| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"UBIFS:
- Misc code cleanups such as removal of unnecessary variables
UBI:
- No longer program unused bit in UBI headers"
* tag 'ubifs-for-linus-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubifs: vmalloc(array_size()) -> vmalloc_array()
ubi: fastmap: fix ubi->fm memory leak
mtd: ubi: skip programming unused bits in ubi headers
ubifs: Remove unnecessary variable assignments
ubifs: Simplify the code using ubifs_crc_node
ubifs: Remove unnecessary parameters '*c'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"Core MTD changes:
- We must ignore error -ENOENT from parsers on subpartitions which is
a legitimate return value
- PM support is added to the intel-dg driver
Raw NAND changes:
- The major change in this is the support for the Allwinner H616 NAND
controller, which lead to numerous changes and cleanups in the
driver.
- Another notable change in this driver is the use of field_get() and
field_prep(), but since the global support for this helpers is
going to be merged in the same release as we start using these
helpers, we undefine them in the first place to avoid warnings.
- Marvell drivers layout handling changes have also landed, they fix
previous definitions and abuses that have been made previously,
which implied to relax the ECC parameters validation in the core a
bit.
- The Cadence NAND controller driver gets NV-DDR interface support.
SPI NAND changes:
- Support for FudanMicro FM25S01BI3 and ESMT F50L1G41LC is added.
SPI NOR changes:
- Fix SMPT parsing for S25FS-S flash family. They report variable
dummy cycles for reads. This results in the default of 0 being
used. This works for other Infineon chips, but not for the S25FS-S
family. They need 8 dummy cycles. Add fixup hooks to specify that.
Also add fixup hooks to fix incorrect map ID data in SFDP.
- Add support for a bunch of Winbond flashes. Their block protection
information is not discoverable, so they need to have an entry in
the flash tables to describe that.
- Some cleanups for Micron flash support.
- Add support for Micron mt35xu01gbba.
- Some SPI controllers like the Intel one on the PCI bus do not
support the read CR opcode (0x35). Do not use the opcode if the
controller does not support it.
Aside from these main changes, there is the usual load of API updates,
kdoc fixes, potential memory leaks fixes, etc"
* tag 'mtd/for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (51 commits)
mtd: sm_ftl: Fix typo in comment in sm_read_lba
mtd: sm_ftl: Replace deprecated strncpy with sysfs_emit in sm_attr_show
mtd: lpddr_cmds: fix signed shifts in lpddr_cmds
mtd: docg3: fix kernel-doc warnings
mtd: spinand: add support for FudanMicro FM25S01BI3
mtd: rawnand: renesas: Handle devm_pm_runtime_enable() errors
mtd: nand: realtek-ecc: Fix Kconfig dependencies
mtd: rawnand: sunxi: #undef field_{get,prep}() before local definition
mailmap: update Pratyush Yadav's email address
mtd: spi-nor: core: Check read CR support
mtd: spi-nor: micron-st: add TODO for fixing mt35xu02gcba
mtd: spi-nor: micron-st: add mt35xu01gbba support
mtd: spi-nor: micron-st: use SFDP of mt35xu512aba
mtd: spi-nor: micron-st: move set_octal_dtr to late_init()
mtd: spi-nor: micron-st: rename the die_late_init functions
mtd: spinand: esmt: add support for F50L1G41LC
mtd: rawnand: lpc32xx_slc: Convert to use devm_gpiod_get_optional()
mtd: mtdpart: ignore error -ENOENT from parsers on subpartitions
mtd: maps: pcmciamtd: fix potential memory leak in pcmciamtd_detach()
mtd: spi-nor: spansion: SMPT fixups for S25FS-S
...
|
|
Raw NAND changes:
* The major change in this MR will be the support for the Allwinner H616
NAND controller, which lead to numerous changes and cleanups in the
driver.
* Another notable change on this driver is the use of
field_get()/field_prep(), but since the global support for this
helpers is going to be merged in the same release as we start using
these helpers, it implies undefining them in the first place to avoid
warnings. Depending on the merging order (Yuri's bitmap branch or
mtd/next), a temporary warning may arise.
* Marvell drivers layout handling changes have also landed, they fix
previous definitions and abuses that have been made previously, which
implied to relax the ECC parameters validation in the core a bit.
* The Cadence NAND controller driver gets NV-DDR interface support.
SPI NAND changes:
* Support for FudanMicro FM25S01BI3 and ESMT F50L1G41LC is added.
Aside from these main changes, there is the usual load of fixes and API
updates.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next
SPI NOR changes for 6.19
Notable changes:
- Fix SMPT parsing for S25FS-S flash family. They report variable dummy
cycles for reads. This results in the default of 0 being used. This
works for other Infineon chips, but not for the S25FS-S family. They
need 8 dummy cycles. Add fixup hooks to specify that. Also add fixup
hooks to fix incorrect map ID data in SFDP.
- Add support for a bunch of Winbond flashes. Their block protection
information is not discoverable, so they need to have an entry in the
flash tables to describe that.
- Some cleanups for Micron flash support.
- Add support for Micron mt35xu01gbba.
- Some SPI controllers like the Intel one on the PCI bus do not support
the read CR opcode (0x35). Do not use the opcode if the controller
does not support it.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQTlUWNzXGEo3bFmyIR4drqP028CQUCaSjP+QAKCRAR4drqP028
# CfGsAQC5Vj+FaeQHyY+yywqM5wxE+xj6mMCDNixd2FVYlf5b7wEA2/9bpiHjy3qi
# 4MZmFJNcE+XsxReWDTBTZ6VbrjDlqg0=
# =M+s4
# -----END PGP SIGNATURE-----
# gpg: Signature made jeu. 27 nov. 2025 23:26:01 CET
# gpg: using EDDSA key 1395458DCD7184A376C59B2211E1DAEA3F4DBC09
# gpg: Good signature from "Pratyush Yadav <p.yadav@ti.com>" [expired]
# gpg: aka "Pratyush Yadav <me@yadavpratyush.com>" [expired]
# gpg: p.yadav@ti.com: Verified 5 signatures in the past 3 years. Encrypted 0 messages.
# gpg: me@yadavpratyush.com: Verified 5 signatures in the past 3 years. Encrypted
# 0 messages.
# gpg: Note: This key has expired!
# Primary key fingerprint: 805C 3923 2FBE 108C 49E1 663C F650 3556 C11B 1CCD
# Subkey fingerprint: 1395 458D CD71 84A3 76C5 9B22 11E1 DAEA 3F4D BC09
|
|
s/is/if/
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
strncpy() is deprecated [1] for NUL-terminated destination buffers
because it does not guarantee NUL termination. It also unnecessarily
NUL-pads the destination buffer if the source is shorter. Replace it
with sysfs_emit() using the "%.*s" format specifier and supply the
length 'sm_attr->len' to improve sm_attr_show().
Return the number of characters actually written to 'buf' instead of
'sm_attr->len'.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
There are several places where a value of type 'int' is shifted by
lpddr->chipshift. lpddr->chipshift is derived from QINFO geometry and
might reach 31 when QINFO reports a 2 GiB size - the maximum supported by
LPDDR(1) compliant chips. This may cause unexpected sign-extensions when
casting the integer value to the type of 'unsigned long'.
Use '1UL << lpddr->chipshift' and cast 'j' to unsigned long before
shifting so the computation is performed at the destination width.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c68264711ca6 ("[MTD] LPDDR Command set driver")
Signed-off-by: Ivan Stepchenko <sid@itb.spb.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Fix kernel-doc warnings in docg3.h to avoid build warnings:
Warning: ../drivers/mtd/devices/docg3.h:276 bad line:
Warning: drivers/mtd/devices/docg3.h:299 struct member 'max_block' not
described in 'docg3'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Add support for FudanMicro FM25S01BI3 SPI NAND.
Link: https://www.fmsh.com/nvm/FM25S01BI3_ds_eng.pdf
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The problem is that scan_fast() allocate memory for ubi->fm
and ubi->fm->e[x], but if the following attach process fails
in ubi_wl_init or ubi_read_volume_table, the whole attach
process will fail without executing ubi_wl_close to free the
memory under ubi->fm.
Fix this by add a new ubi_free_fastmap function in fastmap.c
to free the memory allocated for fm.
If SLUB_DEBUG and KUNIT are enabled, the following warning messages
will show:
ubi0: detaching mtd0
ubi0: mtd0 is detached
ubi0: default fastmap pool size: 200
ubi0: default fastmap WL pool size: 100
ubi0: attaching mtd0
ubi0: attached by fastmap
ubi0: fastmap pool size: 200
ubi0: fastmap WL pool size: 100
ubi0 error: ubi_wl_init [ubi]: no enough physical eraseblocks (4, need 203)
ubi0 error: ubi_attach_mtd_dev [ubi]: failed to attach mtd0, error -28
UBI error: cannot attach mtd0
=================================================================
BUG ubi_wl_entry_slab (Tainted: G B O L ): Objects remaining in ubi_wl_entry_slab on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Slab 0xffff2fd23a40cd00 objects=22 used=1 fp=0xffff2fd1d0334fd8 flags=0x883fffc010200(slab|head|section=34|node=0|zone=1|lastcpupid=0x7fff)
CPU: 0 PID: 5884 Comm: insmod Tainted: G B O L 5.10.0 #1
Hardware name: LS1043A RDB Board (DT)
Call trace:
dump_backtrace+0x0/0x198
show_stack+0x18/0x28
dump_stack+0xe8/0x15c
slab_err+0x94/0xc0
__kmem_cache_shutdown+0x1fc/0x39c
kmem_cache_destroy+0x48/0x138
ubi_init+0x1d4/0xf34 [ubi]
do_one_initcall+0xb4/0x24c
do_init_module+0x4c/0x1dc
load_module+0x212c/0x2260
__se_sys_finit_module+0xb4/0xd8
__arm64_sys_finit_module+0x18/0x28
el0_svc_common.constprop.0+0x78/0x1a0
do_el0_svc+0x78/0x90
el0_svc+0x20/0x38
el0_sync_handler+0xf0/0x140
normal+0x3d8/0x400
Object 0xffff2fd1d0334e68 @offset=3688
Allocated in ubi_scan_fastmap+0xf04/0xf40 [ubi] age=80 cpu=0 pid=5884
__slab_alloc.isra.21+0x6c/0xb4
kmem_cache_alloc+0x1e4/0x80c
ubi_scan_fastmap+0xf04/0xf40 [ubi]
ubi_attach+0x1f0/0x3a8 [ubi]
ubi_attach_mtd_dev+0x810/0xbc8 [ubi]
ubi_init+0x238/0xf34 [ubi]
do_one_initcall+0xb4/0x24c
do_init_module+0x4c/0x1dc
load_module+0x212c/0x2260
__se_sys_finit_module+0xb4/0xd8
__arm64_sys_finit_module+0x18/0x28
el0_svc_common.constprop.0+0x78/0x1a0
do_el0_svc+0x78/0x90
el0_svc+0x20/0x38
el0_sync_handler+0xf0/0x140
normal+0x3d8/0x400
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220744
Signed-off-by: Liyuan Pang <pangliyuan1@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This patch prevents unnecessary programming of bits in ec_hdr and
vid_hdr that are not used or read during normal UBI operation. These
unused bits are typcially already set to 1 in erased flash and do not
need to be explicitly programmed to 0 if they are not used.
Programming such unused areas offers no functional benefit and may
result in unnecessary flash wear, reducing the overall lifetime of the
device. By skipping these writes, we preserve the flash state as much as
possible and minimize wear caused by redundant operations.
This change ensures that only necessary fields are written when preparing
UBI headers, improving flash efficiency without affecting functionality.
Additionally, the Kioxia TC58NVG1S3HTA00 datasheet (page 63) also notes
that continuous program/erase cycling with a high percentage of '0' bits
in the data pattern can accelerate block endurance degradation.
This further supports avoiding large 0x00 patterns.
Link: https://europe.kioxia.com/content/dam/kioxia/newidr/productinfo/datasheet/201910/DST_TC58NVG1S3HTA00-TDE_EN_31442.pdf
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
devm_pm_runtime_enable() can fail due to memory allocation failures.
The current code ignores its return value and proceeds with
pm_runtime_resume_and_get(), which may operate on incorrectly
initialized runtime PM state.
Check the return value of devm_pm_runtime_enable() and return the
error code if it fails.
Fixes: 6a2277a0ebe7 ("mtd: rawnand: renesas: Use runtime PM instead of the raw clock API")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The driver uses DMA but does not mark it as a prerequisite in
Kconfig. As it is also defined with COMPILE_TEST, autobuilders complain
about certain symbols not being available when linking on architectures
without DMA support (?) like sh.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511071114.8WeW2GZK-lkp@intel.com
Cc: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Prepare for the advent of globally available common field_get() and
field_prep() macros by undefining the symbols before defining local
variants. This prevents redefinition warnings from the C preprocessor
when introducing the common macros later.
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Some SPI controllers like Intel's one on the PCI bus do not support
opcode 35h. This opcode is used to read the Configuration Register on
SPI-NOR chips that have 16-bit Status Register configured regardless
of the controller support for it. Adding a check call in the setup step
allows disabling use of the 35h opcode and falling back to the manual
Status Registers management.
Before:
openat(AT_FDCWD, "/dev/mtd0", O_RDWR) = 4
ioctl(4, MIXER_WRITE(6) or MEMUNLOCK, {start=0, length=0x2000000}) = -1
EOPNOTSUPP
After:
openat(AT_FDCWD, "/dev/mtd0", O_RDWR) = 4
ioctl(4, MIXER_WRITE(6) or MEMUNLOCK, {start=0, length=0x2000000}) = 0
ioctl(4, MIXER_WRITE(5) or MEMLOCK, {start=0x1800000, length=0x800000}) = 0
Suggested-by: Adeel Arshad <adeel.arshad@intel.com>
Signed-off-by: Jakub Czapiga <czapiga@google.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
|
|
The MT35XU02GCBA flash device does not support chip erase, according to
its datasheet. It supports die erase, which means the current driver
implementation will likely need to be converted to use die erase.
Furthermore, similar to the MT35XU01GBBA, the
SPI_NOR_IO_MODE_EN_VOLATILE flag probably needs to be enabled.
Currently no active contributor has access to this hardware so there is
no way of testing the fixes. Add a TODO item on the flash entry so
someone with the flash can test that the support is indeed broken and
send the fixes.
Link: https://datasheet.octopart.com/MT35XU02GCBA1G12-0AAT-Micron-datasheet-138896808.pdf
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
[pratyush@kernel.org: refactor the comment and commit message to make
the purpose of the comment clearer]
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
|
|
mt35xu01gbba is similar with mt35xu512aba, but with two dies.
mt35xu01gbba has SFDP and support 8D-8D-8D mode, but SFDP
lack SNOR_F_IO_MODE_EN_VOLATILE, so add this fixup flags here.
Besides, mt35xu01gbba do not support chip erase, but support
die erase, so add that in late_init().
Link: https://datasheet.octopart.com/MT35XU02GCBA1G12-0AAT-Micron-datasheet-138896808.pdf
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
|
|
mt35xu512aba has SFDP, already contain the necessary
information, so remove size and some flags here.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
|
|
Move params->set_octal_dtr from flash_info->fixups->default_init()
to spi_nor_manufacturer-> fixups-> late_init(), this can cover
all Micorn and ST chips without repeat in each chip's flash_info.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
|
|
st_nor_two/four_die_late_init() also suit for micron chips,
so rename to micron_st_nor_two/four_die_late_init(), and move
these functions up, then micron can use these function without
declaration.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
|
|
This adds support for ESMT F50L1G41LC, which appears to be an updated
version of the already supported F50L1G41LB.
Add esmt_8c SPI_NAND manufacturer to account for the newly used vendor
ID with support for the ESMT F50L1G41LC chip.
Link: https://github.com/openwrt/openwrt/pull/15214#issuecomment-3514824435
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The initial fix for a GPIO descriptor leak added manual gpiod_put()
calls in the error path and remove function.
This follow-up patch improves upon the fix by switching to the
resource-managed devm_gpiod_get_optional() API.
Suggested-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Commit 5c2f7727d437 ("mtd: mtdpart: check for subpartitions parsing
result") introduced some kind of regression with parser on subpartitions
where if a parser emits an error then the entire parsing process from the
upper parser fails and partitions are deleted.
Not checking for error in subpartitions was originally intended as
special parser can emit error also in the case of the partition not
correctly init (for example a wiped partition) or special case where the
partition should be skipped due to some ENV variables externally
provided (from bootloader for example)
One example case is the TRX partition where, in the context of a wiped
partition, returns a -ENOENT as the trx_magic is not found in the
expected TRX header (as the partition is wiped)
To better handle this and still keep some kind of error tracking (for
example to catch -ENOMEM errors or -EINVAL errors), permit parser on
subpartition to emit -ENOENT error, print a debug log and skip them
accordingly.
This results in giving better tracking of the status of the parser
(instead of returning just 0, dropping any kind of signal that there is
something wrong with the parser) and to some degree restore the original
logic of the subpartitions parse.
(worth to notice that some special partition might have all the special
header present for the parser and declare 0 partition in it, this is why
it would be wrong to simply return 0 in the case of a special partition
that is NOT init for the scanning parser)
Cc: stable@vger.kernel.org
Fixes: 5c2f7727d437 ("mtd: mtdpart: check for subpartitions parsing result")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The memory allocated for struct pcmciamtd_dev in pcmciamtd_probe() is
not freed in the corresponding remove function pcmciamtd_detach().
Fix that by freeing it in the remove function.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
S25FS-S family supports SMPT that helps to detect sector layout settings
in configuration registers, but some of parameters in the table are
wrong or undetermined so the fixups below are required.
Read Any Register op is used to read configuration registers that
related to sector map. The op requires 8 cycles latency by default.
Implement smpt_read_dummy() to set correct dummy cycles.
Map ID is structured by combination of CR3NV[3], CR1NV[2], and CR3NV[1].
However, in S25FS512S, CR3NV[1] is RFU and always 0, while map IDs
defined in the table assume it is always 1. Implement smpt_map_id() to
fix map ID for S25FS512S. Other densities in S25FS-S family (256Mb and
128Mb) don't need this fix as CR3NV[1] in those chips is configurable
and map IDs are correctly defined in SMPT.
Co-developed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Tested-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # S25FS512S
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
|
|
Certain chips have inconsistent Sector Map Parameter Table (SMPT) data,
which leads to the wrong map ID being identified, causing failures to
detect the correct sector map.
To fix this, introduce smpt_map_id() into the struct spi_nor_fixups.
This function will be called after the initial SMPT-based detection,
allowing chip-specific logic to correct the map ID.
Infineon S25FS512S needs this fixup as it has inconsistency between map
ID definition and configuration register value actually obtained.
Co-developed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Tested-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # S25FS512S
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
|
|
SMPT contains config detection info that describes opcode, address, and
dummy cycles to read sector map config. The dummy cycles parameter can
be SMPT_CMD_READ_DUMMY_IS_VARIABLE and in that case nor->read_dummy
(initialized as 0) is used. In Infineon flash chips, Read Any Register
command with variable dummy cycle is defined in SMPT. S25Hx/S28Hx flash
has 0 dummy cycle by default to read volatile regiters and
nor->read_dummy can work. S25FS-S flash has 8 dummy cycles so we need a
hook that can fix dummy cycles with actually used value.
Inroduce smpt_read_dummy() in struct spi_nor_fixups. It is called when
the dummy cycle field in SMPT config detection is 'varialble'.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Tested-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # S25FS512S
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
|
|
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
|
|
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
|
|
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
|
|
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
|
|
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
|
|
This chip must be described as none of the block protection information
are discoverable. This chip supports 4 bits plus the top/bottom
addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
|
|
This was supposed to pass "onenand" instead of "&onenand" with the
ampersand. Passing a random stack address which will be gone when the
function ends makes no sense. However the good thing is that the pointer
is never used, so this doesn't cause a problem at run time.
Fixes: e23abf4b7743 ("mtd: OneNAND: S5PC110: Implement DMA interrupt method")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
According to datasheet (http://eng.fmsh.com/nvm/FM25S01A_ds_eng.pdf)
there is no QE (Quad Enable) bit for FM25S01A flash, so remove it.
Fixes: 5f284dc15ca86 ("mtd: spinand: add support for FudanMicro FM25S01A")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Tested-by: Tianling Shen <cnsztl@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The Intel DG cards do not have separate power control for
persistent memory.
The memory is available when the whole card is awake.
Enable runtime PM in mtd driver to notify parent graphics driver
that whole card should be kept awake while nvm operations are
performed through this driver.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The H616 nand controller has the same base as A10/A23, with some
differences:
- mdma is based on chained buffers
- its ECC supports up to 80bit per 1024bytes
- some registers layouts are a bit different, mainly due do the stronger
ECC.
- it uses USER_DATA_LEN registers along USER_DATA registers.
- it needs a specific clock for ECC and MBUS.
Introduce the basic support, with ECC and scrambling, but without
DMA/MDMA.
Tested on Whatsminer H616 board (with and without scrambling, ECC)
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The H6/H616 the SRAM is bigger than the A10/A23 one, so move its size
into sunxi_nfc_caps.
No functional change
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The H6/H616 error mask register is bigger than the A10/A23 one, so move
its mask into sunxi_nfc_caps.
No functional change
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The H6/H616 spare area register is not at the same offset as the
A10/A23 one, so move its offset into sunxi_nfc_caps.
No functional change.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The H6/H616 pattern ID register is not at the same offset as the
A10/A23 one, so move its offset into sunxi_nfc_caps.
No functional change.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The H6/H616 RANDOM EN/DIRECTION masks are different from A10/A23.
So move the masks into sunxi_nfc_caps.
No functional change.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The H6/H616 ECC_MODE field is not at the same offset, and has not the
same size.
So move the mask into sunxi_nfc_caps.
Also, introduce a non compile-time field_prep() because FIELD_PREP()
doesn't work with non compile-time constant.
No functional change.
Link: https://lore.kernel.org/all/cover.1761588465.git.geert+renesas@glider.be
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The H616 controller can't handle 512 bytes ECC block size. The
NFC_ECC_BLOCK_512 bit disappeared in H6, and NDFC_RANDOM_EN took its
place.
So, add has_ecc_block_512 capability to only set this bit on SoC having
it.
No functional change.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
On H6/H616, the register ECC_PAT_FOUND is at its own address, and not
part of ECC status register.
So, introduce the pattern found register offset in sunxi_nfc_caps, along
with its mask.
Also, introduce a non compile-time field_get() because FIELD_GET() and
u32_get_bits() don't work with non compile-time constant.
No functional change.
Link: https://lore.kernel.org/all/cover.1761588465.git.geert+renesas@glider.be
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The H6/H616 USER_DATA register is not at the same offset as the
A10/A23 one, so move its offset into sunxi_nfc_caps
No functional change.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The H6/H616 ECC_ERR_CNT register is not at the same offset as the
A10/A23 one, so move its offset into sunxi_nfc_caps
No functional change.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
H6/H616 has more ECC strenghts than A10/A23.
Move the ECC strenghts array to sunxi_nfc_caps to make it ready for
H6/H616 support.
No functional change.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The user data length (4) used all over the code hard coded.
And sometimes, it's not that trivial to know that it's the user data
length and not something else.
Moreover, for the H6/H616 this value is no more fixed by hardware, but
could be modified.
Using a define here makes the code more readable.
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The register NFC_REG_ECC_CTL was read twice and the result was not used,
then a third time with a mask applied.
Removing those calls didn't change the behavior.
Tested on H616 SoC, scrambling enabled.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
