| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Support for multiple sections in a BPT stream
- Align DMA frame with BPT frames
- Qualcomm support for v3.1.0 controllers
* tag 'soundwire-6.19-rc1_updated' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: handle multi BPT sections
soundwire: pass sdw_bpt_section to cdns BPT helpers
soundwire: introduce BPT section
soundwire: intel_ace2x: add fake frame to BRA read command
soundwire: cadence_master: add fake_size parameter to sdw_cdns_prepare_read_dma_buffer
ASoC: SOF: Intel: export hda_sdw_bpt_get_buf_size_aligment
soundwire: cadence: export sdw_cdns_bpt_find_bandwidth
soundwire: cadence_master: set data_per_frame as frame capability
soundwire: only compute BPT stream in sdw_compute_dp0_port_params
soundwire: cadence_master: make frame index trace more readable
soundwire: qcom: adding support for v3.1.0
dt-bindings: soundwire: qcom: Document v3.1.0 version of IP block
soundwire: qcom: prepare for v3.x
soundwire: qcom: deprecate qcom,din/out-ports
dt-bindings: soundwire: qcom: deprecate qcom,din/out-ports
soundwire: qcom: remove unused rd_fifo_depth
of: base: Add of_property_read_u8_index
|
|
The dma buffer need to be a multiple of data block size and
the fifo size. Export a function to return the LCM of data
block size and the fifo size.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014031450.3781789-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.19
This is a very large set of updates, as well as some more extensive
cleanup work from Morimto-san we've also added a generic SCDA class
driver for SoundWire devices enabling us to support many chips with
no custom code. There's also a batch of new drivers added for both
SoCs and CODECs.
- Added a SoundWire SCDA generic class driver, pulling in a little
regmap work to support it.
- A *lot* of cleaup and API improvement work from Morimoto-san.
- Lots of work on the existing Cirrus, Intel, Maxim and Qualcomm
drivers.
- Support for Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830.
This also pulls in some gpiolib changes supporting shared GPIOs in the
core there so we can convert some of the ASoC drivers open coding
handling of that to the core functionality.
|
|
As per the C99 standard snprintf() returns the length of the data
that *would have been* written if there were enough space for it.
It's generally considered safer to use the scnprintf() variant.
Link: https://github.com/KSPP/linux/issues/105
Signed-off-by: HariKrishna Sagala <hariconscious@gmail.com>
Link: https://patch.msgid.link/20251111052920.56459-2-hariconscious@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Linux supports NXP's LMM SCMI protocol so switch to using the appropriate
API. The SIPs were intended to act as placeholders until the support for
said protocol was upstreamed.
The underlying CPU protocol command from IMX_SIP_SRC_M_RESET_ADDR_SET is
replaced by a LMM protocol command with the same effect (i.e. setting the
boot address) since using the CPU protocol would require additional
permissions (which TF-A already had). Apart from this, the SIPs are
replaced by their equivalent Linux LMM commands.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://patch.msgid.link/20251114143503.2139-1-laurentiumihalcea111@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for Nova Lake S (NVL-S).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251104121650.21872-6-peter.ujfalusi@linux.intel.com
|
|
This patch converts below functions.
dapm->dev -> snd_soc_dapm_to_dev()
dapm->card -> snd_soc_dapm_to_card()
dapm->component -> snd_soc_dapm_to_component()
dapm_kcontrol_get_value() -> snd_soc_dapm_kcontrol_get_value()
snd_soc_component_enable_pin() -> snd_soc_dapm_enable_pin()
snd_soc_component_enable_pin_unlocked() -> snd_soc_dapm_enable_pin_unlocked()
snd_soc_component_disable_pin() -> snd_soc_dapm_disable_pin()
snd_soc_component_disable_pin_unlocked() -> snd_soc_dapm_disable_pin_unlocked()
snd_soc_component_nc_pin() -> snd_soc_dapm_nc_pin()
snd_soc_component_nc_pin_unlocked() -> snd_soc_dapm_nc_pin_unlocked()
snd_soc_component_get_pin_status() -> snd_soc_dapm_get_pin_status()
snd_soc_component_force_enable_pin() -> snd_soc_dapm_force_enable_pin()
snd_soc_component_force_enable_pin_unlocked() -> snd_soc_dapm_force_enable_pin_unlocked()
snd_soc_component_force_bias_level() -> snd_soc_dapm_force_bias_level()
snd_soc_component_get_bias_level() -> snd_soc_dapm_get_bias_level()
snd_soc_component_init_bias_level() -> snd_soc_dapm_init_bias_level()
snd_soc_component_get_dapm() -> snd_soc_component_to_dapm()
snd_soc_dapm_kcontrol_component() -> snd_soc_dapm_kcontrol_to_component()
snd_soc_dapm_kcontrol_widget() -> snd_soc_dapm_kcontrol_to_widget()
snd_soc_dapm_kcontrol_dapm() -> snd_soc_dapm_kcontrol_to_dapm()
snd_soc_dapm_np_pin() -> snd_soc_dapm_disable_pin()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/87a50ttng3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For those amp with "AMP" name_prefix in the codec_info_list[], use the
AMP<index> format to meet the UCM expectation.
Fixes: 5cd5f8fc29fa ("ASoC: SOF: Intel: add hyphen between name and index to amp name_prefix")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251030065503.1216419-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "ASoC: SOF: Intel: use sof_sdw as default SDW machine driver" commit
uses asoc_sdw_get_codec_info_list_count() and codec_info_list[] in the
hda_sdw_machine_select() function. Select SND_SOC_SDW_UTILS to fix the
function undefined issue.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510220819.KrN5gjKL-lkp@intel.com/
Fixes: 5226d19d4cae53 ("ASoC: SOF: Intel: use sof_sdw as default SDW machine driver")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251029040344.1116201-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
User space (alsa-lib) uses the PCM device name to detect HDMI devices, the
name is expected to be in form of 'HDMI'+<space>+number.
The PCM device name is not configured in ASoC, only the PCM id is set based
on the loaded topology.
Detect the HDMI PCM playback devices and configure the name to help user
space to handle HDMI PCMs correctly.
aplay -l | grep HDMI (Audio capable monitor connected)
Before the change:
card 0: sofhdadsp [sof-hda-dsp], device 3: HDMI1 (*) []
card 0: sofhdadsp [sof-hda-dsp], device 4: HDMI2 (*) []
card 0: sofhdadsp [sof-hda-dsp], device 5: HDMI3 (*) []
after the change:
card 0: sofhdadsp [sof-hda-dsp], device 3: HDMI1 (*) [DELL P1917S]
card 0: sofhdadsp [sof-hda-dsp], device 4: HDMI2 (*) [HDMI 2]
card 0: sofhdadsp [sof-hda-dsp], device 5: HDMI3 (*) [HDMI 3]
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251029105134.1342-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function topology feature, and the plat_data->machine field that
specifies this feature, is ACPI specific. The check didn't take this
into consideration, which causes a NULL pointer dereference splat on
OF platforms:
BUG: KASAN: null-ptr-deref in sof_create_ipc_file_profile (sound/soc/sof/fw-file-profile.c:291 sound/soc/sof/fw-file-profile.c:340) snd_sof
Read of size 8 at addr 00000000000000c8 by task (udev-worker)/247
CPU: 7 UID: 0 PID: 247 Comm: (udev-worker) Not tainted 6.18.0-rc2-next-20251023-03804-g93b191bc0c26-dirty #747 PREEMPT ba3c303a11d89508de4087cb5b4f8985b6d87b6f
Hardware name: Google Ciri sku2 board (DT)
Call trace:
[KASAN stuff]
sof_create_ipc_file_profile (sound/soc/sof/fw-file-profile.c:291 sound/soc/sof/fw-file-profile.c:340) snd_sof
snd_sof_device_probe (sound/soc/sof/core.c:304 sound/soc/sof/core.c:388 sound/soc/sof/core.c:460 sound/soc/sof/core.c:719) snd_sof
sof_of_probe (sound/soc/sof/sof-of-dev.c:84) snd_sof_of
platform_probe (drivers/base/platform.c:1405)
[...]
Check that the ACPI specific field is actually valid before accessing
it.
This was seen on a MediaTek based Chromebook.
Fixes: 2b92b98cc476 ("ASoC: SOF: Don't print the monolithic topology name if function topology may be used")
Cc: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251023061226.1127345-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For those amps that use their name as name prefix the amp id should be
added after a hyphen symbol. Like "rt1320-1".
Fixes: 5226d19d4cae ("ASoC: SOF: Intel: use sof_sdw as default SDW machine driver")
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251021065700.130810-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Currently, we create a ACPI mach table for every new audio
configuration. And all Intel SOF SoundWire configurations point to the
same sof_sdw machine driver. Also, we don't need a specific topology for
a coufguration, we can use the function topology instead. That give us a
change to generate an ACPI mach table based on the SoundWire codec
information reported by the ACPI table and use the sof_sdw machine
driver as the default machine driver.
This will reduce the effort to support a new Intel SOF SoundWire audio
configuration.
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_wq is a per-CPU worqueue, replaced by system_percpu_wq. Despite that,
system_wq in this change has been replaced by system_dfl_wq, because there
aren't per-cpu variables.
The old wq will be kept for a few release cylces.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250929155053.400342-2-marco.crivellari@suse.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If there is no SoundWire machine matches the existing acpi match table,
get the required machine data from the acpi table and construct the
link adrs and endpoints. Pass the data to the default Intel SoundWire
machine driver. And we don't need to add new item to the acpi match
table in common cases.
We will construct a dummy topology name. The dummy topology is just
used to extract the platform name for function topology and should not
be used.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20251009094023.3474895-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Monolithic topology is not needed if function topology is used. Instead
of creating a dummy topology in the file system, we can skip the
existence check in the kernel.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20251009094023.3474895-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The platform name will be used construct the topology name.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251009094023.3474895-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
be used
It may confuse people if "Topology file:" is printed but the topology
file is not really used. We keep the print if the topology file is
missing thus user can know what topology is missed in the file system.
And increase the log level to info for the actual topology that is used.
So that user can get which topology is used.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251009094023.3474895-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.18
A small pile of fixes, almost all for the Intel and SOF code surrounding
management of the host buffer. We've also got one fix for Meson and new
device IDs and quirk supporting the RT722VB.
|
|
It is allowed to mix Link and Host DMA channels in a way that their index
is different. In this case we would read the LLP from a channel which is
not used or used for other operation.
Such case can be reproduced on cAVS2.5 or ACE1 platforms with soundwire
configuration:
playback to SDW would take Host channel 0 (stream_tag 1) and no Link DMA
used
Second playback to HDMI (HDA) would use Host channel 1 (stream_tag 2) and
Link channel 0 (stream_tag 1).
In this case reading the LLP from channel 2 is incorrect as that is not the
Link channel used for the HDMI playback.
To correct this, we should look up the BE and get the channel used on the
Link side.
Fixes: 67b182bea08a ("ASoC: SOF: Intel: hda: Implement get_stream_position (Linear Link Position)")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251002074719.2084-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a sanity check for the calculated delay value before reporting it to
the application. If the value is clearly invalid, emit a rate limited
warning to kernel log and return a zero delay. This can occur e.g if the
host or link DMA hits a buffer over/underrun condition.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251002074719.2084-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add dev_dbg_ratelimited() wrapper for snd_sof_pcm specific debug prints
that needs rate limited.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251002074719.2084-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The size of the DSP host buffer was incorrectly defined as 2ms while
it is 4ms and the ChainDMA PCMs are using 5ms as host facing buffer.
The constraint will be set against the period time rather than the buffer
time to make sure that application will not face with xruns when the
DMA bursts to refill the host buffer.
The minimal period size will be also used by Pipewire in case of SOF
cards to set the headroom to a length which will avoid the cases when
the hw_ptr jumps over the appl_ptr because of a burst.
Iow, it will make Pipewire to keep a safe distance from the hw_ptr.
https://github.com/thesofproject/linux/issues/5284
https://gitlab.freedesktop.org/pipewire/wireplumber/-/merge_requests/740
https://gitlab.freedesktop.org/pipewire/pipewire/-/merge_requests/2548
|
|
buffer time
Instead of constraining the ALSA buffer time to be double of the firmware
host buffer size, it is better to set it for the period time.
This will implicitly constrain the buffer time to a safe value
(num_periods is at least 2) and prohibits applications to set smaller
period size than what will be covered by the initial DMA burst.
Fixes: fe76d2e75a6d ("ASoC: SOF: Intel: hda-pcm: Use dsp_max_burst_size_in_ms to place constraint")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251002135752.2430-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For ChainDMA the firmware allocates 5ms host buffer instead of the standard
4ms which should be taken into account when setting the constraint on the
buffer size.
Fixes: 842bb8b62cc6 ("ASoC: SOF: ipc4-topology: Save the DMA maximum burst size for PCMs")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251002135752.2430-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The firmware has changed the minimum host buffer size from 2 periods to
4 periods (1 period is 1ms) which was missed by the kernel side.
Adjust the SOF_IPC4_MIN_DMA_BUFFER_SIZE to 4 ms to align with firmware.
Link: https://github.com/thesofproject/sof/commit/f0a14a3f410735db18a79eb7a5f40dc49fdee7a7
Fixes: 594c1bb9ff73 ("ASoC: SOF: ipc4-topology: Do not parse the DMA_BUFFER_SIZE token")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251002135752.2430-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Assumption that chain DMA module starts the link DMA when 1ms of
data is available from host is not correct. Instead the firmware
chain DMA module fills the link DMA with initial buffer of zeroes
and the host and link DMAs are started at the same time.
This results in a small error in delay calculation. This can become a
more severe problem if host DMA has delays that exceed 1ms. This results
in negative delay to be calculated and bogus values reported to
applications. This can confuse some applications like
alsa_conformance_test.
Fix the issue by correctly calculating the firmware chain DMA
preamble size and initializing the start offset to this value.
Cc: stable@vger.kernel.org
Fixes: a1d203d390e0 ("ASoC: SOF: ipc4-pcm: Enable delay reporting for ChainDMA streams")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251002074719.2084-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the sampling rates going in (host) and out (dai) from the DSP
are different, the IPC4 delay reporting does not work correctly.
Add support for this case by scaling the all raw position values to
a common timebase before calculating real-time delay for the PCM.
Cc: stable@vger.kernel.org
Fixes: 0ea06680dfcb ("ASoC: SOF: ipc4-pcm: Correct the delay calculation")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251002074719.2084-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the case of static pipelines, freeing the widgets in the pipelines
that were not suspended after freeing the scheduler widgets results in
errors because the secondary cores are powered off when the scheduler
widgets are freed. Fix this by tearing down the leftover pipelines before
powering off the secondary cores.
Cc: stable@vger.kernel.org
Fixes: d7332c4a4f1a ("ASoC: SOF: ipc3-topology: Fix pipeline tear down logic")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251002073125.32471-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull the last minute fixes for 6.17.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull 6.17-devel branch for applying further changes cleanly.
Signed-off-by: Taksahi Iwai <tiwai@suse.de>
|
|
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>:
In PC systems using ACPI, the driver is able to read back an SSID from
the _SUB property. This SSID uniquely identifies the system, which
enables the driver to read the correct firmware and tuning for that
system from linux-firmware. Currently there is no way of reading this
property from device tree. Add an equivalent property in device tree
to perform the same role.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.18
A relatively quiet release for ASoC, we've had a lot of maintainance
work going on and several new drivers but really the most remarkable
thing is that we removed a driver, the WL1273 driver used in some old
Nokia systems that have had the underlying system support removed from
the kernel.
- Morimoto-san continues his work on cleanups of the core APIs and
enforcement of abstraction layers.
- Lots of cleanups and conversions of DT bindings.
- Substantial maintainance work on the Intel AVS drivers.
- Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai
FourSemi FS2104/5S, Texas Instruments PCM1754.
- Remove support for TI WL1273.
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
We would like to hide struct snd_soc_dapm_context from driver. So we need
cleanup code first. These are preparation for it.
|
|
Fix a potential integer overflow vulnerability in trace_filter_parse()
where the allocation size calculation could overflow.
The issue occurs when:
1. capacity is calculated by adding TRACE_FILTER_ELEMENTS_PER_ENTRY in a
loop for each entry found in the input string.
2. capacity * sizeof(**out) multiplication could overflow if many
entries are present in the input.
3. This results in a smaller allocation than expected, leading to
potential buffer overflow.
Replace kmalloc() with kmalloc_array() which provides built-in overflow
checking and will safely fail the allocation if overflow would occur,
preventing memory corruption.
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Link: https://patch.msgid.link/20250909225111.3740029-1-samasth.norway.ananda@oracle.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current soc-dapm is using "idle_bias_off", and its default settings
came from snd_soc_component "idle_bias_on". It is complicated/confusable.
Let's handling it as "idle_bias".
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/874itix06a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In ipc4_ssp_dai_config_pcm_params_match() when comparing params_channels()
against hw_config->tdm_slots the comparison should be a <= not a ==.
The number of TDM slots must be enough for the number of required channels.
But it can be greater. There are various reason why a I2S/TDM link has more
TDM slots than a particular audio stream needs.
The original comparison would fail on systems that had more TDM slots.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 8a07944a77e9 ("ASoC: SOF: ipc4-pcm: Look for best matching hw_config for SSP")
Link: https://patch.msgid.link/20250819160525.423416-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Stefan Kerkmann <s.kerkmann@pengutronix.de>:
Add a CODEC driver for the TI PCM1754.
|
|
The persistent_buffer agreement is false when hda_cl_prepare() is
called. We should use the same value when hda_cl_cleanup() is called.
Fixes: 5d5cb86fb46ea ("ASoC: SOF: Intel: hda-sdw-bpt: add helpers for SoundWire BPT DMA")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250915024853.1153518-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The copied_total field in struct snd_compr_tstamp is a 32-bit
value that can overflow on long-running high-bitrate streams,
leading to incorrect calculations for buffer availablility.
This patch adds a 64-bit safe timestamping mechanism.
A new UAPI struct, snd_compr_tstamp64, is added which uses 64-bit
types for byte counters. The relevant ops structures across the
ASoC and core compress code are updated to use this new struct.
ASoC drivers are updated to use u64 counters.
Internal timestamps being u64 now, a compatibility function is added
to convert the 64-bit timestamp back to the 32-bit format for legacy
ioctl callers.
Reviewed-by: Miller Liang <millerliang@google.com>
Tested-by: Joris Verhaegen <verhaegen@google.com>
Signed-off-by: Joris Verhaegen <verhaegen@google.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250905091301.2711705-2-verhaegen@google.com
|
|
The dev_err message is reporting an error about capture streams however
it is using the incorrect variable num_playback instead of num_capture.
Fix this by using the correct variable num_capture.
Fixes: a1d1e266b445 ("ASoC: SOF: Intel: Add Intel specific HDA stream operations")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250902120639.2626861-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
devm_ioremap_resource does not return NULL on error
but an error pointer so we need to use IS_ERR to check
the return code.
While at it also pass the error code to dev_err_probe
to improve logging.
Fixes: bc163baef570 ("ASoC: Use of_reserved_mem_region_to_resource() for "memory-region"")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250902102101.378809-1-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently the error check from the call to sof_ipc4_get_sample_type
is always false because a u32 variable out_ref_type is being used
to perform the less than zero check. Fix this by using the int
variable ret to perform the check.
Fixes: c04c2e829649 ("ASoC: SOF: ipc4-topology: Add support for 8-bit formats")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250902083213.2620124-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
This series will add support for various 8-bit and float formats.
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
This series improves the IPC4 probes implementation by improving the
report quality and adds support for querying the available probes
on the firmware side.
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Up to this point we had a spoken rule what sof-client can access and what
they must not (they cannot use sdev directly), recently there were attempts
to break this rule as clients could access sdev via the sof client dev.
The series will re-arrange the client device struct to 'hide' the sdev (and
the list) from client drivers to prevent abuse.
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
SDW codecs use the global HDaudio WAKEEN/STS to detect wakes since LNL. But
the wakeen is handled in the SDW driver. We should filter the bus->codec_mask
to only include HDA and IDISP codecs to avoid clearing the wakeen status
before it is handled.
|
|
Add SOF_TKN_COMP_SCHED_DOMAIN and connect it to struct snd_sof_widget
comp_domain member, with new get_token_comp_domain() function.
The logic is such that if the topology attribute is not present in the
widget node the corresponding IPC4 extension value is taken from the
module's manifest like before. But if the attribute is found and
recognized its value overrides what is there in the manifest.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Message-ID: <20250829151101.27327-1-peter.ujfalusi@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce a new internal structure for wrapping the sof_client_dev and
move members away from the client visible struct that they must not
access, let alone see (sdev and the list).
The changes are mechanical in nature and contained within sof-client core
code, no functional change or change in behavior is introduced.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Message-ID: <20250829102510.15159-3-peter.ujfalusi@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove the sof_client_dev_to_sof_dev() from the header file and add it as
a function in sof-client.c to avoid it's use by client drivers.
At the same time mark the sdev and list of sof_client_dev as restricted
fro core use only.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Message-ID: <20250829102510.15159-2-peter.ujfalusi@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
