@ionos.com
Link: https://lkml.kernel.org/r/20250901205021.3573313-2-max.kellermann@ionos.com
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Zankel <chris@zankel.net>
Cc: David Rientjes <rientjes@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Bottomley <james.bottomley@HansenPartnership.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Nysal Jan K.A" <nysal@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
generic_delete_inode() is rather misleading for what the routine is
doing. inode_just_drop() should be much clearer.
The new naming is inconsistent with generic_drop_inode(), so rename that
one as well with inode_ as the suffix.
No functional changes.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We've got the number of pages in the folio earlier, thus remove the redundant
folio_nr_pages() call.
Link: https://lkml.kernel.org/r/67c80182ebd949e3894908e01e224697c143aabb.1756200587.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is more straightforward to use the term `folio'. No functional changes.
Link: https://lkml.kernel.org/r/a2d39608d99cba1130cacd9cffbafc6949193c08.1756200587.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now tmpfs enables i_version by default and tmpfs does not modify it. But
SB_I_VERSION can also be modified via sb_flags, and reconfigure_super()
always overwrites the existing flags with the latest ones. This means
that if tmpfs is remounted without specifying iversion, the default
i_version will be unexpectedly disabled.
To ensure iversion remains enabled, SB_I_VERSION is now always set for
fc->sb_flags in shmem_init_fs_context(), instead of for sb->s_flags in
shmem_fill_super().
Link: https://lkml.kernel.org/r/20250819061803.1496443-1-libaokun@huaweicloud.com
Fixes: 36f05cab0a2c ("tmpfs: add support for an i_version counter")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's allow for making MADV_COLLAPSE succeed on areas that neither have
VM_HUGEPAGE nor VM_NOHUGEPAGE when we have THP disabled unless explicitly
advised (PR_THP_DISABLE_EXCEPT_ADVISED).
MADV_COLLAPSE is a clear advice that we want to collapse.
Note that we still respect the VM_NOHUGEPAGE flag, just like
MADV_COLLAPSE always does. So consequently, MADV_COLLAPSE is now only
refused on VM_NOHUGEPAGE with PR_THP_DISABLE_EXCEPT_ADVISED,
including for shmem.
Link: https://lkml.kernel.org/r/20250815135549.130506-4-usamaarif642@gmail.com
Co-developed-by: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yafang <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "mseal cleanups" (Lorenzo Stoakes)
Some mseal cleaning with no intended functional change.
- "Optimizations for khugepaged" (David Hildenbrand)
Improve khugepaged throughput by batching PTE operations for large
folios. This gain is mainly for arm64.
- "x86: enable EXECMEM_ROX_CACHE for ftrace and kprobes" (Mike Rapoport)
A bugfix, additional debug code and cleanups to the execmem code.
- "mm/shmem, swap: bugfix and improvement of mTHP swap in" (Kairui Song)
Bugfixes, cleanups and performance improvememnts to the mTHP swapin
code"
* tag 'mm-stable-2025-08-03-12-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (38 commits)
mm: mempool: fix crash in mempool_free() for zero-minimum pools
mm: correct type for vmalloc vm_flags fields
mm/shmem, swap: fix major fault counting
mm/shmem, swap: rework swap entry and index calculation for large swapin
mm/shmem, swap: simplify swapin path and result handling
mm/shmem, swap: never use swap cache and readahead for SWP_SYNCHRONOUS_IO
mm/shmem, swap: tidy up swap entry splitting
mm/shmem, swap: tidy up THP swapin checks
mm/shmem, swap: avoid redundant Xarray lookup during swapin
x86/ftrace: enable EXECMEM_ROX_CACHE for ftrace allocations
x86/kprobes: enable EXECMEM_ROX_CACHE for kprobes allocations
execmem: drop writable parameter from execmem_fill_trapping_insns()
execmem: add fallback for failures in vmalloc(VM_ALLOW_HUGE_VMAP)
execmem: move execmem_force_rw() and execmem_restore_rox() before use
execmem: rework execmem_cache_free()
execmem: introduce execmem_alloc_rw()
execmem: drop unused execmem_update_copy()
mm: fix a UAF when vma->mm is freed after vma->vm_refcnt got dropped
mm/rmap: add anon_vma lifetime debug check
mm: remove mm/io-mapping.c
...
|
|
If the swapin failed, don't update the major fault count. There is a long
existing comment for doing it this way, now with previous cleanups, we can
finally fix it.
Link: https://lkml.kernel.org/r/20250728075306.12704-9-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Instead of calculating the swap entry differently in different swapin
paths, calculate it early before the swap cache lookup and use that for
the lookup and later swapin. And after swapin have brought a folio,
simply round it down against the size of the folio.
This is simple and effective enough to verify the swap value. A folio's
swap entry is always aligned by its size. Any kind of parallel split or
race is acceptable because the final shmem_add_to_page_cache ensures that
all entries covered by the folio are correct, and thus there will be no
data corruption.
This also prevents false positive cache lookup. If a shmem read request's
index points to the middle of a large swap entry, previously, shmem will
try the swap cache lookup using the large swap entry's starting value
(which is the first sub swap entry of this large entry). This will lead
to false positive lookup results if only the first few swap entries are
cached but the actual requested swap entry pointed by the index is
uncached. This is not a rare event, as swap readahead always tries to
cache order 0 folios when possible.
And this shouldn't cause any increased repeated faults. Instead, no
matter how the shmem mapping is split in parallel, as long as the mapping
still contains the right entries, the swapin will succeed.
The final object size and stack usage are also reduced due to simplified
code:
./scripts/bloat-o-meter mm/shmem.o.old mm/shmem.o
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-145 (-145)
Function old new delta
shmem_swapin_folio 4056 3911 -145
Total: Before=33242, After=33097, chg -0.44%
Stack usage (Before vs After):
mm/shmem.c:2314:12:shmem_swapin_folio 264 static
mm/shmem.c:2314:12:shmem_swapin_folio 256 static
And while at it, round down the index too if swap entry is round down.
The index is used either for folio reallocation or confirming the mapping
content. In either case, it should be aligned with the swap folio.
Link: https://lkml.kernel.org/r/20250728075306.12704-8-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Slightly tidy up the different handling of swap in and error handling for
SWP_SYNCHRONOUS_IO and non-SWP_SYNCHRONOUS_IO devices. Now swapin will
always use either shmem_swap_alloc_folio or shmem_swapin_cluster, then
check the result.
Simplify the control flow and avoid a redundant goto label.
Link: https://lkml.kernel.org/r/20250728075306.12704-7-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For SWP_SYNCHRONOUS_IO devices, if a cache bypassing THP swapin failed due
to reasons like memory pressure, partially conflicting swap cache or ZSWAP
enabled, shmem will fallback to cached order 0 swapin.
Right now the swap cache still has a non-trivial overhead, and readahead
is not helpful for SWP_SYNCHRONOUS_IO devices, so we should always skip
the readahead and swap cache even if the swapin falls back to order 0.
So handle the fallback logic without falling back to the cached read.
Link: https://lkml.kernel.org/r/20250728075306.12704-6-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Instead of keeping different paths of splitting the entry before the swap
in start, move the entry splitting after the swapin has put the folio in
swap cache (or set the SWAP_HAS_CACHE bit). This way we only need one
place and one unified way to split the large entry. Whenever swapin
brought in a folio smaller than the shmem swap entry, split the entry and
recalculate the entry and index for verification.
This removes duplicated codes and function calls, reduces LOC, and the
split is less racy as it's guarded by swap cache now. So it will have a
lower chance of repeated faults due to raced split. The compiler is also
able to optimize the coder further:
bloat-o-meter results with GCC 14:
With DEBUG_SECTION_MISMATCH (-fno-inline-functions-called-once):
./scripts/bloat-o-meter mm/shmem.o.old mm/shmem.o
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-143 (-143)
Function old new delta
shmem_swapin_folio 2358 2215 -143
Total: Before=32933, After=32790, chg -0.43%
With !DEBUG_SECTION_MISMATCH:
add/remove: 0/1 grow/shrink: 1/0 up/down: 1069/-749 (320)
Function old new delta
shmem_swapin_folio 2871 3940 +1069
shmem_split_large_entry.isra 749 - -749
Total: Before=32806, After=33126, chg +0.98%
Since shmem_split_large_entry is only called in one place now. The
compiler will either generate more compact code, or inlined it for
better performance.
Link: https://lkml.kernel.org/r/20250728075306.12704-5-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move all THP swapin related checks under CONFIG_TRANSPARENT_HUGEPAGE, so
they will be trimmed off by the compiler if not needed.
And add a WARN if shmem sees a order > 0 entry when
CONFIG_TRANSPARENT_HUGEPAGE is disabled, that should never happen unless
things went very wrong.
There should be no observable feature change except the new added WARN.
Link: https://lkml.kernel.org/r/20250728075306.12704-4-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/shmem, swap: bugfix and improvement of mTHP swap in", v6.
The current THP swapin path have several problems. It may potentially
hang, may cause redundant faults due to false positive swap cache lookup,
and it issues redundant Xarray walks. !CONFIG_TRANSPARENT_HUGEPAGE builds
may also contain unnecessary THP checks.
This series fixes all of the mentioned issues, the code should be more
robust and prepared for the swap table series. Now 4 walks is reduced to
3 (get order & confirm, confirm, insert folio),
!CONFIG_TRANSPARENT_HUGEPAGE build overhead is also minimized, and comes
with a sanity check now.
The performance is slightly better after this series, sequential swap in
of 24G data from ZRAM, using transparent_hugepage_tmpfs=always (24 samples
each):
Before: avg: 10.66s, stddev: 0.04
After patch 1: avg: 10.58s, stddev: 0.04
After patch 2: avg: 10.65s, stddev: 0.05
After patch 3: avg: 10.65s, stddev: 0.04
After patch 4: avg: 10.67s, stddev: 0.04
After patch 5: avg: 9.79s, stddev: 0.04
After patch 6: avg: 9.79s, stddev: 0.05
After patch 7: avg: 9.78s, stddev: 0.05
After patch 8: avg: 9.79s, stddev: 0.04
Several patches improve the performance by a little, which is about ~8%
faster in total.
Build kernel test showed very slightly improvement, testing with make -j48
with defconfig in a 768M memcg also using ZRAM as swap, and
transparent_hugepage_tmpfs=always (6 test runs):
Before: avg: 3334.66s, stddev: 43.76
After patch 1: avg: 3349.77s, stddev: 18.55
After patch 2: avg: 3325.01s, stddev: 42.96
After patch 3: avg: 3354.58s, stddev: 14.62
After patch 4: avg: 3336.24s, stddev: 32.15
After patch 5: avg: 3325.13s, stddev: 22.14
After patch 6: avg: 3285.03s, stddev: 38.95
After patch 7: avg: 3287.32s, stddev: 26.37
After patch 8: avg: 3295.87s, stddev: 46.24
This patch (of 7):
Currently shmem calls xa_get_order to get the swap radix entry order,
requiring a full tree walk. This can be easily combined with the swap
entry value checking (shmem_confirm_swap) to avoid the duplicated lookup
and abort early if the entry is gone already. Which should improve the
performance.
Link: https://lkml.kernel.org/r/20250728075306.12704-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20250728075306.12704-3-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After commit acd7ccb284b8 ("mm: shmem: add large folio support for
tmpfs"), we extend the 'huge=' option to allow any sized large folios for
tmpfs, which means tmpfs will allow getting a highest order hint based on
the size of write() and fallocate() paths, and then will try each
allowable large order.
However, when the i915 driver allocates shmem memory, it doesn't provide
hint information about the size of the large folio to be allocated,
resulting in the inability to allocate PMD-sized shmem, which in turn
affects GPU performance.
Patryk added:
: In my tests, the performance drop ranges from a few percent up to 13%
: in Unigine Superposition under heavy memory usage on the CPU Core Ultra
: 155H with the Xe 128 EU GPU. Other users have reported performance
: impact up to 30% on certain workloads. Please find more in the
: regressions reports:
: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14645
: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13845
:
: I believe the change should be backported to all active kernel branches
: after version 6.12.
To fix this issue, we can use the inode's size as a write size hint in
shmem_read_folio_gfp() to help allocate PMD-sized large folios.
Link: https://lkml.kernel.org/r/f7e64e99a3a87a8144cc6b2f1dddf7a89c12ce44.1753926601.git.baolin.wang@linux.alibaba.com
Fixes: acd7ccb284b8 ("mm: shmem: add large folio support for tmpfs")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reported-by: Patryk Kowalczyk <patryk@kowalczyk.ws>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Patryk Kowalczyk <patryk@kowalczyk.ws>
Suggested-by: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current swap-in code assumes that, when a swap entry in shmem mapping
is order 0, its cached folios (if present) must be order 0 too, which
turns out not always correct.
The problem is shmem_split_large_entry is called before verifying the
folio will eventually be swapped in, one possible race is:
CPU1 CPU2
shmem_swapin_folio
/* swap in of order > 0 swap entry S1 */
folio = swap_cache_get_folio
/* folio = NULL */
order = xa_get_order
/* order > 0 */
folio = shmem_swap_alloc_folio
/* mTHP alloc failure, folio = NULL */
<... Interrupted ...>
shmem_swapin_folio
/* S1 is swapped in */
shmem_writeout
/* S1 is swapped out, folio cached */
shmem_split_large_entry(..., S1)
/* S1 is split, but the folio covering it has order > 0 now */
Now any following swapin of S1 will hang: `xa_get_order` returns 0, and
folio lookup will return a folio with order > 0. The
`xa_get_order(&mapping->i_pages, index) != folio_order(folio)` will always
return false causing swap-in to return -EEXIST.
And this looks fragile. So fix this up by allowing seeing a larger folio
in swap cache, and check the whole shmem mapping range covered by the
swapin have the right swap value upon inserting the folio. And drop the
redundant tree walks before the insertion.
This will actually improve performance, as it avoids two redundant Xarray
tree walks in the hot path, and the only side effect is that in the
failure path, shmem may redundantly reallocate a few folios causing
temporary slight memory pressure.
And worth noting, it may seems the order and value check before inserting
might help reducing the lock contention, which is not true. The swap
cache layer ensures raced swapin will either see a swap cache folio or
failed to do a swapin (we have SWAP_HAS_CACHE bit even if swap cache is
bypassed), so holding the folio lock and checking the folio flag is
already good enough for avoiding the lock contention. The chance that a
folio passes the swap entry value check but the shmem mapping slot has
changed should be very low.
Link: https://lkml.kernel.org/r/20250728075306.12704-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20250728075306.12704-2-ryncsn@gmail.com
Fixes: 809bc86517cc ("mm: shmem: support large folio swap out")
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|